Front brake hose - 295 mm - Simca 1000

Brake hose for Simca 1000 - L 295 mm

Set of 4 complete pistons (piston pin) Ø 59.00 mm - Renault NN

Set of 4 complete pistons (pin segments clips) Ø 59.00 mm - Renault NN -

Set of 4 Complete Pistons Ø 69.00 mm - Peugeot 202

Set of 4 Complete Pistons Ø 69.00 mm - Peugeot 202

Complete piston - set of 4 - Ø 72.00 mm - Citroen B14

Set of 4 pistons Ø 72.00 mm - Citroen B14

Segment set Ø 75 mm Peugeot 203 403 - 7cv - 2.5x2.5x4.5

Segment set Ø 75 mm Peugeot 203 403 - 7cv - 2.5x2.5x4.5

Front brake hose - 470mm - Peugeot D3

Front brake hose Peugeot D3 D3A D3B etc. Length 470 mm. tip Ø 17 mm approximately

Simca Chambord 61 front hub kit

Front hub repair kit with D 20mm spindle, for Beaulieu, Chambord, Présidence and Marly 2 model 61.1 outer conical bearing1 internal conical bearing1 sealed ringValid for one wheel. Attention do not mount on model 1958 to 60 with Ø 19 mm ...

solid copper cylinder head gasket 3mm Simca Versailles Chambord

Solid copper cylinder head gasket. Thickness 3 mm. Used with very planed cylinder head. For V8 Simca Trianon, Versailles, Régence, Beaulieu, Chambord, Présidence, Marly 1 and 2, Ariane 8. Also exists in 2mm version (available on the ...

Rubber bush kit - silentblocs for Ford Vedette front axle

Kit including dust covers and other grease covers to remake the front axle, including those for the stabilizer bar. The set includes:4 x ring (ref Ford 3193)4 x steering ball joint grease cover4 x grease cover on upper triangle axle - chassis ...

Citroën Traction lower hose

Citroën Traction lower hose

Ignition - round head igniter Ducellier

Finger for igniter equipped with Ducellier round head

Rear shock absorber x 2 Citroen HY 70 and +

Pair of Record rear shocks. Mounts on Citroen HY from 1970 and until the end.

Set of 8 pistons 67.00 Ford Vedette

Set of 8 pistons - New manufacture, similar to the original model - reduction in piston mass (approx. 255 gr with segments) - molybdenum treatment - cylinder dimension 67.00 mm. Supplied with segments, pins and circlips - The segments supplied ...

Rod bearings Renault Goelette Fregate dimension 0.50 - 54.50 mm

Set of 8 connecting rod bearings (with lubricating hole for the connecting rod) dimension 0.25 crankpin d 44.50 mm - Renault, Colorale, Goélette, R2087, Frégate, SG2, etc).Mounts on engine 668 - 11cv - 2L, 671 - 12cv - 2.2 L and Super Etendard ...

Front shock absorbers Simca Aronde 51 a 58

Front shock absorbers for Simca Aronde from 1951 to 1958 (spring leaves)Record brand, 100% conforms to the original assembly.Price of the pair.

Rod bearings Ford Vedette 53-54 or Simca Chambord - 040 - 43.57 mm

" Set of bearings (16 half-shells) for Ford Vedette 2nd generation 1953-54 and Simca V8 engines. Dimension: .040 US (1 mm) Each connecting rod receives its pair of bearings. "

Ford Anglia low engine gasket set

Set of gaskets for low engine (without cylinder head gasket). To be completed with the high engine pouch.

Ford Anglia high engine gasket set

Gasket set, high engine, with cylinder head gasket.

