Ducellier 618509 carbon brushes for Ford Vedette starter motor
Ducellier 618509 carbon brushes for Ford Vedette starter motor
(32,50 € HT)
jeu de segments pour V8 - 67 mm -2.38x2.38x3.97x3.97 - Ford Vedette
(172,00 € HT)
equilibreur tete bielle renault 671
(0,00 € HT)
equilibreur tete bielle citroen ds
(7,00 € HT)
équilibreur pied de bielle renault 671
(6,00 € HT)
equilibreur pied bielle citroen ds
(20,00 € HT)
équerre reglage tension dynamo
(0,00 € HT)
Best Sellers
Ignition capacitor 6, 12 and 24V
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,50 € HT)
Front brake cylinder kit 34.9 mm - 1 3/8 Renault Prairie R2087 Goelette
Repair kit for AV cylinder. d 34.93 mm
(16,00 € HT)
Rear brake cylinder 28.57 mm - 1 1/8 Renault Colorale, Prairie, R2087, Goelette
" Rear wheel cylinder. Diam: 1" "1/8 or 28.6 mm. Liquid inlet diameter = 11.4 mm (1/2 20 f / p) Renault Colorale, Prairie, R2087, Goélette, 1000 kg, 1400 Kg and derivatives . "
(87,00 € HT)

Ignition - 4 x Spark plugs for Renault Fregate colorale goélette R2087
Set of 4 NGK spark plugs with std base (14 mm), Renault Fregate, Colorale, Prairie engine (side engine 603 and tumbled 668 or 671), R2087, Goélette, Galion, SG2 gasoline (engine 671 or 817) etc. Compatible with SP95 and SP98 fuels
(20,00 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,50 € HT)
Best sellers There are 1760 products.
Complete set of engine gaskets - Simca 8 - 1200
Complete set of engine gaskets - Simca 8 - 1200Attention non-contractual picture
(228,90 € HT)
Plate equipped for front left or right turn signal - Ford Vedette
Plate fitted for front left or right turn signal - Ford VedetteSupplied with the cork gasket, sockets with wires.Delivered without lamp.
(128,00 € HT)
Front axle repair kit all models - Peugeot 404 after 63
Front axle repair kit for all models - Peugeot 404 after 63The set includes all parts visible in the photo
(49,58 € HT)
Engine gaskets kit - Simca 9 - 1221 cm3 engine
Gasket set with cylinder head gasket for Aronde Simca 9 - 1221 cm3 engineIncludes engine gaskets including cylinder head gasket, and oil seal ring for crankshaftNon contractual photo. Not suitable for Flash or Rush engines.
(204,75 € HT)
Heater hose - the set - Simca Aronde 1300 Ø 14 mm
Heater hose - the set - Simca Aronde 1300 Ø 14 mm. Heating in the engine compartment.
(40,00 € HT)
Brake line - from 150 to 200 cm
Brake line re-manufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original end pieces)Shipping after receiving your model.
(57,70 € HT)
Ignition - 123 tune 12 v programmable electronic ignition for Renault Prairie Fregate
Electronic ignition for 12V vehicle - 123 Programmable Ignition (123 Tune) for 4 cylinder engine.Installs in place of your original model. Everything is integrated in the body of the igniter (no remote box).Supplied with adjustment and assembly ...
(445,00 € HT)
Segment set Ø 80 mm Peugeot 403 - 2cx2x4.5x4.5
Segment set Ø 80 mm Peugeot 403 - 2cx2x4.5x4.5
(110,00 € HT)
Clutch mechanism type 2 - fits to clutch disq springless - Citroen HY
Clutch mechanism reconditioned, in standard exchange mounted on HY engine (aluminum cylinder head).Complete disassembly, micro balling, surfacing and retaring of the pressure plate.(The sending is done after receipt of the used mechanism, not ...
(315,00 € HT)

