Front brake cylinder 31.75 mm - SAMBRON
Front brake cylinder - Ø 31.75 mm - Sambron
(69,50 € HT)
Adapter connection 7/16 male - 3/8 female
Adaptateur freinage mâle 7/16 (envion 11mm) femelle 3/8
(17,50 € HT)
Master cylinder kit 38.1 mm - Renault Galion
Repair kit for 38.1 mm master cylinder.
(74,75 € HT)
Brake cylinder 28.5mm - entry 11mm (7/16th) - Peugeot Q3A
Brake cylinder 28.5mm - entry 11mm (7/16th) -
(65,00 € HT)
Remise en état lot de pièces spécifiques
(90,00 € HT)
segment set 85 mm 2x2x2x4x4 Renault Fregate
Set of 20 segments for 4 eyebolts dimension 85 mm - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 2 mm2 x scraper in 4 mmPossibility of ordering in 85 mm (call us)
(138,00 € HT)
copy of Oil pressure contact mano - Ford Vedette 1949 - 54
oil pressure switch for Ford Vedette engine from 1949 to 1954 - Thread M 10x100
(10,50 € HT)
Rear brake cylinder 19mm - 3/8 Panhard 24 - 07/1964 to end
Rear wheel cylinder 19mm - Panhard 24 équipé frein à tambours - 07/1964 à fin de série
(57,60 € HT)
Best Sellers
Ignition capacitor 6, 12 and 24V
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Rear brake cylinder 28.57 mm - 1 1/8 Renault Colorale, Prairie, R2087, Goelette
" Rear wheel cylinder. Diam: 1" "1/8 or 28.6 mm. Liquid inlet diameter = 11.4 mm (1/2 20 f / p) Renault Colorale, Prairie, R2087, Goélette, 1000 kg, 1400 Kg and derivatives . "
(75,35 € HT)
Front brake cylinder kit 34.9 mm - 1 3/8 Renault Prairie R2087 Goelette
Repair kit for AV cylinder. d 34.93 mm
(16,00 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,35 € HT)
Ignition - 4 x Spark plugs for Renault Fregate
Set of 4 NGK spark plugs with std base (14 mm), Renault Fregate, Colorale, Prairie engine (side engine 603 and tumbled 668 or 671), R2087, Goélette, Galion, SG2 gasoline (engine 671 or 817) etc. Compatible with SP95 and SP98 fuels
(20,00 € HT)
Best sellers There are 1556 products.
Ring set Ø 66.50 mm Simca 2.50x2.50x4 - 8cyl
Ring set Ø 66.50 mm Simca 2.50x2.50x4 - 8cyl
(156,00 € HT)
Ignition coil 12v VALEO
Ignition coil guaranteed for use with a 12 V platinum screw igniter (breakers). Impedance respected to prevent the breakers from bluing.Works perfectly also with electronic module or integral electronic igniter. (Non contractual photo)
(45,00 € HT)
Spark plug Motorcraft BRF 22 C x 4
4 x Motocraft AG 252 spark plugs-Ford Scorpio / Granada / Sierra ..See list on photos
(13,75 € HT)
Exhaust manifold paint - 250 ml
(40,00 € HT)
Manometer Tachometer - 2 - 4 - 6 - 8 cyl - electric 12V - black background - for negative to mass
Mano "OS" Tachometer 0 to 5000 rpm for 4-cylinder petrol engine. Connects to the "break" terminal on the ignition coil. 52 mm recess on the pressure gauge side. delivered with lighting. for negative to ground
(58,29 € HT)
Set of 34 Simca Chambord V8 cylinder head screws
Set of 34 black phosphated hexagonal head screws - 2 screw lengths in the set. Withstands up to 6 m.kgMounts on Simca Beaulieu, Chambord, Presidency Marly 2.
(138,80 € HT)
Set of 34 cylinder head screws V8 Simca Versailles 12V model 57'
Set of 34 black phosphated hexagonal head screws - 2 screw lengths in the set. Withstands up to 6 m.kgMounts on Simca Versailles (Trianon Régence Marly 1) original 12V model only. 57' model vehicle
(138,80 € HT)
Pinion oil pump mounted on axis - Ford Vedette
Replacement gear for oil pump - V8 Ford Vedette.Delivered riveted with new axle. (Advantageously replaces the celoron one that has become fragile over time)Attention for the V8 Simca 13 hp 2350 cm3, choose the reference "Simca oil pump pinion" on ...
(270,20 € HT)
Ring x 2 - gearbox lever or column foot - Simca Versailles Chambord
Set of 2 repair rings to replace the silent blocks of the gearbox levers or those at the bottom of the column - Simca Versailles Chambord.Requires 2 sets per vehicle
(32,00 € HT)
Renault Fregate Galion Goelette prairie petrol pump R2087
Fuel pump with priming lever and seal - Renault Fregate Galion Goelette prairie R2087
(60,00 € HT)
Spark plug extension x 4 - Citroen HY
Spark plug extension x 4 - Citroen HYGasoline engine from 1963 and end of series
(18,00 € HT)
Turbine water pump 60 mm - pulley 112mm - Renault Fregate, Prairie, Goelette, R2087, ...