Front or rear brake hose 470 mm

Front or rear brake hose 470 mm long. male thread 17mm approx

jeu de 3 plots isolants pour cerclo volant Ford Vedette

Rear brake cylinder - VLR DELAHAYE

" Rear brake cylinder. D 1" "(25.4 mm). Mounts on all models. Sold individually (1 cylinder per wheel) "

€52.20 TTC
(43,50 € HT)

Carburetor 32 PBICA - Peugeot 403 and 404

Carburateur neuf type Solex 32 PBICA. Se monte sur Peugeot 403  404. Selon modèle ajuster gicleurs, buse et réglages  

Breather for cylinder head cover - Citroen HY

Breather for cylinder head cover - Citroen HYPetrol engine from 1963

Répartiteur frein - Renault SG2

Clutch mechanism type 3 - fits to clutch disq using springs - Citroen HY

Clutch mechanism reconditioned, in standard exchange mounted on HY engine (aluminum cylinder head).Complete disassembly, micro balling, surfacing and retaring of the pressure plate.(The sending is done after receipt of the used mechanism, not ...

€378.00 TTC
(315,00 € HT)

Seals for 4 glasses - Peugeot 203 family

Seals for 4 glasses - Peugeot 203 family

Fuel filter + gaskets - Peugeot 404 injection

Fuel filter + gaskets - Peugeot 404 injection engine

Heating valve with lever Ø 11,8 mm

Heating valve with lever Ø 11,8 mm. Synthetic material (no corrosion problem). Length connection end to other: 84 mm

Master cylinder Ø 25.4 mm - Peugeot 403

Repair kit for Ø 25.4 mm master cylinder

€27.00 TTC
(22,50 € HT)

Front RIGHT brake cylinder 22 mm - Renault 4CV - feb 56 end of series

Front RIGHT brake cylinder 22 mm - Renault 4CV - feb 56 end of series

€72.00 TTC
(60,00 € HT)

Sliding side door seal. - Peugeot D3 D4

Set of 2 windscreen gaskets for Peugeot D3 or D4.

copy of lampe 12V 21 w

Master cylinder - Beginning to Nov 57 - Simca Utility 500 kg

Master cylinder, supplied complete with 25.4 mm bellows.Master cylinder - Beginning to Nov 57 - Simca Aronde Utility 500 kg

€132.60 TTC
(110,50 € HT)

connecting rod bearing STD - Ø 40.00 - Simca 9 - 1200 cm3

connecting rod bearing STD - Ø 40.00 - Simca 9 - 1200 cm3(does not mount on Flash or Rush)

Valve guide x4 - + 0.05 MM - 8.5x14.11x56.50 - Peugeot 203 - 403

Set of 4 cast iron inlet and exhaust valve guides: outer bore repair dimension + 0.6 = Ø 14.11 - 8.5x14.11x56.50Peugeot 203 and 403, 1290cm³ TM4 TMP4 D4A engines, inner diameter 8.5mm, diam. ext. 14.05mm, length 55.4mm.(8 guides per cylinder head)

Front brake hose 356 mm - Peugeot 404 sedan - injection coupé cabriolet according to year

Front brake hose, length 412 mm - please check the correspondence with your model before ordering.- 404 Saloon 07/60 end of series- 404 Sedan and diesel 09/63 to 10/65- Injection sedan, coupe and convertible 04/62 end of series EXCEPT ...

Right bearing kit + rear hub spinnaker - Simca 6

Kit composed of:1 x straight bearing1 x waterproof ring (sp)Allows to equip 1 rear hub - Simca 6

Piston liners kit Ø75.70 Renault R8 GORDINI - mot 812 - 1296 CM3

Piston liners kit Ø75.70 Renault R8 GORDINI - mot 812 - 1296 CM3

Master cylinder 22mm - Peugeot 404 ALL models except Thermostable

Brake master cylinder 22mm - Peugeot 404 ALL models except Thermostable - Outlet Ø 1/2 20 f / p

€91.20 TTC
(76,00 € HT)

Set of 4 FRONT brake shoes relined Renault SG2

Set of 4 front brake shoes relined in standard exchange for Renault SG2. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets that could damage the drums. Shipping upon receipt of worn parts.