Front brake hose - 470mm - Peugeot D3
Front brake hose Peugeot D3 D3A D3B etc. Length 470 mm. tip Ø 17 mm approximately
(25,00 € HT)
Black gear lever knob for Simca Chambord Vedette dashboard
Gear shift knob, in black lacquered resin Simca Chambord, with insert for thread, according to the origin
(40,60 € HT)
Rear brake hose 650mm - Renault Galion
Rear brake hose - 650 mm long - 2 threaded ends d 17 mm.
(25,00 € HT)
Anglia 110mm oil filter for Ford Anglia
Oil filter cartridge - H = 110 mm. Please note there is also a shorter model: 80mm. Take the time to measure your model before ordering.(Non contractual photo)
(15,00 € HT)
Set of 4 relined rear brake shoes Simca Ariane
Set of 4 relined brake shoes (Ar) for Simca Ariane 4 or Ariane 8 - in standard exchange. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets which can damage the drums.Shipping upon receipt of ...
(104,45 € HT)

Set of 4 rear brake shoes 403 UtilityU8 Peugeot
Set of 4 rear brake shoes - standard exchange. (Send us your set before shipping the new one). High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes.
(108,90 € HT)

Simca 5 rear brake shoe set 4
Set of 4 rear brake shoes in standard exchange. (Send us your game before shipping the new one)High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished jaws.
(74,25 € HT)

Set of 4 rear brake shoes Simca 6
Set of 4 rear brake shoes relined, in standard exchange for Simca 6 (non contractual photo). High performance friction, excellent grip, applied by industrial bonding, elimination of rivets which damage the drums. Pickled and varnished brake ...
(79,80 € HT)

Bearing (4x4 version) front inner hub - Renault Prairie R2087 Goelette
Front hub bearing (internal) for Renault 4x4 Colorale, R2087, Goélette etc.1 per side of the wheel (i.e. 2 per vehicle)Be sure to check the dimensions BEFORE orderingOverall dimensions: 50.00 x 90.00 x 22.23 / 15.88
(90,00 € HT)
Clutch mechanism Fregate
Clutch mechanism reconditioned, in standard exchange. Mounted on Renault Frégate, Domaine, Manoir and derivativesComplete disassembly, micro balling, surfacing and retaring of the pressure plate.(The shipment is made after receipt of the used ...
(295,00 € HT)

Prairie Goélette mechanism clutch
" Clutch mechanism reconditioned, in standard exchange. Fitted on Renault Colorale, Prairie, Goélette, Galion, R2087 and derivatives Complete disassembly, micro balling, surfacing and retaring of the pressure plate. (The sending is done after ...
(367,00 € HT)

Simca Versailles Chambord oil pump pinion
Replacement pinion for oil pump - V8 Simca (Versaille, Chambord, etc.). Supplied with 4 rivets. (Advantageously replaces the celoron one which has become fragile over time). Attention for Ford Vedette 12hp 2150 cm3 V8s, choose the reference " ...
(187,00 € HT)

Ignition HT wares - 5 wires Ford Anglia
Ignition wires - 5 wires. Mounts with horizontal outlet head.
(45,00 € HT)
bague etanche pour pont U8 37x61- peugeot 203 utilitaire
(18,00 € HT)
Rear brake hose 140 mm Citroen Traction
Rear brake hose 140 mm long. Traction 7.11 and 15hp.
(20,00 € HT)
copy of Flexible front brake hose 380 mm - Citroen Traction
" Flexible front brake hose length 380 mm. (Attention depending on assembly exists in length 470 mm (available on the Shop) Traction 7.11 and 15 hp - U23 and HY "
(25,00 € HT)
Jeu de 10 anneaux élastiques aec crochet pour siège - Citroen HY
(13,00 € HT)
Optical assembly + rim + similar casing Marchal - Lighthouse
Set of 1 Marchal similar headlight including:1 x parabolic optic1 x chrome hoop1 x black lacquered casing
(215,00 € HT)
frais nettoyage + ré-emballage suite produit monté ou sachet ouvert
(6,00 € HT)
BENDIX launcher for starter - Citroen Traction
BENDIX launcher for starter - Citroen Traction
(97,00 € HT)
Pair of front brake cylinders 28.5mm - Panhard 24 - 07/1964 to the endnch nov 57 a end
2 x front wheel cylinder left and right - d 28.57 mm. 3/8 entry Left side mounting. Length 72 mm - inside liquid passage = 8.5 mm. Assembly:
(140,00 € HT)

