filtre huile anglia 80 mm Ford Anglia

Ford Vedette stabilizer bar support

Mounting bracket for stabilizer bar. 2 per vehicle - Sold individually.

Grease cover on lower wishbone chassis side - Ford Vedette

Silent block fitted to the lower wishbone axes - Reference Ford 3194 - 4 per vehicle - Sold individually - (18112)

Brake reservoir - male thread + electrical contact

Brake fluid reservoir, translucent plastic. With cap, and electrical contact for low fluid level

Thermostat - Simca Aronde P60

Thermostat for cooling circuit - Simca Aronde P60 - engin Flash or Rush

Set of 78mm flat piston liners - Citroen HY with Traction engine - Before 1963

Set of 4 liners + 4 complete flat head pistons (segments, clips, pins) - Quality segments.Bore Ø 78 mm - For Citrien HY engine before 1963 (Traction type engine with cast iron cylinder head)total height of jacket 185.50 mm top / base height ...

bush side axle fits to rear axle half shaft 35 mm - Peugeot 203

Sealing ring for 1/2 wheel shaft. Replaces the bakelite rings located in the rear axle trumpets on Peugeot 203.Used to stop the oil from the axle towards the rear hubs. (2 per car) Sold individually  

Citroën HY rear hub oil seal - external

Sealing ring (spinnaker) for rear hub Citroen HY, type H, HW. Sold individually External (the smaller one)

Ford Vedette gearbox inlet seal ring

Sealing ring (oil seal) placed at the Ford Vedette gearbox outlet.35 x 51

Rear brake cylinder 19 mm - Renault 4CV - 02/53 to 01/1956

Rear brake cylinder 19 mm - Renault 4CV - 02/53 to 01/1956

€63.60 TTC
(53,00 € HT)

Brake hose - FF - 493 mm rear Peugeot 403

Front brake hose length 490 mm - Two female-female endsOutside diam: 15.6 mmInternal diam: 10mm

Wooden steps - pair - Renault Goelette R2087 Galion voltigeur

Set of 2 wooden steps - (left + right) - Quality manufacturing by carpenter - doweling and gluing - multi-layer varnishing - Ash wood- Renault Goelette 2087 Aerobatic galleon

Brake hose 493 mm AR - Simca 9 and Aronde - 01/53 to 02/56

Rear brake hose 493 mm - Simca 9 - 1200 cm3 and Aronde - 01/153 to 02/1956

Water pump for pulley with central nut + pin - Simca Aronde P60 Ariane

Water pump for pulley with central nut + pin - Simca Aronde P60 Ariane

Rear brake hose 420 mm - Simca 5

Rear brake hose - 420 mm long - 2 Ø17 mm threaded ends.

Segments set Ø 72 mm Citroen Traction U23 HY 2x2.5x5 - 4cyl

Piston ring set Ø 72 mm Citroen Traction 2 x 2.5 x 5 - 4 cyl

Rear brake hose 470 mm - Simca 6

Rear brake hose 470 mm - Made in France - Simca 6

piston ring set Ø 78 mm Citroen Traction U23 HY 2x2.5x5 - 4cyl

Segment set Ø 78 mm Citroen Traction 2x2.5x5 - 4cyl

Citroen HY type H brake limiter distributor

Citroen HY type H brake limiter distributor

Rear wheel brake hose - 250 mm Panhard Dyna

Rear wheel brake hose - 250 mm Panhard Dyna - 17 mm male end. Made in France

Heating valve controlled by cable Ø 16 mm

Heating valve controlled by cable Ø 16 mm. Synthetic material (no corrosion problem)Length connection end to other: 91.5 mm

Valves x 4 - ADM Ø 37x9x101.6 - Citroen Traction 11 perfo - HY Perfo engine - U23 flat wings

Set of 4 ADM valves Ø 37x9x101.6 - Citroen Traction 11 perfo - HY from 1955 to 63 Perfo engine - U23 flat wings

Ignition - SEV Peugeot D3 D4 distributor head

SEV distributor head for Peugeot D3 D4

Ignition - protected harness Peugeot D3 D4 petrol

Ignition harness for Peugeot D3 D4 petrol engine.Current quality manufacture in red silicone.