€300.00 TTC
(250,00 € HT)

Ford Vedette gearbox primary shaft groove bearing

Bearing 40x80x18 with locking groove, special Ford Vedette gearbox

Segment set Ø 75 mm Peugeot 203 403 - 7cv - 2x2x4.5

Segment set Ø 75 mm Peugeot 203 403 - 7cv - 2x2x4.5

Kit 3 camshaft bushes x 3 - Ford Vedette

Kit 3 camshaft bushes x 3 - Ford Vedette 12hp engine

Front brake cylinders x2 28.5mm - Simca Aronde 500 kg P60 Ranch nov 57 a end

Front wheel cylinder R - d 28.57 mm. 3/8 entry Left side mounting. Length 72 mm - inside liquid passage = 8.5 mm. Assembly:- Simca Aronde 500kg nov 57 to 05/62,- Simca P60 500kg and Ranch 12/59 at the end.

€168.00 TTC
(140,00 € HT)

Front or rear brake cylinder 25.4mm - Simca Aronde until Sept 51

Front and rear wheel cylinder d 25.4mm - Simca 9 Aronde up to seven 51

€52.20 TTC
(43,50 € HT)

Valves x 4 - ADM Ø 35x8.5x116.4 - Peugeot 203

Valves x 4 - ADM Ø 35x8.5x116.4 - Peugeot 203

Valves x 4 - ADM Ø 37x9x109 - plate - Citroen Traction 11D

Set of 4 ADM valves Ø 37x9x109 - flat - Citroen Traction 11D

Valves x 4 - ADM ECH Ø 32x8x129.7 - Citroen B2 B12

Set of 4 ADM ECH valves Ø 32x8x129.7 - Citroen B2 B12

Rear brake hose - 295 mm - Simca 1000

Brake hose for Simca 1000 - L 295 mm

Front brake cylinder D - Ø 22 mm - Simca 1000

Front wheel cylinder R - Ø 22 mm

€90.00 TTC
(75,00 € HT)

Front brake cylinder L - Ø 22 mm - Simca 1000

Front wheel cylinder L - Ø 22 mm

€90.00 TTC
(75,00 € HT)

Complete piston x 4 - Ø 71.00 mm - Citroen B14

Set of 4 pistons Ø 71.00 mm - Citroen B14

Piston x 4 Ø 69.50 mm - Citroen B2 B12

Set of 4 pistons Ø 69.50 mm - Citroen B2 B12. Sold with segments - pins - circlips. segments 2.2 x 2.5 x 3.5 x 3.5

Peugeot D4 gearbox outlet seal

Sealing ring ("spinnaker") for Peugeot D4 gearbox outlet43x60 mm

Rear brake hose - 254mm - Peugeot D3

Rear brake hose Peugeot D3 D3A D3B etc. Length 254 mm. tip Ø 17 mm approximately

Pompe à essence Ford anglia 105E 106 E

Pompe à essence pour Ford Anglia 105E et 106 E

Exhaust - stainless steel oval silencer - Ford Vedette

Stainless steel silencer for Ford Vedette.

€454.80 TTC
(379,00 € HT)

Rear brake cylinder kit 28.5 mm CItroen U23

Repair kit for 1 rear wheel cylinder 28.5 mm includes:Kit for one cylinder.

€43.32 TTC
(36,10 € HT)

Sealing ring for front hub 40x80 (1st generation) - Renault colorale

Watertight ring (spinnaker) for front drum for Renault Goélétte 1st generation equipped with side engine 603.size 40x80 mm

Set of 8 pistons 66.50 Ford Vedette

Set of 8 pistons - New manufacture, similar to the original model - reduction in piston mass (approximately 255 gr with rings) - molybdenum treatment - cylinder dimension 66.50 mm. Supplied with segments, pins and circlips - The segments supplied ...

Set of 8 pistons 67.50 Simca Versailles Chambord

Set of 8 pistons dimension 67.50 mm, complete (with segments, pins and clips). Aluminum body, quality segmentation with spring-loaded oil scrapers. Flat heads. Mounts on Simca Trianon, Versailles, Régence, Beaulieu, Chambord, Présidence, Marly I ...

Banjo adapter for SUMB Marmon master cylinder

Adapter for connecting the inlet of an 18 mm master cylinder to the original tube that goes to the jar. When the old models are in diam. 22mm, the adapter is essential to connect the tube from the jar.The set consists of: 2 copper gaskets, a ...