Front brake cylinder 28.5 mm - citroen U23
Front brake cylinder d 28.57 mm (1'1 / 8). French made
(116,00 € HT)

Red indicator light 12 v - Ø 12 mm - alternator charge indicator
Red indicator light 12 v - Drilling at 12 mm - alternator charge indicator
(10,50 € HT)
Screw-in oil filter - D 95 x 136 mm - Renault 817 SG2
Oil filter Ø 95 x L 136 - Renault 817 SG2 Dimensions: A: 96 mm - outer diameter. B: 63 mm - int. C: 72 mm - int. D: 3/4"-16 UNF - Connection thread E: 136 mm - height
(30,00 € HT)
Bielle neuve pour montage avec coussinet - Citroen Traction 11cv et 15 cv
(115,00 € HT)
Trunk seal - Peugeot 203 sedan 4p
Trunk or trunk seal - Peugeot 203 sedan 4p
(24,08 € HT)
Transparent flashing light - Citroen HY
Transparent light - without lamp - Citroën HY
(22,50 € HT)
Mechanism clutch PKSC - Simca Chambord Versailles
Clutch mechanism reconditioned, in standard exchange mounted on Aquilon Simca V8 engineComplete disassembly, micro balling, surfacing and retaring of the pressure plate.(The sending is done after receipt of the used mechanism, not ...
(295,00 € HT)

Front lights kit 2 x soles - Ford Vedette - 1949 to1952
Sole kit for Ford Vedette - 1949 to 1952. French manufacture by Techni-Tacot.Including:2 x soles for front light plate.
(35,70 € HT)
Gray needle button for Ford Vedette 53 and 54 dashboard
Resin button with Ford Vedette gray lacquered needle, with thread insert, as original.Sold individually. Please note this model with anti-rotation needle screw is intended for Fog and Heating controls (1953 to 54)
(20,92 € HT)
set of 2 diabolos - steering silent block - Simca 9 - Aronde - P60
set of 2 diabolos - steering silent block - Simca 9 - Aronde - P60Mounted at the ends of the long steering rod under the radiator.
(33,33 € HT)
Boot handle sole kit - Ford Vedette 1949 -53 - sedan / coupe / cabriolet
Sole for Ford Vedette sedan, coupe, convertible. French manufacture by Techni-Tacot.Including:1 x sole for the trunk handle.
(26,68 € HT)
bearing stops - Ford 1949 to 52
Set of 4 retainers for V8 Ford Vedette 1949 - 52 (Strainer with spring and support on central bearing)
(20,70 € HT)
Flector transmission - Simca 9 dovetail P60 all models
Flector transmission - Simca 9 dovetail P60 all models
(90,00 € HT)
Master cylinder - Beginning to Nov 57 - Simca Utility 500 kg
Master cylinder, supplied complete with 25.4 mm bellows.Master cylinder - Beginning to Nov 57 - Simca Aronde Utility 500 kg
(110,50 € HT)

Master cylinder Panhard Dyna Record mount - 25.4 mm - SILICONE
Complete master cylinder for Dyna - Record type mounting. Includes:For liquid use 100% SILICONE. Otherwise choose the reference for the traditional DOT.- master cylinder 25.4 mm- 3-way 7/16 connection- stop switch- 2 x copper gasket
(113,90 € HT)

Heater hose - the game - Simca 9 - Aronde 56 a 59 - Deluxe
Heater hose - the set - Simca 9 - Aronde 56 to 59 - Deluxe 16 mm
(43,00 € HT)
Connecting rod bearings (set) 47.50 mm dimension 0.50 - Citroen Traction 11D - HY -U23
Set of 47.50 mm connecting rod bearings - dimension 0.50 mm - Citroen Traction 11D - HY - U23Mounts on engines equipped with bearing connecting rods.
(85,00 € HT)
Valves x 4 - ADM Ø 37x8.5x116.4 - Peugeot 203 - 403
Set of 4 ADM valves Ø 37x8.5x116.4 - Peugeot 203 - 403
(116,67 € HT)
Clutch mechanism Simca 9 Aronde P60
Clutch mechanism reconditioned, in standard exchange.Complete disassembly, micro balling, surfacing and retaring of the pressure plate.(The sending is done after receipt of the used mechanism, not destroyed - Depending on the year, ...
(340,00 € HT)