Water pump complete with Ø 112 pulley for 17mm belt - is mounted on tumbled engine 668 or 671 Renault Frégate, Prairie, Colorale, R2087, Goélette, Galion, SG2 12cv, and derivatives. Ø 60 mm (cannot be mounted on type 817 - 2.6L engine). The pump ...
(240,00 € HT)
Insulating tube x4 for spark plug - Citroen HY
(18,00 € HT)
Mécanisme embrayage avec volant moteur sur mesure
(490,00 € HT)
Oil pressure contact mano - Ford Vedette 1949 - 54
oil pressure switch for Ford Vedette engine from 1949 to 1954 - Thread M 10x100
(10,50 € HT)
603 cylinder head gasket Renault side engine 85
Head gasket - Renault lateral 85 - 603.Please note that there are several versions depending on the type of 603. Check the shape with the photo and in particular the igniter passage hole located at the edge of half of the long length.
(130,00 € HT)
Simca Versailles Chambord gearbox supports
(102,80 € HT)
Joint latéral - moteur Renault 603 - LATERAL 85
Joint latéral - moteur Renault 603 - LATERAL 85 (Colorale, Goélette, 1ère génération etc)
(25,00 € HT)
Tige culbuteur pour moteur type Frégate
(22,00 € HT)
Segment set Ø 66.04 mm Simca Chambord 2.38x2.38x5 - 8cyl
Segment set Ø 66.04 mm Simca 2.38x2.38x5 - 8cyl
(160,00 € HT)
603 gasket kit (without cylinder head gasket) - Renault lateral engine 85
gasket kit (without cylinder head gasket) - Renault engine 603 side 85Please note that there are several versions depending on the type of 603. Check the shape with the photo and in particular the igniter passage hole located at the edge of half ...
(131,16 € HT)
Segment set Ø 66.80 mm Simca Chambord 2.38x2.38x5 - 8cyl
Segment set Ø 66.80 mm Simca 2.38x2.38x5 - 8cyl
(182,00 € HT)
Renault Fregate Transfluide 39.5 mm inlet valve
Inlet valve 39.5 mm for Renault Fregate Transfluide engine ONLY
(40,00 € HT)
Aviation collex type paste gasket for cylinder head - 450ml
Sealing paste to be applied on both sides of a cylinder head gasket. Product similar to "Collex". Leave to evaporate for about 30 min at room temperature after application, then fit the gasket - improves the seal - recommended with solid copper ...
(35,00 € HT)
copy of Segment set Ø 66.80 mm Simca Chambord 2.38x2.38x5 - 8cyl
Segment set Ø 66.80 mm Simca 2.38x2.38x5 - 8cyl
(248,00 € HT)
gasket for solex 32 pbic carburetor
2 x paper gaskets for Solex 32 pbi carburetor base.Fixing center distance: 60 mmCentral passage: 32 mmTotal length: 78 mmwidth: 50mm
(3,80 € HT)
Handle fuel pump - Simca Versailles Chambord
Handle fuel pump - Simca Versailles ChambordDelivered with seal
(76,00 € HT)
Turbine water pump 70 mm - pulley 112mm - Renault Tp3 SG2
Complete water pump for engine type 817 - 2.6L. The pump is delivered with its seal as in the photo.
(240,00 € HT)
copy of Oil pressure contact mano - Ford Vedette 1949 - 54
oil pressure switch for Ford Vedette engine from 1949 to 1954 - Thread M 10x100
(10,50 € HT)
Set of 78mm flat piston liners - Citroen HY with Traction engine - Before 1963
Set of 4 liners + 4 complete flat head pistons (segments, clips, pins) - Quality segments.Bore Ø 78 mm - For Citrien HY engine before 1963 (Traction type engine with cast iron cylinder head)total height of jacket 185.50 mm top / base height ...
(370,00 € HT)
Valve guides x 4 ADM ECH - 9x61x 15.25 REPAIR - Renault Fregate - Prairie - Goelette - R2087 - SG2
Set of 4 valve guides (cast iron) 61 x Ø 15.25 (repair dimension) - Ø int 9 mm - ADM and ECH - Fitting on 668 - 671 - 817 Renault petrol engine. Suitable for cylinder heads fitted with 2 rocker arms separated by the central greasing tee.French made.