€50.40 TTC
(42,00 € HT)

Rear cylinder - Peugeot 202 UH

Rear brake cylinder D 1 '1/4 (31.75 mm), flange round 36 mm, fluid inlet 11.5 (7/16). Mounts on Peugeot 202 UHSold individually (1 cylinder per wheel). Non contractual photo

€84.00 TTC
(70,00 € HT)

Brake hose 412 mm front Dyna Z

Front brake hose Dyna Z Panhard - 1954 to June 1958 - length 412 mm

Renault Fregate 1955-60 rear shock absorbers

Pair of Record rear shock absorbers for Renault Fregate from 1955 to 1960 all models (Amiral, Domaine, Manoir, Grand Pavois).Mounting threaded rod up and down.

Head gasket solid copper 3 mm Ford Vendome Comete

Solid copper cylinder head gasket. Thickness 3mm. Used with very planed cylinder head. Mounts on Ford Vendôme, Comète, V8 21 and 22 hp.Tightening at 5m.kg. Installation with aerosol sealant is imperative.  

Rosengart crankshaft front bearing

Double row ball bearing, front crankshaft bearing assembly (timing side) for LR2, LR4, LR4N2 engines and derivatives.

Rod bearings Ford Vedette 53-54 or Simca Chambord - 030 - 43.83 mm

" Set of bearings (16 half-shells) for Ford Vedette 2nd generation 1953-54 and Simca V8 engines. Dimension: .030 US (0.75 mm) Each connecting rod receives its pair of bearings. "

Ford Anglia thermostat or calorstat

Thermostat (or calorstat) located at the top outlet of the cylinder head.

Front brake cylinder kit 34.9 mm CItroen U23

Repair kit for 1 front wheel cylinder 34.9 mm includes:Kit for one cylinder.

€66.00 TTC
(55,00 € HT)

Light switch - 4 positions off-side light-low beam-headlight

4-position lighting switch for dashboard:off-sidelight-low beam-headlight

lampe 6v 3W ba9s

SIMCA Vedette Versailles Chambord nameplate

Simca Chambord wheel shaft stop ring

cable de frein a main SG2

Set of 4 relined rear brake shoes - FIAT 508 Ballila

Set of 4 relined brake shoes (Fr) standard exchange. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets which can damage the drums.Shipping upon receipt of worn parts.

€110.40 TTC
(92,00 € HT)

White-Gray gear lever knob for Simca Versailles et Beaulieu dashboard

Gear shift knob, in Simca Versailles and Beaulieu white-gray lacquered resin, with insert for thread, according to the original

copy of Pistons liners kit Ø 58.00 mm Renault 670.1 - 800.01-02 - 845 cm3 Dauphine - R4

Pistons liners kit Ø 58.00 mm Renault 670.1 - 800.01-02 - 845 cm3 Dauphine 4L- R4

Ring x 2 - gearbox lever or column foot - Ford Vedette and derivatives

Set of 2 repair rings to replace the silent blocks of the gearbox levers or those at the bottom of the column - Ford Vedette and derivatives.Requires 2 sets per vehicle

Double circuit master cylinder Saviem Sg3 and derivatives

Double circuit master cylinder Saviem Sg3 and derivatives

€648.00 TTC
(540,00 € HT)

Springs - set of 8 for front brake - Citroen HY - type H

Springs - set of 8 for front brake - Citroen HY - type HSet for 2 front wheels

Coupling rod with ball joints - Simca 9 - Aronde - P60

Coupling rod with ball joints - Simca 9 - Aronde - P60Comes with a left ball joint and a right ball jointThis more reliable assembly avoids having to replace the 2 rubber silent blocks.

