Brake line - from 51 to 99 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Large model, length from 50 cm, max 2m. Provide model (length and 2 original tips)Shipping after receiving your model.
(42,00 € HT)
Hose 7.5x13.5 - brake jar / master cylinder - 1ml - Synthetic liquid DOT 4
Hose sold by the meter for jar connection to master cylinder (7.5 mm plastic nipple connection) - 13.5 mm outsideDoes not withstand pressure. TYPE EPDM + textile reinforcement - intended only for synthetic fluid type DOT 4 - Not suitable for ...
(10,50 € HT)
Brake line - from 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 6.35 mm. Small model, length less than 50 cm. Provide model (length and 2 original tips) Shipping after receipt of your model.
(29,50 € HT)
kit de reparation servofrein Hydrovac Ø 185 mm - Peugeot 404, Renault R8, Saviem
Hydrovac Ø 185 mm brake servo repair kit - Supplied with valve and residual valve.Peugeot 404, Renault R8, Saviem.
(158,33 € HT)
7/16 banjo fitting + 7/16 hollow screw + seals
7/16 banjo fitting + 7/16 hollow screw + sealsDiameter male thread of the screw 11 mm
(27,95 € HT)
Brake cylinder 28.5mm - entry 11mm (7/16th) - SAMBRON dump truck
Brake cylinder 28.5mm - entry 11mm (7/16th) - SAMBRON dump truck
(65,00 € HT)
Special brake grease tube - Plastilub ATE - 75 ml
Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!
(11,50 € HT)
1/2 female 20 UNF connection on 8 mm tube (metal brake jar)
Metal tank foot nut (female 1/2 and d 8mm)
(9,25 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Rear brake cylinder rebuild kit 25.4 mm - VLR DELAHAYE
Repair kit for 1 rear wheel cylinder 25.4 mm. Supplied with pistons and spring.For all models.
(21,85 € HT)
Brake pipe - from 250 to 300 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.
(155,00 € HT)
Set of 4 front brake shoes Mercedes 190 SL
Set of 4 front brake shoes in standard exchange. (Send us your set before shipping the new one)High performance friction, applied by industrial bonding, no more rivets damaging the drums. Micro blunt brake shoes.(Non contractual photo)
(150,00 € HT)