(70,00 € HT)
Cartridge air filter - Citroen HY before 1963
Cartridge air filter - Citroen HY before 1963Dimensions on the photo
(21,58 € HT)
Oil breather plug - Renault Goelette R2087 Fregate Prairie
Oil breather plug - Renault Goelette R2087 Fregate PrairieDelivered with seal - original Renault product
(32,00 € HT)
PALIER CAOUTCHOUC - SUPPORT - BOÎTE DE VITESSE - CITROEN HY
(40,00 € HT)
Piston x 4 Ø 85.00 mm - Renault engine 603 - lateral - 4 cylinders
set of 4 piston Ø 85.00 mm - Renault lateral motor 603
(980,00 € HT)
Piston x 4 Ø 86.00 mm - Renault engine 603 - lateral - 4 cylinders
Set of 4 piston Ø 86.00 mm - Renault lateral motor
(980,00 € HT)
Radiator cap + seal - Citroen HY before 1964 - Traction
Radiator cap + gasket - Citroen HY avant 63 - TractionØ 58 mm inside
(40,60 € HT)
Base gasket x4 - Ø 93 ep 1.05 mm- Renault Fregate etc.
Set of 4 base gaskets (sleeve Ø 93 mm) all copper thickness 1.05 mm (approximately) for Renault type 671 engine (Colorale, Goélette, R2087, Frégate, etc.)
(45,00 € HT)
Transmission spider wheel side - Renault Frégate all models
Wheel side transmission spider - Renault Frégate all models Sold individually with grease nipple.
(50,00 € HT)
Clutch mechanism 3 fingers 10L22 - Renault Prairie Goelette
Clutch mechanism reconditioned, in standard exchange. Fitted on Renault Colorale, Prairie, Goélette, Galion, R2087 and derivativesComplete disassembly, micro balling, surfacing and retaring of the pressure plate.(The sending is done after receipt ...
(420,00 € HT)
Set of side shims for Renault crankshaft 1.65mm (original) engine 668 671 817
Set of 2 side shims for 1.65 mm crankshaft (original).For Frégate, Colorale, Galion, Goélette, SG2, R2087 engines
(35,00 € HT)
Pignon distribution céloron 52d - moyeu 38mm - neuf stock d'époque - Renault moteur 603
Pignon distribution céloron 52 dents - alésage 38 mm - neuf stock d'époque - Renault moteur 603 14cv ("85 latéral"). Ne convient pas aux moteurs culbuté 668, 671 et 817
(180,00 € HT)
Carburetor similar to the Solex 32 PBIC type for Renault engine 603
New carburettor similar to the Solex 32 PBIC type. Vacuum outlet on foot base. Equipped for Renault engine 603 and derivatives
(185,00 € HT)
Axe 8 mm avec papillon pour réparation carburateur Solex 32 PBIC ou similaire
(18,29 € HT)
Shaft 8.5 mm Ø repair - repair Solex 32 PBIC carburettor or similar
Shaft dimension repair 8.5 mm with butterfly for repair carburettor Solex 32 PBIC or similarOverall length 91.5 mm
(18,29 € HT)
Fuel needle - Solex 32 PBIC carburettor or similar
Fuel needle - Solex 32 PBIC carburettor or similar
(9,90 € HT)
Segment clearance Ø 72 mm - 2.5 x 2.5 x 3 x 4 - Simca 9 - Aronde
Set of 16 segments for 4 pistons dimension Ø 72 mm - Simca 9 or Aronde enginecomposition per plunger:4 x fire segment 2.5 mm4 x compression in 2.5 mm4 x compression in 3 mm4 x scraper in 4 mmPossibility to order in 85 mm (call us) - ...
(103,00 € HT)
Kit of 3 camshaft rings + installation tool - Renault fregate prairie Goelette engine 671
Kit 3 camshaft bushes and installation tool- Renault Frégate Prairie Goelette engine 671 standard dimension
(325,80 € HT)
Segment clearance Ø 72 mm - 2.5 x 2.5 x 2.5 x 5 - Simca 9 - Aronde
Set of 16 segments for 4 pistons dimension Ø 72 mm - Simca 9 or Aronde enginecomposition per plunger:4 x fire segment 2.5 mm4 x compression in 2.5 mm4 x compression in 2.5 mm4 x scraper in 5 mmPossibility to order in 85 mm (call us) - ...
(103,00 € HT)
Alternator for switching to 12V - 50 A
(180,00 € HT)
exhaust valve 35 mm 4 notches - Renault Fregate Prairie Goelette
Exhaust valve 35 x 9 long 116 mm for Renault Fregate engine and derivatives (used part)
(30,00 € HT)
copy of Set of segments STD 85.50, oversize 0.50 mm Renault Fregate
Set of 16 segments for 4 pistons, special dimension 85.50 mm reaming - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 3 mm2 x scraper in 4.5 mmPossibility of ordering in 85 mm (call us)
(138,00 € HT)
segment set 85 mm 2x2x2x4x4 Renault Fregate
Set of 20 segments for 4 eyebolts dimension 85 mm - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 2 mm2 x scraper in 4 mmPossibility of ordering in 85 mm (call us)
(138,00 € HT)