Rubber teat end for brake reservoir

" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "

Copper gasket 15.3 x 21

Copper gasket 15.30 x 21.00 th 1mm

€1.80 TTC
(1,50 € HT)

Copper gasket 11.50 x 20

Copper gasket 20x11.50 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm

Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)

Copper gasket 13.5x20.5

Copper gasket 13.50 x 20.50 th 1mm

€1.80 TTC
(1,50 € HT)

Silicone brake fluid DOT 5 - 1L

" DOT 5 100% silicone brake fluid - 1L can - Purple color - Do not mix with other types of brake fluids. The installation must be rinsed before changing the type of liquid. Photo not contractual. "

Copper gasket 19 x 24

Copper gasket 24x19 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

Metal insert tip for jar

Metal fitting to be fitted with the brake reservoir rubber to prevent the tearing and accidental draining of the brake fluid reservoir.

Copper pipe fitting 7/16 - ext thread 11mm

Rigid brake line nut. 7/16 or about 11 mm measured on the external thread and Ø hole for the tube = 6.35mm

Special brake grease tube - 5g

Tube of special braking grease (5gr), Lockheed DOT and silicone compatible, protects steel cylinder and piston parts, helps them slide, compatible with rubber parts.

Dot 4 brake fluid

Dot 4 brake fluid - 500ml can. Non contractual photo

Rear brake cylinder Ø 28.5 mm Citroen HY

Rear brake cylinder for Citroen HY or type H piston diameter = 28.5 mm. (from 1967, until the end)French made.

€71.52 TTC
(59,60 € HT)

Special brake grease tube - Plastilub ATE - 75 ml

Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!

Copper gasket 10 x 18

Copper gasket 18x10 mm thickness 1mm

€1.92 TTC
(1,60 € HT)

Copper gasket 10.5 x 20

Copper gasket 10.5 x 20 thickness 1mm

€1.80 TTC
(1,50 € HT)

Brake reservoir with rubber

Translucent tank, delivered with bracket; rubber plug and fitting.

set 4 front brake cylinder 31.7mm -Citroen HY - H - HZ

Set of 4 front brake cylinders (internal diameter 31.75 mm) can be mounted on all HY, type H, Hz and Traction 15/6Includes 2 cylinders with bleeder G and D + 2 cylinders without bleeder G and D. The braking parts we sell are made in France.

€418.20 TTC
(348,50 € HT)

3/8 - 24 f copper pipe fitting

Rigid brake line nut. 3/8 x 24 threads / inch. Tube Ø 4.75 mm

Copper gasket 13.1 x 18

Copper gasket 13.1 x 18 mm thickness 1mm

€1.92 TTC
(1,60 € HT)

Complete master cylinder 25.4 mm - HY Citroen

Complete master cylinder D 25.4 mm for Citroën HY single circuit. For vehicles before 1975.Piston 1 p or 25.4 mm1/2 output 20 f per inchEntry about 17 mm60 mm center distance for M 8 screws

€62.40 TTC
(52,00 € HT)

Front brake hose 328 mm - Citroen HY - June 1963 to end

FRONT brake hose for Citroen from June 1963 to end of series. The end caps are different from each other)Long 328 mm

Copper seal 10.2 x 13.5

Copper gasket 10.2 x 13.5 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

7/16 female connection on 6.35 mm tube

7/16 connection on 6.35 mm tube

Copper gasket 16 x 21

Copper gasket 16 x 21 1.5mm thick

€1.80 TTC
(1,50 € HT)

Copper gasket 13.1 x 17

Copper gasket 13.1 x 17 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

1/2 female 20 UNF connection on 8 mm tube (metal brake jar)

Metal tank foot nut (female 1/2 and d 8mm)

Brake reservoir with nipple + contact

Brake fluid reservoir, translucent plastic.With plug, fixing bracket and electrical contact for minimum liquid level

Brake line - from 51 to 99 cm

Brake line remanufactured on request, only in copper diameter 6.35 mm. Large model, length from 50 cm, max 2m. Provide model (length and 2 original tips)Shipping after receiving your model.

Adapter connection 1/2 UNF female - 3/8 UNF male

Braking adapter 1 / 2-20 UNF female by 3/8 24 male threads

Adapter connection 7/16 UNF female - 1/2 UNF male

Adapter connection 1/2 UNF male - 7/16 UNF female

Rear brake hose with double connections on pipe - 320 mm - Citroen HY - after 1970

Brake hose for Citroën HY. Model equipped with fittings allowing connection with rotating nut on rigid pipe on both sides. Often fitted after 1970 - Long 320 mm. Only for synthetic liquid (Dot 3, Dot 4). For use with LHM call us

Brake line - from 0 to 50 cm

Brake line remanufactured on demand only in copper diameter 6.35 mm. Small model, length less than 50 cm. Provide model (length and 2 original tips) Shipping after receipt of your model.

Male connector 12x100 on 6.35 mm pipe

Male connector 12x100 on 6.35 mm pipe

Hose 7.5x13.5 - brake jar / master cylinder - 1ml - Synthetic liquid DOT 4

Hose sold by the meter for jar connection to master cylinder (7.5 mm plastic nipple connection) - 13.5 mm outsideDoes not withstand pressure. TYPE EPDM + textile reinforcement - intended only for synthetic fluid type DOT 4 - Not suitable for ...