Fuel gauge with float 6V - Traction

" 6 volt float fuel gauge for Traction. "

Sealing plate bearing cap 11CV PERFO - Citroen Traction U23 HY

Sealing plate bearing cap 11CV PERFO - Citroen Traction U23 HY

Cylindre de frein avant Droit - d 31.75 mm - incliné - Panhard Z1

€136.80 TTC
(114,00 € HT)

various port

Front LEFT brake cylinder 22 mm - Renault 4CV - feb 56 end of series

Front LEFT brake cylinder 22 mm - Renault 4CV - feb 56 end of series

€71.16 TTC
(59,30 € HT)

Regulator converter 12v to 6V 15 A (wiper - ventilation)

Set of 2 deflector gaskets - Peugeot 203 sedan

Set of 2 deflector gaskets - Peugeot 203 sedan

Set of 2 front door seals L and R - Citroen HY

Set of 2 front door  adaptable - Citroen HY

TRANSMISSION INTERMEDIATE BEARING KIT - RENAULT FRÉGATE

TRANSMISSION INTERMEDIATE BEARING KIT - RENAULT FREGATECOMPOSITION: 2 waterproof rings + 1 bearing

Gearbox oil seal - Renault Fregate TRANSFLUIDE

Gearbox oil seal - Renault Frégate TRANSFLUIDE30x45

Master cylinder - Nov 57 to 06/62 - Simca utility 500kg

Complete master cylinder. Diameter 25.4 mm.Dovetail BreakUtility 500 kgNov. 57 => May 62P60 500 kgDec. 1959 => End of seriesRanch 1960

€148.80 TTC
(124,00 € HT)

Rear window seal - Peugeot 203 family

Rear window seal - Peugeot 203 family

Windscreen seal - Peugeot 203 family

Windscreen seal - Peugeot 203 family

Windscreen seal Ford Vedette 1949/52 - with central pillar

Welded windscreen seal - with central upright - for Vedette 1949 to 52. Photo no contractual

FRONT brake spring kit - Peugeot 404 - WITHOUT hydrovac

Brake spring kit for front wheels WITHOUT hydrovac Peugeot 404

Rear shock absorbers Peugeot 403 - except pickup

Rear shock absorbers Peugeot 403 - except pickupRecord brand, 100% conforms to the original assembly.Price of the pair.

Set of 4 relined rear brake shoes - Renault SG2

Set of 4 rear brake shoes relined in standard exchange for Renault SG2. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets that could damage the drums. Shipping upon receipt of worn parts.

€216.00 TTC
(180,00 € HT)

Poissy badge for Simca Versailles rear trunk

Rear trunk badge. Can be assembled according to year on Versailles (Ford and Simca), Trianon, Versailles, Régence, Beaulieu, Chambord, Présidence, Marly 1 and 2.Only the red badge is delivered

Poissy badge front cover Simca Versailles 6V

Front hood badge. Can be assembled according to year on Versailles (Ford and Simca), Trianon, Versailles, Régence, Beaulieu, Chambord, Présidence, Marly 1 and 2.Only the red badge is delivered

Valves x 4 - ADM ECH Ø 35x9.5x137.50 - 60 ° - Citroen C4 C6F

Valves x 4 - ADM ECH Ø 35x9.5x137.50 - 60 ° - Citroen C4 C6F

Rear brake hose - 315 mm - Simca 1000

Brake hose for Simca 1000 - L 315 mm Ø 3/8

Valves x 4 - ADM Ø 37x9x138 - Citroen P34 P36 10cv

Set of 4 ADM valves Ø 37x9x138 - Citroen P34 P36 10cv

Set of 4 Complete Pistons Ø 68.00 mm - Peugeot 202

Set of 4 Complete Pistons Ø 68.00 mm - Peugeot 202

Set of 4 relined front brake shoes for Peugeot D3 D4

Set of 4 front brake shoes width 57 mm relined in standard exchange for Peugeot D3 D3A D3B ... D4 D4A D4B etc. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets that could damage the drums. ...

€156.00 TTC
(130,00 € HT)

Set of 4 relined rear brake shoes for Peugeot D3 D4

Set of 4 rear brake shoes, 46 mm wide. relined in standard exchange for Peugeot D3 D3A D3B ... D4 D4A D4B etc. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets that could damage the drums. ...