Rear brake hose 650 mm Renault Galion

Rear brake hose. Length 650 mm. External thread (metal color on the photo) = 10.9 mm - Internal seam (yellow color on the photo) = 11.3 mm.Remember to replace the copper seal on the male thread sideFor other models, please call us

Ford Vedette 31.7mm front cylinder required

Front wheel cylinder repair kit, with pistons and spring. (For one wheel)Diam 31.75 mm

€27.00 TTC
(22,50 € HT)

Set of 4 relined rear brake shoes Simca 8 brake

Set of 4 relined brake shoes (AR) for Simca 8 in standard exchange. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets which can damage the drums.Shipping upon receipt of worn parts.

€112.00 TTC
(93,33 € HT)

Set of 4 front brake shoes 403 Utility U8 - 50mm - Peugeot

Set of 4 front brake shoes - width 52 mm - standard exchange. (Send us your set before shipping the new one). High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes.

€141.60 TTC
(118,00 € HT)

Lower hose INDENOR Citroën HY

Lower hose INDENOR Citroën HY

Front brake cylinder 28.5mm- Simca Aronde sept 51 to jan 53

Front wheel cylinder. Diam 28.5mm. Assembly:- Simca 9 1200 - Aronde - January 51 to January 53

€61.20 TTC
(51,00 € HT)

Set of 8 pistons 67.00 Simca Versailles Chambord

Set of 8 pistons dimension 67.00 mm, complete (with segments, pins and clips). Aluminum body, quality segmentation with spring-loaded oil scrapers. Flat heads. Mounts on Simca Trianon, Versailles, Régence, Beaulieu, Chambord, Présidence, Marly I ...

Charger and maintenance 6v / 12v Accumate

AccuMate is designed to automatically charge and monitor batteries without the danger of overcharging them, regardless of plug-in time. AccuMate is available for all 6V and 12V lead acid batteries, making it a perfect accessory for owners of ...

Soundproofing with adhesive 1m2

Sound insulation in heavy plates. Allows you to lower the sound level. Self-adhesive (film to be removed before installation). Plate 200 x 500 mm. The package contains 10 plates, i.e. 1 m2 in total

Peugeot accelerator cable403 (kit)

Kit for repairing the accelerator cable Peugeot 403 all models.

Dyna Z rear brake hose 412 mm

Rear brake hose Dyna Z Panhard - from 1954 to late - length 412 mm

Head gasket 3 mm solid copper Ford Vedette

Solid copper cylinder head gasket. Thickness 3mm. Used with very planed cylinder head.Tightening at 5m.kg. Pose impérative avec le produit d'étanchéité en pâte pour les joint de culasse 2 ou 3 mm disponible ici.Cylinder head thickness measured ...

Ford Vedette disc clutch

Clutch disc reconditioned, in standard exchange for Ford Vedette. Complete disassembly, micro balling and painting. (The sending is done after receipt of the used mechanism, not destroyed)(Depending on the year, non-contractual photo)

€144.00 TTC
(120,00 € HT)

Exhaust - tube + stainless steel final stock (n ° 4) - Simca Chambord

" Outlet tube with bracket (passage of the bridge) to be connected to the outlet of the silencer. All stainless steel. "

Kit 2 x Ford Vedette pivots

" Ford Vedette front pivot repair kit for all models, Bee, Comet, Monte Carlo, Vendôme. Includes 2 pins and 4 bronze bushings. (for 2 wheels). The 2 axes are in treated steel for a much greater hardness than ordinary commercial products. ...

Front brake cylinder D Ø 28.5 mm - with Simca Chambord bleeder

" Front right wheel brake cylinder, equipped with a bleeder - Simca Beaulieu, Chambord, Présidence, Marly 2, Ariane 4 and Ariane 8 - Simca 1300 until September 1965 Diameter 28.57 mm "

€67.20 TTC
(56,00 € HT)

Copper gasket 15.3 * 21

Copper gasket 20x11.50 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

Brake line - Ø 4.5 mm - 0 to 50 cm

Brake line remanufactured on demand only in copper diameter 4.5 mm.