Sealing ring gearbox - input - Renault Colorale Goelette
Sealed ring (spinnaker) for gearbox inlet. (check presence according to model)
(14,07 € HT)
Bearing (4x4 version) front outer hub - Renault Prairie R2087 Goelette
Front hub bearing (external) for Renault 4x4 Colorale, R2087, Goélette etc.1 per side of the wheel (i.e. 2 per vehicle)Be sure to check the dimensions BEFORE orderingOverall dimensions: 42.86 x 82.55 x 19.84 / 15.08
(153,00 € HT)
bearing 35 72 17 groove gearbox simca v8
Bearing 35x72x17 with locking groove, special Simca Versailles Chambord gearbox and derivatives
(45,00 € HT)
Citroen traction disc clutch
Clutch disc reconditioned, in standard exchange Traction, type H, HY, U23 and derivatives. Complete disassembly, micro balling and painting. (The sending is done after receipt of the used mechanism, not destroyed)(Depending on the year, ...
(115,00 € HT)

Rosengart crankshaft rear bearing
Roller bearing, rear crankshaft bearing assembly (flywheel side) for LR2, LR4, LR4N2 engines and derivatives.
(98,00 € HT)
jeu de 3 plots isolants pour cerclo volant Ford Vedette
(8,25 € HT)
Windscreen wiper - arms x 2 - 13 mm axle - left angled - 300 mm
(35,00 € HT)
Oil pressure contact mano - 12x150 - Simca Versailles Chambord
oil pressure switch M12x150
(10,50 € HT)
copy of Oil pressure contact mano - Ford Vedette 1949 - 54
oil pressure switch for Ford Vedette engine from 1949 to 1954 - Thread M 10x100
(10,50 € HT)
Adapter connection 7/16 male - 1/2 female
Adaptateur freinage mâle 7/16 (envion 11mm)femelle 11/16 pour recevoir gros flexible (17mm mâle
(15,00 € HT)
Piston liners set - PEUGEOT 205 Rallye - AX Sport - 1294cc
Piston liner set - PEUGEOT 205 Rallye - AX Sport Ø 75.00Engine: TU2 4 -1294cc
(342,20 € HT)
Flashing unit or electronic warning 12V - 92W - 4 studs
For all types of lamps and up to 92 W in total. Pinout 3 terminals. For 12V negative to ground. Replaces 12v 3 pin mechanical units. Can work as a flashing unit as well as a warning unit. Supplied with fixing bracket. Perfectly regular flashing ...
(30,00 € HT)
Manometer Tachometer - 2 - 4 - 6 - 8 cyl - electric 12V - black background - for negative to mass
Mano "OS" Tachometer 0 to 5000 rpm for 4-cylinder petrol engine. Connects to the "break" terminal on the ignition coil. 52 mm recess on the pressure gauge side. delivered with lighting. for negative to ground
(58,29 € HT)
Kit of 3 camshaft rings + installation tool - Renault fregate prairie Goelette engine 668 and 671
Kit 3 camshaft bushes and installation tool- Renault Frégate Prairie Goelette engine 668 and 671 standard dimension
(336,00 € HT)
Segment clearance Ø 72 mm - 2.5 x 2.5 x 3 x 4 - Simca 9 - Aronde
Set of 16 segments for 4 pistons dimension Ø 72 mm - Simca 9 or Aronde enginecomposition per plunger:4 x fire segment 2.5 mm4 x compression in 2.5 mm4 x compression in 3 mm4 x scraper in 4 mmPossibility to order in 85 mm (call us) - ...
(103,00 € HT)
Flexible de embrayage 300 mm SUMB Marmon
Brake hose Length 300 mm. Entry 7/16 e 16 f / p for SUMB Marmon. Please check the correspondence with your model before ordering.Outside diam: 15.6 mmInternal diam: 10mmFor other models, please call us
(36,00 € HT)
Reinforced collar for exhaust - Ø 64-67 mm
Reinforced collar for exhaust - Ø 64-67 mmRobust French manufacturing
(6,50 € HT)
Heating valve with lever Ø 11,8 mm
Heating valve with lever Ø 11,8 mm. Synthetic material (no corrosion problem). Length connection end to other: 84 mm
(20,83 € HT)
Ignition kit Lucas igniter VERTICAL outputs - Ford Anglia
Ignition kit for Lucas 25D igniter with horizontal outlet head. Fitted on Ford Anglia 105 106 E.Includes: capacitor, ignition head, finger, breakers (platinum-plated screw)
(43,80 € HT)
Brake hose 367 mm - front or rear - Simca 1300
Front or rear brake hose length 367 mm.Male ext 9mm - female int Ø 8.3 mmMounts on:- Simca 1300 front or rear- Simca 1500 rear onlyCheck with your model before ordering.
(22,00 € HT)
Simca Versailles-Ariane trunk seal
Trunk seal for Simca Versailles, Ariane, Chambord etc.
(30,00 € HT)
Set of 2 flexible soles for door or tailgate handle - Renault Colorale Prairie
Set of 2 flexible soles for door and trunk handle (exterior)
(14,00 € HT)
Rear brake cylinder 25.4mm - 3/8 - Peugeot 404 - petrol berline 10/65 to 10/67
Rear brake cylinder - Ø 25.4 mm - Liquid inlet with outgoing cone - Peugeot 404 - petrol sedan 10/65 to 10/67Liquid inlet 3/8 - measurement on the male connection = 9.5 mm
(42,50 € HT)