€156.00 TTC
(130,00 € HT)

Master cylinder Panhard PL17 assembly Record 04/1962 at the end - SILICONE

Complete master cylinder for PL17 sedan, utility, Z1 from 04/1962 for a Record type assembly. Includes:For use 100% SILICONE. Otherwise choose the reference for the DOT fluid.- 22mm master cylinder- 3-way 7/16 connection- stop switch- 2 x copper ...

€147.72 TTC
(123,10 € HT)

Connecting rod bearings set - Peugeot 203 - Peugeot D3 D4 standard dimension

Set of bearings for 4 Peugeot D3 D4 connecting rodsStandard origin dimension. French made.

Waterproof ring nose bridge Renault R2087

Watertight ring (spinnaker) for bridge nose - size 50x80 to put back in the metal frame. Sold individually

Bearing 35 72 17 gearbox groove C2 for Peugeot 203

35x72x17 bearing with locking groove, special Peugeot 203 C2 gearbox

Divers

Produit divers

Câble frein AR - long 176 (jeu de 2) Peugeot 203

Jeu de 2 câble frein AR - Long 176 cm - Attention gaine longue (128 cm) véhicule type camionnette, plateau, ambulance  U8, C8

€91.20 TTC
(76,00 € HT)

Front hub kit - Ford Vedette - Vendome

Front wheel hub kit. Includes:- 1 internal conical bearing- 1 external conical bearingThe set is valid for one front wheel.

Shock absorber x 2 - rear Renault Prairie Colorale

Set of 2 RECORD shocks - AR mounting - compressed / stretched 335/535 mm 14mm eye

Renault Goelette Fregate bearing bearings dimension 0.50 - 55.50 mm

Set of 6 bearing shells dimension 0.50, 55.50 mm trunnion, Renault engine type 668 - 671 (Colorale, Goélette, R2087, Frégate, etc.)668 and 671 engine and Super Etendard 817 - 2.6 L

Set of 4 front brake shoes Mercedes 190 SL

Set of 4 front brake shoes in standard exchange. (Send us your set before shipping the new one)High performance friction, applied by industrial bonding, no more rivets damaging the drums. Micro blunt brake shoes.(Non contractual photo)

€180.00 TTC
(150,00 € HT)

Brake switch - STOP - Ford Anglia

Ford Anglia 105E and 106E brake switch. STOP light function

Maître cylindre asymétrique 38.1 mm Citroen U23

Maître cylindre piston d 38.1 mm (1'1/2). Fixation 3 trous asymétriques.  longeur 210 mm. Se monte sur Citroen U23 suivant version. Attention stock très réduit, nous consulter avant commande svp.

€306.00 TTC
(255,00 € HT)

Tailor-made front or rear brake hose

Tailor-made flexible front or rear fein. A simple call will allow us to determine your type of hose and its length.Same price as a standard model. Citroen HY, type H, HZ, HW.Non-contractual image.

Mechanism clutch Citroen U23

Clutch mechanism reconditioned, in standard exchange. Fitted on Citroen HY, type H, U23 and derivativesComplete disassembly, micro balling, surfacing and retaring of the pressure plate.(The shipment is made after receipt of the used mechanism, ...

€441.60 TTC
(368,00 € HT)

Master cylinder 25.4 mm - Ford Vedette 1949

Master cylinder, supplied complete with 25.4 mm bellows.Mounts on Ford Vedette 1949 (only)

€132.60 TTC
(110,50 € HT)

Citroën traction mechanism clutch

Clutch mechanism reconditioned, in standard exchange mounted on Citroën Traction engine, Type H, HY, U23 and derivatives. Complete disassembly, micro balling, surfacing and retaring of the pressure plate. p > (The sending is done after ...

€396.00 TTC
(330,00 € HT)

Ford Anglia front wheel bearing kit

Bearing kit for a front wheel.

Set of 4 Ford Anglia front brake shoes

Set of 4 front brake shoes in standard exchange. Ford Anglia 105 and 106 E. Shipping takes place after receipt of your worn brake shoes.

Front brake cylinder type G - Ford Anglia

Front wheel cylinder type G - Sold individually. (The photo allows you to recognize the model - a white letter is written on the part). You need one cylinder type G and one type D per front wheel.