Adapter connection 7/16 male - 3/8 female

Adaptateur freinage  mâle 7/16 (envion 11mm) femelle 3/8

exhaust valve 35 mm 4 notches - Renault Fregate Prairie Goelette

Exhaust valve 35 x 9 long 116 mm for Renault Fregate engine and derivatives (used part)

Peugeot 403 truck 28.5mm rear cylinder required

" Front wheel cylinder repair kit, with pistons and spring. (For one wheel) Piston diameter = 28.57 mm "

€24.30 TTC
(20,25 € HT)

Fuel pump - Ford Vedette

Fuel pump - Ford Vedette

Segment set Ø 66.04 mm Simca Chambord 2.38x2.38x5 - 8cyl

Segment set Ø 66.04 mm Simca 2.38x2.38x5 - 8cyl

Exhaust manifold paint - 250 ml

€48.00 TTC
(40,00 € HT)

Rear hub oil seal - Fiat Balilla 580

Sealing ring (spi seal) placed at the output of the rear half-shaft40x62

Set of 4 door seals for Peugeot 404 saloon

Set of 4 door seals for Peugeot 404 saloon

Aluminum water departure on engine block - Ford star

Aluminum water supply on engine block to radiator - Ford Vedette 1949 to 1954 and Comète 13 hpCareful French manufacturing - machined and welded aluminum.Two parts are needed per engine. Sold individually.

€91.80 TTC
(91,80 € HT)

4 intake valves 42 x 107.7 x 9 mm - Citroen HY engine ID19

4 intake valves 42 x 107.7 x 9 mm - Citroen HY from 1963 and Citroen DS and ID until 1965

Outdoor window washer x 4 Simca Versailles-Ariane

Set of 4 exterior window wipers for Simca Versailles-Ariane.Adaptable model. Reuse the metal strips to form the rounded parts.

set of 2 Rear window gaskets - Peugeot D3 D4

Set of 2 windscreen gaskets for Peugeot D3 or D4.

connecting rod bearings standard engine rating 839 - renault 4cv Dauphine 4L - 747 - 782 and 845 cm3

Renault 4cv Dauphine 4L - 747 - 782 and 845 cm3

Water pump axis 15 with non-declutchable pulley - Peugeot 203/403

Water pump axis 15 with non-declutchable pulley - Peugeot 203/403

Copper cylinder head gasket - Citroen trefle 5HP

Copper cylinder head gasket - Citroen trefle

Shock absorber oil canister - Renault Goélette and derivatives

Oil canister for Renault schooner shock absorber (1L)

Cable kit with 12V starter relay - Citroen HY

Bearing set - Peugeot 203 - 403 STD side

Set of 3 bearings for Peugeot 203 and 403.Original standard dimension

bearing stops - Ford 1953 to 54

Set of 4 retainers for V8 Ford Vedette 1949 - 52 (Strainer with spring and support on central bearing)

Bronze ring - bush 15x19x30 for Citroen Traction HY U23 water pump

Bronze ring - bush 15x19x30 for Citroen Traction HY U23 water pump

Upper hose Simca 9 - Dovetail - before the A90

Upper hose Simca 9 - Aronde - before the A90 - From the beginning until current 1954

Steering gear on chassis - Simca Versailles - Chambord - Ariane

Steering gear on chassis - Simca Versailles - Chambord - Ariane

Clutch disc 180mm - Simca Ariane 4 - Standard exchange

Clutch disc reconditioned, in standard exchange. Complete disassembly, micro balling and painting. (The sending is done after receipt of the used mechanism, not destroyed)(Depending on the year, non-contractual photo)

€79.20 TTC
(66,00 € HT)

Front brake hose 380 mm - Simca 6

Front brake hose 380 mm - Made in France - Simca 6

Upper front cylinder L or R - Peugeot 404 ALL model except Thermostable

Single piston cylinder with bleeder for front wheel - Ø 28.57 mm - Peugeot 404 ALL model except Thermostable - Upper left or right mounting - (2 upper cylinders and 2 lower cylinders are needed to equip the front) - French manufacture - NON ...