Brake master cylinder Ø 31.75 mm - Peugeot 404 Thermostable
Brake master cylinder Ø 31.75 mm - Peugeot 404 Thermostable
(98,00 € HT)

Exhaust collar flange Ø 45mm
Flange for exhaust connection (clamp with caliper) Ø 45 mm
(7,50 € HT)
High engine gaskets kit - Simca 9 - 1221 cm3 engine
TOP ENGINE gaskets kit with cylinder head gasket for Aronde Simca 9 - 1221 cm3 engine.Non contractual photo. Not suitable for FLash or RUSH engines.
(104,47 € HT)
Master cylinder Panhard Dyna Record mount - 25.4 mm - DOT
Complete master cylinder for Dyna - Record type mounting. Includes:For DOT liquid use. Otherwise choose the reference for the 100% SILICONE liquid- master cylinder 25.4 mm- 3-way 7/16 connection- stop switch- 2 x copper gasket
(113,90 € HT)

Aluminum timing gear - Ford Vedette
Aluminum distribution sprocket - Ford Vedette 1949 to 54 and Comète 12cv - Advantageously replaces the Celoron one. Silent teeth - Timing mark engraved on the external face as at the origin. Neat French manufacturing.
(333,00 € HT)
Front and rear brake hose 470 mm - Simca 9 - Debut a 01/53
Front and rear brake hose - 470 mm - Made in France - Simca 9 - 1200 until January 1953
(25,00 € HT)
50 mm galvanized flange or collar exhaust - Simca Versailles Chambord
Flange for exhaust connection (clamp with caliper)
(7,50 € HT)
Piston liners kit Ø55.80 Renault R4 R5 - mot 839.01 and 06 - 782 CM3
Piston liners kit Ø55.80 - RENAULT R4 Type R1126-2109-2392 - R5 Type R1220Engine 839.01 and 06 - 782 CM3 - Piston height 61.8 mm - piston pin Ø 16 mmThe base gaskets are supplied in the engine gaskets kit only.Connecting rod or crankshaft bearing ...
(271,00 € HT)
Segment set Simca 5 - 52.50 mm 2x2x2x3
Set of 16 segments (4 per piston) - Cylinder bore 52.50 mmComposition:12 waterproof segments, 2 mm high4 scraper segments 3mm high. Non contractual photo.Other dimensions available, contact us to define the height of each segment.
(132,20 € HT)
Liner Ø 68 mm semi finished int 67.50 for Citroen Simca 8
Liner Ø 68 mm delivered semi finished in Ø 67.50 - length 188 mm - Ø 71 - collar Ø 72 - High collar 5 mm - Citroen 8 cv -Rosalie Citroën P35 - Simca 8 - sold individually
(62,50 € HT)
Segment set 2 x 2 x 4.5 - STD 88 mm Renault R2087
Set of 12 segments for 4 pistons dimension 88 mm - 671 Renault petrol engine.composition per piston:2 x compression in 2 mm1 x scraper in 4.5 mmNon contractual photo
(115,85 € HT)
Rear brake cylinder - Ø19 mm - Simca 1000
Rear wheel cylinder L or R Ø 19 mm
(56,00 € HT)