€9.90 TTC
(8,25 € HT)

Citroen HY rear brake cylinder 19mm

Rear brake cylinder for Citroen HY or type H piston diameter = 19 mm.All the brake parts we sell are made in France.

€94.80 TTC
(79,00 € HT)

Pipe connection 1/2 20 UNF - 8 mm tube - special jar - 12.5 mm thread ext.

Rigid brake line nut. 1 / 2-20 UNF i.e. Ø 12.5 mm - drilling for 8 mm tube special brake reservoir

Brake line - from 100 to 150 cm

" Brake line remanufactured on request, only in copper diameter 6.35 mm. . Provide model (length and 2 original end caps) Shipment after receipt of your model. "

Raccord adaptateur 1/2 UNF mâle - 3/8 UNF femelle

Adaptateur freinage  1/2-20 UNF mâle par 3/8 24 filets femelle  

Fuel pump - GUIOT 90 mm diaphragm kit Citroen Traction U23 HY

Replacement diaphragm for GUIOT fuel pump (Citroen Traction U23 HY engine). Ø 90mm. Supplied with membrane and gaskets. (check the type of pump before ordering)

Rear brake hose D 400mm - Citroen HY - from June 1963 to the end

Brake hose REAR RIGHT for Citroen from June 1963 to end: HZ HY HWLong 400 mm

Rear brake hose G 432mm - Citroen HY - from June 1963 to the end

Brake hose REAR LEFT for Citroen from June 1963 to end: HZ HY HWLong 432 mm

Rear wheel brake hose - 380mm Citroen HY until 06/1963

Brake hose length 380 mm - male end 17 mm - for Rear wheel L or R Citroen HY type H, 1948 to June 1963Made in France

Brake switch - STOP - spring-loaded

Mechanical brake switch. STOP light function. To be fixed on bodywork or chassis.

Set of 4 rear brake shoes HY or type H Citroen

Set of 4 rear brake shoes - standard exchange. (Send us your game before shipping the new one). High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes.

€126.00 TTC
(105,00 € HT)

Set of 4 front brake shoes 55 mm - HY or type H Citroen - 02/1962 to 1981

Set of 4 front brake shoes 55 mm - HY or type H Citroen - 02/1962 to 1981 - standard exchange. (Send us your set before shipping the new one). High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled ...

€180.00 TTC
(150,00 € HT)

Front brake hose 380 mm - Simca 6

Front brake hose 380 mm - Made in France - Simca 6

Citroen HY type H brake limiter distributor

Citroen HY type H brake limiter distributor

Front wheel brake hose - 380 mm Citroen HY until 06/1963

Brake hose length 380 mm - male end 17 mm - for Front wheel L or R Citroen HY type H, 1948 to June 1963Made in France

Set of 4 front brake shoes 45 mm - HY or type H Citroen - until 02/1962

Set of 4 front brake shoes - standard exchange. (Send us your set before shipping the new one). High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes.

€134.90 TTC
(112,42 € HT)

Adapter fitting 3/8 UNF Male - 10x100 female

Adapter fitting 3/8 UNF Male - 10x100 female

Adapter fitting 1/2 UNF Male - 1/2 UNF female with internal bicone

Adapter fitting 1/2 UNF Male - 1/2 UNF female with internal bicone

Handbrake cable left or right from 1963 - Citroen HY

Handbrake cable for left or right wheel - 1963 end of series (ID19 engine) - Citroen HYYou need 2 per vehicle (sold individually)

Canalisation Ø 8 mm bocal vers maitre cylindre - 1 m

Canalisation de frein refabriquée à la demande, uniquement en cuivre diamètre 8 mm

Adapter connection 7/16 male - 11/16 female

Adaptateur freinage  mâle 7/16 (envion 11mm) femelle 11/16 pour recevoir gros flexible (17mm mâle

Citroen HY 22mm rear brake cylinder

Rear brake cylinder for Citroen HY or type H piston diameter = 22 mm. (until 1966)All the brake parts we sell are made in France.

€76.74 TTC
(63,95 € HT)

Citroen H and HY tandem master cylinder

Tandem master cylinder (dual circuit) 25.4 mm fitting citroen HY from 1975

€429.60 TTC
(358,00 € HT)

Brake line - from 150 to 200 cm

Brake line re-manufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original end pieces)Shipping after receiving your model.

Brake limiter distributor - set of springs - Citroen HY type H

Spring set for brake distributor brake limiter Citroen HY type H

Adapter fitting 7/16 Male - 7/16 female outgoing cone

Adapter fitting 7/16 Male - 7/16 female outgoing cone

Tailor-made front or rear brake hose

Tailor-made flexible front or rear fein. A simple call will allow us to determine your type of hose and its length.Same price as a standard model. Citreon HY, type H, HZ, HW.Non-contractual image.

Brake line - from 200 to 250 cm

Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.

Contacteur stop mécanique - Citroen HY

Springs - set of 8 for front brake - Citroen HY - type H

Springs - set of 8 for front brake - Citroen HY - type HSet for 2 front wheels

Adapter connection 7/16 male - 1/2 female

Adaptateur freinage mâle 7/16 (envion 11mm)femelle 11/16 pour recevoir gros flexible (17mm mâle

Brake pipe - from 300 to 350 cm

Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.

Brake pipe - from 250 to 300 cm

Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.

Flexible fem fem / tube 4.5 mm - 340mm - Citroen HY

Ressort frein arrière - Citroen HY - type H