€61.50 TTC
(51,25 € HT)

silent block suspension axle Peugeot 203 utility

Silent block for Peugeot 203 utility suspension blades.Dimensions: Ø int 16 x Ø ext 32mm - L 54 x L50 mm

Connecting rod bearings (set) 47.75 mm dimension 0.25 - Citroen Traction 11D - HY - U23

Set of 47.75 mm connecting rod bearings - dimension 0.25 mm - Citroen Traction 11D - HY - U23Mounts on engines equipped with bearing connecting rods.

Liner Ø 83 finished - semi finished int 82.5 - Peugeot 402

Liner Ø 83 mm finished - delivered semi finished in Ø 82.50 - length 171 mm - Ø 87 (block bore) - collar Ø 88 - High collar 6 mm - Peugeot 402 - sold individually

Valves x 4 - ECH Ø 34x9x112.7 - Citroen Traction 11D

Set of 4 ECH valves Ø 34x9x112.7 - Citroen Traction 11D

Citroen HY graphite thrust clutch - 1963 and late

Graphite stopper for Citroen HY from 1963 petrol engine type ID 19

CHAMBORD exhaust - oval stainless steel silencer (n ° 3) - Simca Chambord

Stainless steel silencer exhaust for V8 Simca Aquilon

€580.80 TTC
(484,00 € HT)

Pellet - set of 4 - Ford Vedette cylinder heads

Set of 4 18.4 mm pellets for Ford Vedette cylinder heads

LEFT 28.5mm rear brake cylinder - Renault SG2 - 1965 to the end

LEFT REAR brake cylinder for single or double circuit, from 1965 to end of series.

€127.50 TTC
(106,25 € HT)

RIGHT rear brake cylinder 28.5mm - Renault SG2 - 1965 to the end

RIGHT REAR brake cylinder for single or double circuit, from 1965 to end of series.

€127.50 TTC
(106,25 € HT)

Set of 4 front brake shoes 45 mm - HY or type H Citroen - until 02/1962

Set of 4 front brake shoes - standard exchange. (Send us your set before shipping the new one). High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes.

€134.90 TTC
(112,42 € HT)

Rear brake cylinder 28.5 mm - citroen U23

Rear brake cylinder d 28.57 mm (1'1 / 8). French made

€138.00 TTC
(115,00 € HT)

Set of 4 rear brake shoes - citroen traction

Set of 4 rear brake shoes in standard exchange. (Send us your set before shipping the new one)High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes.

€118.80 TTC
(99,00 € HT)

Citroen H and HY tandem master cylinder

Tandem master cylinder (dual circuit) 25.4 mm fitting citroen HY from 1975

€442.80 TTC
(369,00 € HT)

Set of 4 Rosengart brake shoes

Set of 4 relined brake shoes, in standard exchange. (Send us your set before shipping the new one) High performance friction, applied by industrial bonding, no more rivets which damage the drums. Micro blunt brake shoes.

€120.00 TTC
(100,00 € HT)

Ford Vedette bearings - 010 - 53.04 mm

Set of bearings for Vedette Ford 1949 -54 engine. (1 rear flanged bearing + 2 front and central single bearings) Dimension: .010 US (i.e. + / - 0.25 mm)

Front brake hose 380 mm - Ford Vedette 1949

Ford Vedette 1949 FRONT brake hose. Length 380 mm.

Revue Technique Rosengart LR - RTA

exhaust - stainless steel Y tube (n ° 1) - Simca Chambord

" Stainless steel exhaust - Y connecting the 2 cast iron manifolds to the line. Part n ° 1 on the photo "

Vintage stock seal : high engine cover with cylinder head gasket - Renault Fregate engine 668/671

Gasket kit for high engine Renault type 668 and 671 (11 and 12hp) (Colorale, Goélette, R2087, Frégate, etc.) .New original stock. Includes:- cylinder head gasket, - inter-manifold joint,- rocker cover gasket,- 8 seals for valve stem,- 2 ADM / ECH ...