Ford Vedette oil pump pinion
Replacement gear for oil pump - V8 Ford Vedette. Supplied with 4 rivets. (Advantageously replaces the celoron one that has become fragile over time)Attention for the V8 Simca 13 hp 2350 cm3, choose the reference "Simca oil pump pinion" on our shop.
(187,00 € HT)

Fuel pump - Ford membrane kitAnglia 105 106 123 307 E
Repair kit for gasoline pump with glass dome. Mounts on FORD Anglia 105E / 106E / 123E / 307E
(55,60 € HT)
Set of 8 pistons 66.04 Simca Versailles Chambord
Set of 8 pistons original dimension (66.04 mm) complete (with segments, pins and clips). Aluminum body, quality segmentation with spring-loaded oil scrapers. Flat heads. Mounts on Simca Trianon, Versailles, Régence, Beaulieu, Chambord, ...
(1 194,00 € HT)
Shock absorber x2 - front Renault Prairie Colorale
Set of 2 RECORD shocks - front mounting - compressed / stretched 305 / 480mm 14mm eye
(239,30 € HT)
Rod bearings Renault Goelette Fregate dimension 0.50 - 54.50 mm
Set of 8 connecting rod bearings (with lubricating hole for the connecting rod) dimension 0.25 crankpin d 44.50 mm - Renault, Colorale, Goélette, R2087, Frégate, SG2, etc).Mounts on engine 668 - 11cv - 2L, 671 - 12cv - 2.2 L and Super Etendard ...
(450,00 € HT)
Renault Goelette Fregate bearings, dimension 0.25 - 55.75 mm
Set of 6 bearing shells, dimension 0.25, 55.75 mm trunnion, Renault type 668 - 671 engine (Colorale, Goélette, R2087, Frégate, etc.)668 and 671 engine and Super Etendard 817 - 2.6 L
(388,50 € HT)
Panhard PL 17 rear brake hose 236 mm
Rear brake hose PL 17 from 1960 to end of series - long 236 mm
(27,00 € HT)
Drive shaft spacers - Ford Vedette
Drive shaft spider. 2 per tree - Sold individually.
(50,00 € HT)
Front cylinder 31.7 mm - HOTCHKISS ARTOIS 864
" Front brake cylinder. D 1" "1/4 (31.75 mm). Sold individually (1 cylinder per wheel). Entry 7/16 - provide 1 seal 025153 + 0225154 "
(44,50 € HT)

2-pin push button - 60 Amp - metal body - starter control
(8,00 € HT)
Cylinder - front or rear copper seals kit for one wheel - VLR Delahaye
Set of 2 seals for hollow screw and banjo (for 1 cylinder)
(3,40 € HT)

Rear brake cylinder kit 44.4 mm - Citroen U23
For Citroen U23 and other heavy goods vehicles. Repair kit for 1 rear wheel cylinder 44.5 mmn includes:2 steel pistons, 2 cups, 2 dust covers, 1 springKit for one cylinder.
(63,00 € HT)

Adapter fitting 7/16 Male - 7/16 female outgoing cone
Adapter fitting 7/16 Male - 7/16 female outgoing cone
(16,30 € HT)
Cylindre frein arrière 22 mm - Panhard Dyna Z - montage RECORD
Rear L and R brake cylinder Panhard Dyna - Diam 22mm - RECORD.Sold individually (1 cylinder per wheel)