Exhaust - Y tube - 2 in 1 stainless steel - Ford Vedette

Stainless steel exhaust - Y connecting the 2 cast iron manifolds to line. Ford Vedette 1949 to 1954.

€436.40 TTC
(363,67 € HT)

Windscreen seal Ford Vedette 1953/54

Welded windscreen seal - without central upright - for Vedette 1953 and 54. Non-contractual photo

Lampe 6V 21w culot baionnette 15

Brake master cylinder Ø 31.75 mm - Renault SAVIEM TP3

Brake master cylinder Ø 31.75 mm - External diamter  42 mm

€117.60 TTC
(98,00 € HT)

Simca Versailles wheel shaft stop ring

Ford Vedette 54 disc clutch 215 mm

Clutch disc reconditioned, in standard exchange for Ford Vedette. Complete disassembly, micro balling and painting. (The sending is done after receipt of the used mechanism, not destroyed)(Depending on the year, non-contractual photo)

€144.00 TTC
(120,00 € HT)

usinage sur mesure - moyeu D4

Interior and exterior window seal set for 4 doors - Peugeot 203

Seals to stick on the 4 doors

modification cylindre avec piston alu creux 14mm

Set of 4 relined rear brake shoes - FIAT 508 Ballila

Set of 4 relined brake shoes (AR) for Fiat ballila in standard exchange. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets which can damage the drums.Shipping upon receipt of worn parts.

€102.00 TTC
(85,00 € HT)

Lower ball joint - Citroen HY - Traction 15 hp

Lower ball joint - CItroen HY - Traction 15 hp

Cylindre de frein avant SAVIEM SG3

Regulateur électronique pour dynamo 6V positif à la masse - Ford Vedette - Simca Versailles

€208.00 TTC
(208,00 € HT)

Jeu joints bas de marche de porte - Peugeot 203 cabriolet

Jeu joints pour montant de porte et malle - Peugeot 203 cabriolet

Bague cuivre pour mâchoire Citroen

Cylindre frein 25.4 mm - entrée 11mm cone entrant (7/16e) - SAMBRON transporteur à benne

Cylindre frein  25.4 mm - entrée 11mm (7/16e) cône entrant -SAMBRON transporteur à benne Pour permettre le raccordement sur une canalisation avec un embout conique femelle, ajouter pour chaque cylindre : 1 x adaptateur avec cône sortant: 1 x ...

copy of 3-way 3/8 24 f connector

3-way 3/8 connection 24 threads - generally at the outlet of the master cylinder

Rear quarter seals x2 Simca Versailles Ariane

Set of 2 rear quarter seals for Simca Ariane, Versailles, Trianon.Quality reproduction conforming to the original

Rear brake spring set Ford Anglia 105E 1959-67 - 1 side

Rear brake spring set Ford Anglia 105E 1959-67 - 1 side

Pinion oil pump mounted on axis - Ford Vedette

Replacement gear for oil pump - V8 Ford Vedette.Delivered riveted with new axle. (Advantageously replaces the celoron one that has become fragile over time)Attention for the V8 Simca 13 hp 2350 cm3, choose the reference "Simca oil pump pinion" on ...

€270.20 TTC
(270,20 € HT)

Wiper sole kit - Ford Vedette 1954

Kit semelle pour essuie glace Ford Vedette 1954 - Fabrication française soignée - Exclusivité techni-Tacot Comprend : 2 x semelles essuie glace

€11.90 TTC
(11,90 € HT)

Ignition kit contact breakers + capacitor Lucas - Ford Anglia

Lucas contact breaker + capacitor ignition kit - Ford Anglia 105 106 E.

Brake master cylinder Ø 31.75 mm - Peugeot 202 UH

Master cylinder complete with bellows: D 1'1 / 4 or 31.75 mm - inlet 3/4 - 16 f outlet 1/2 - 20fEntry in 18 mm. If the old model was 22mm, order the adapter here.Peugeot 202 UH

€144.00 TTC
(120,00 € HT)