Poussoir pour tige soupape - Citroen HY

Set of 3 25mm pellets for cast iron cylinder head - Citroen Traction U23 HY

Set of 3 Ø25mm pellets only for cast iron cylinder head - Citroen Traction U23 HY

Set of 4 30mm pellets for cast iron cylinder head - Citroen Traction U23 HY

Set of 4 Ø30mm pellets only for cast iron cylinder head - Citroen Traction U23 HY

Rear brake cylinder Ø 23.81 mm - protruding cone - Simca 1300 1301 1501

Rear wheel cylinder. Left or Right Mount - Simca 1300 1301 1501Diameter: 23.81 mm - Version with cone exiting at the bottom of the tapping of the liquid inlet. Entry 3/8 24f

€79.80 TTC
(66,50 € HT)

Window cleaners int Simca Chambord

Set of 4 interior window wipers for Simca Chambord.Adaptable model. Reuse the metal strips to form the rounded parts.

Set of main bearings standard engine dimension 839 - renault 4cv Dauphine 4L - 747 - 782 and 845 cm3

Renault 4cv Dauphine 4L - 747 - 782 and 845 cm3

rear window seal with key - citroen U23

rear window seal with key - citroen U23

Clutch disc Citroen U23

Clutch disc reconditioned, in standard exchange for Citroen U23 and derivatives. Complete disassembly, micro balling and painting. (The sending is done after receipt of the used mechanism, not destroyed)(Depending on the year, non-contractual photo)

€141.60 TTC
(118,00 € HT)

Plate equipped for front left or right turn signal - Ford Vedette

Plate fitted for front left or right turn signal - Ford VedetteSupplied with the cork gasket, sockets with wires.Delivered without lamp.

Silent blocks and flector kit for wiper motor

Replacement kit for wiper motors (rectangular shape). French manufacture by Techni-Tacot.Including:-1 coupling flector (toothed wheel),-3 square silent blocks + 3 cylinders for fixing between engine and sheet metalSuitable for the following ...

Front hub sealing ring - Simca Chambord 61 or Ariane

Front hub sealing ring - Simca Chambord 61 or Arianeapprox.41.4 x 62 x 12.2

Set of 4 rubber rings for Peugeot 203 pivots

Set of 4 rubber rings for Peugeot 203 pivots.Approximate dimensions:- 7 x 33 x 41 mm- 7.5 x 25 x 34 mmAllows to equip the 2 steering pivots.

Segment set Ø 72 mm Simca 2.5x2.5x2.5x4 - 4cyl

Segment set Ø 72 mm Simca 2.5x2.5x2.5x4 - 4cyl

Black gear lever knob for Simca Chambord Vedette dashboard

Gear shift knob, in black lacquered resin Simca Chambord, with insert for thread, according to the origin

Carburetor similar to the Solex 32 PBIC Traction Citroen type

New carburettor similar to the Solex 32 PBIC type. Vacuum outlet on foot base. Configuration for Citroen TractionNozzle 26 - Main jet 135 and automatic nozzle 190 - Emulsion19 - Idle 50 - idle air 130 - Needle 1.5 - Float 12.5 gr - Accelerator ...

Front brake hose 450 mm - Renault Galion

Front brake hose - Length 450 mm - 2 threaded ends d 17 mm.

Front brake hose 590 mm Renault Galion

Flexible fein AV. Length 590 mm. Renault Prairie, R2087, Goélette etc. External thread (metal color on the photo) = 10.9 mm - Internal thread (yellow color on the photo) = 11.2 mm.Remember to replace the copper seal on the male thread sideFor ...

Anglia 110mm oil filter for Ford Anglia

Oil filter cartridge - H = 110 mm. Please note there is also a shorter model: 80mm. Take the time to measure your model before ordering.(Non contractual photo)

Set of 4 relined front brake shoes Simca 8 brake

Set of 4 relined brake shoes (front) for Simca 8 in standard exchange. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets which can damage the drums.Shipping upon receipt of worn parts.

€112.00 TTC
(93,33 € HT)

CHAMBORD exhaust - n2 - stainless steel primary tube - Simca Chambord

Primary tube between the "Y" and the silencer - Part 2 on the photoAll stainless steel.

€116.40 TTC
(97,00 € HT)

Rear window seal Simca Chambord

Rear window seal Simca Chambord, Beaulieu, Présidence, Marly 2

Essuie glace - Balais inox x 2 - 200 mm

Balais d'essuie glace inox. Longueur 200 mm. Vendu par 2

Ford Anglia 105 / 106E belt

Accessory belt for Ford Anglia 105 and 106 E from 01959 to 1967.

Rod bearings Renault Goelette Frégate dimension 0.25 - 54.75 mm

Set of 8 connecting rod bearings dimension 0.25 crankpin d 54.75 mm - Renault, Colorale, Goélette, R2087, Frégate, Sg2, etc).668 and 671 engine and super standard 817 - 2.6 L

Set of 4 relined front brake shoes Simca Ariane

Set of 4 relined brake shoes (Front) for Simca Ariane 4 or Ariane 8 - in standard exchange. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets which can damage the drums.Shipping upon receipt ...

€112.00 TTC
(93,33 € HT)

Citroen HY 22mm rear brake cylinder

Rear brake cylinder for Citroen HY or type H piston diameter = 22 mm. (until 1966)All the brake parts we sell are made in France.

€76.74 TTC
(63,95 € HT)

Simca Versailles Chambord oil pump pinion

Replacement pinion for oil pump - V8 Simca (Versaille, Chambord, etc.). Supplied with 4 rivets. (Advantageously replaces the celoron one which has become fragile over time). Attention for Ford Vedette 12hp 2150 cm3 V8s, choose the reference " ...

€187.00 TTC
(187,00 € HT)

Steering rack - Renault Colorale

Silent block ("Diabolo") mounted on the steering gear side. Sold in pairs - Ø 100mm

Ford Anglia low hose on main radiator

Low hose on main radiator. Ford Anglia 105E or 106E

Stainless heating steel T hose for Ford Vedette

Stainless steel T allowing the heating return to be connected to the lower main radiator hose. Ford Vedette, Vendôme or other vehicle using this system.

Butée conique caoutchouc Peugeot 203-403

Conical rubber front bottoming stop - Peugeot 203 and 403Ø46 - height 60 mm

Brake cylindre - front - 31.75 mm - Peugeot D4A D4B

Cylindre avant  31.75 mm - Peugeot D4A D4B Retirer le purgeur pour le cylindre qui reçoit le liquide et le renvoie au second cylindre. (4 cylindres pour un véhicule) Vendu à l'unité

Rear brake hose 140 mm Citroen Traction

Rear brake hose 140 mm long. Traction 7.11 and 15hp.

Oil pressure contact mano - Ford Vedette 1949 - 54

oil pressure switch for Ford Vedette engine from 1949 to 1954 - Thread M 10x100

Stainless steel screw-on interior mirror

rearview mirror

Connecting rod ring - HY

Connecting rod ring - HY

frais nettoyage + ré-emballage suite produit monté ou sachet ouvert

BENDIX launcher for starter - Citroen Traction

BENDIX launcher for starter - Citroen Traction

Master cylinder outlet connection with banjo

MASTER CYLINDER OUTLET CONNECTION WITH BANJOBolt M1 / 2 * 20F-F7 / 16 * 20FBanjo D15 F3 / 8 * 24F 84 °

€40.25 TTC
(33,54 € HT)

Front brake cylinder 28.5 mm - citroen U23

Front brake cylinder d 28.57 mm (1'1 / 8). French made

€138.00 TTC
(115,00 € HT)

Red indicator light 12 v - Ø 12 mm - alternator charge indicator

Red indicator light 12 v - Drilling at 12 mm - alternator charge indicator

Copper gasket 11.50 x 20 for front brake hose - Peugeot 404

Copper gasket 20x11.50 mm thickness 1mm

€1.80 TTC
(1,50 € HT)

Thermostable rear brake cylinder Ø 19.00 mm - Peugeot 404

Rear wheel cylinder L or R Ø 19 mm. Liquid inlet 3/8 - French manufacturing

€55.56 TTC
(46,30 € HT)

Screw-in oil filter - D 95 x 136 mm - Renault 817 SG2

Oil filter Ø 95 x L 136 - Renault 817 SG2     Dimensions:     A: 96 mm - outer diameter.     B: 63 mm - int.     C: 72 mm - int.     D: 3/4"-16 UNF - Connection thread     E: 136 mm - height

Bielle neuve pour montage avec coussinet - Citroen Traction 11cv et 15 cv

Window slide set for 2 doors - citroen U23

Window slide set for 2 doors - citroen U23

Set of 2 windscreen gaskets with key - citroen U23

Set of 2 windscreen gaskets with key - citroen U23

Transparent flashing light - Citroen HY

Transparent light - without lamp - Citroën HY

Gray needle button for Ford Vedette 53 and 54 dashboard

Resin button with Ford Vedette gray lacquered needle, with thread insert, as original.Sold individually. Please note this model with anti-rotation needle screw is intended for Fog and Heating controls (1953 to 54)

Cylinder - front copper seal kit for one wheel - Panhard Dyna Z

Set of 2 seals for hollow screw and banjo (for 1 cylinder)Internal Ø 11 mm and 15 mm

€4.08 TTC
(3,40 € HT)

set of 2 diabolos - steering silent block - Simca 9 - Aronde - P60

set of 2 diabolos - steering silent block - Simca 9 - Aronde - P60Mounted at the ends of the long steering rod under the radiator.

Fuel gauge - Peugeot 404 all models

Fuel gauge - Peugeot 404 all models

Engine gaskets kit - Simca 9 - 1221 cm3 engine

Gasket set with cylinder head gasket for Aronde Simca 9 - 1221 cm3 engineIncludes engine gaskets including cylinder head gasket, and oil seal ring for crankshaftNon contractual photo. Not suitable for Flash or Rush engines.

Belt width 10 mm - Simca Aronde P60 Ariane

Belt width 10 mm - Simca Aronde P60 Ariane

Connecting rod bearings (set) 47.50 mm dimension 0.50 - Citroen Traction 11D - HY -U23

Set of 47.50 mm connecting rod bearings - dimension 0.50 mm - Citroen Traction 11D - HY - U23Mounts on engines equipped with bearing connecting rods.

Ignition - 123 tune 12 v programmable electronic ignition for Renault Prairie Fregate

Electronic ignition for 12V vehicle - 123 Programmable Ignition (123 Tune) for 4 cylinder engine.Installs in place of your original model. Everything is integrated in the body of the igniter (no remote box).Supplied with adjustment and assembly ...

Valves x 4 - ADM Ø 37x8.5x116.4 - Peugeot 203 - 403

Set of 4 ADM valves Ø 37x8.5x116.4 - Peugeot 203 - 403

Segment set Ø 80 mm Peugeot 403 - 2cx2x4.5x4.5

Segment set Ø 80 mm Peugeot 403 - 2cx2x4.5x4.5

Rear brake cylinder -25.4 mm - incoming cone - Peugeot D3A ET D4 - 04/64 a 05/65

Rear wheel cylinder d 25.4mm, Peugeot D3A - D4 D4A D4B - 04/64 to 05/65.Model with cone entering the liquid inlet well. Non contractual photo.

€51.90 TTC
(43,25 € HT)

Speedometer cable - Peugeot 203 - all models

Speedometer cable for Peugeot 203 convertible, sedan, commercial pick-up, all models (Non-contractual photo)

Set of 4 relined rear brake shoes Simca Ariane

Set of 4 relined brake shoes (Ar) for Simca Ariane 4 or Ariane 8 - in standard exchange. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets which can damage the drums.Shipping upon receipt of ...

€136.80 TTC
(114,00 € HT)

Set of 4 rear brake shoes 403 UtilityU8 Peugeot

Set of 4 rear brake shoes - standard exchange. (Send us your set before shipping the new one). High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes.

€139.20 TTC
(116,00 € HT)

Set of 4 rear brake shoes Simca 6

Set of 4 rear brake shoes relined, in standard exchange for Simca 6 (non contractual photo). High performance friction, excellent grip, applied by industrial bonding, elimination of rivets which damage the drums. Pickled and varnished brake ...

€108.00 TTC
(90,00 € HT)

Bearing (4x4 version) front outer hub - Renault Prairie R2087 Goelette

Front hub bearing (external) for Renault 4x4 Colorale, R2087, Goélette etc.1 per side of the wheel (i.e. 2 per vehicle)Be sure to check the dimensions BEFORE orderingOverall dimensions: 42.86 x 82.55 x 19.84 / 15.08