Front brake cylinder 31.75 mm - SAMBRON
Front brake cylinder - Ø 31.75 mm - Sambron
(69,50 € HT)
Adapter connection 7/16 male - 3/8 female
Adaptateur freinage mâle 7/16 (envion 11mm) femelle 3/8
(17,50 € HT)
Master cylinder kit 38.1 mm - Renault Galion
Repair kit for 38.1 mm master cylinder.
(74,75 € HT)
Brake cylinder 28.5mm - entry 11mm (7/16th) - Peugeot Q3A
Brake cylinder 28.5mm - entry 11mm (7/16th) -
(65,00 € HT)
Remise en état lot de pièces spécifiques
(90,00 € HT)
segment set 85 mm 2x2x2x4x4 Renault Fregate
Set of 20 segments for 4 eyebolts dimension 85 mm - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 2 mm2 x scraper in 4 mmPossibility of ordering in 85 mm (call us)
(138,00 € HT)
copy of Oil pressure contact mano - Ford Vedette 1949 - 54
oil pressure switch for Ford Vedette engine from 1949 to 1954 - Thread M 10x100
(10,50 € HT)
Rear brake cylinder 19mm - 3/8 Panhard 24 - 07/1964 to end
Rear wheel cylinder 19mm - Panhard 24 équipé frein à tambours - 07/1964 à fin de série
(57,60 € HT)
Best Sellers
Ignition capacitor 6, 12 and 24V
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Rear brake cylinder 28.57 mm - 1 1/8 Renault Colorale, Prairie, R2087, Goelette
" Rear wheel cylinder. Diam: 1" "1/8 or 28.6 mm. Liquid inlet diameter = 11.4 mm (1/2 20 f / p) Renault Colorale, Prairie, R2087, Goélette, 1000 kg, 1400 Kg and derivatives . "
(75,35 € HT)
Front brake cylinder kit 34.9 mm - 1 3/8 Renault Prairie R2087 Goelette
Repair kit for AV cylinder. d 34.93 mm
(16,00 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,35 € HT)
Ignition - 4 x Spark plugs for Renault Fregate
Set of 4 NGK spark plugs with std base (14 mm), Renault Fregate, Colorale, Prairie engine (side engine 603 and tumbled 668 or 671), R2087, Goélette, Galion, SG2 gasoline (engine 671 or 817) etc. Compatible with SP95 and SP98 fuels
(20,00 € HT)
Best sellers There are 1556 products.
Set of 4 SUMB Marmon brake shoes
" Set of 4 relined brake shoes, in standard exchange. (Send us your set before shipment of the new one) High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes. (non ...
(176,00 € HT)
Spark plug ignition with 18 mm base
NGK big base spark plug (18 mm), for cylinder head. Specially adapted to pre-war. Sold individually
(7,46 € HT)
silent block gearbox Renault Prairie R2087 Goelette
Silent block for rear mounting on gearbox.
(56,00 € HT)
Brake master cylinder 31.7 mm - Renault Colorale Prairie R2087 Goelette
" Complete master cylinder with bellows: D 1'1 / 4 or 31.75 mm - inlet 3/4 - 16 f outlet 1/2 - 20f Entry in 18 mm. If the old model was 22 mm, order the adapter here . p> For Renault Prairie, Colorale, R2087, Goélette, R2065, R2066, Galion ...
(119,00 € HT)
Set of 4 Ford Anglia front brake shoes
Set of 4 front brake shoes in standard exchange. Ford Anglia 105 and 106 E. Shipping takes place after receipt of your worn brake shoes.
(92,00 € HT)
Radiator cap small model Ford Vedette Simca
Radiator cap, small model. For radiator neck approx. 56 mm Valve diameter approx. 39 mm
(27,88 € HT)
Ford Vedette cylinder head bolt set
Set of 34 hexagon head screws to replace the original studs - 3/8 16f / p unc 2 lengths of screws in the set - Allows easy removal of cylinder heads. Tightening 5 m.kg maximum
(138,80 € HT)
Ford Vedette rear suspension blade bush
" Silent block to be mounted in the eyelets of the rear suspension blades - 6 pieces per suspension (or 12 on a vehicle) - Sold individually D int = 12 mm D ext = 20.5 mm approximately D ext with collar = 30 mm Long without collar = 22 mm "
(11,95 € HT)
Rear brake cylinder 25.4 mm - 1954 - inclined exit - Ford Vedette
Rear wheel cylinder d 25.4mm, inclined pipe inlet. Montage 1953 and 1954. NON-CONTRACTUAL photo.
(49,00 € HT)
Rear brake cylinder rebuild kit 19mm - Simca Chambord
" Complete overhaul kit for a rear wheel cylinder. Diameter: 23.81 mm "
(20,00 € HT)
22mm master cylinder kit Simca Versailles Chambord
Complete overhaul kit for 22 mm master cylinder.
(26,00 € HT)
Front RIGHT brake cylinder 22 mm - Renault 4CV - feb 56 end of series
Front RIGHT brake cylinder 22 mm - Renault 4CV - feb 56 end of series
(60,00 € HT)
Set of bearing bearings dimension 0.25 engine 839 - renault 4cv Dauphine 4L - 747 - 782 and 845 cm3
Renault 4cv Dauphine 4L - 747 - 782 and 845 cm3
(20,00 € HT)
Front hub bearings kit - Citroen U23
Front hub bearings kit - Citroen U23. Includes:1 conical bearing 38x76 mm1 tapered bearing 24.57 mm1 waterproof ring 50x76This kit allows you to equip a wheel
(104,50 € HT)
FRONT brake spring kit - Peugeot 404 - WITHOUT hydrovac
Brake spring kit for front wheels WITHOUT hydrovac Peugeot 404
(24,40 € HT)
Valves x 4 - ADM ECH Ø 35x9.5x138 - 60 degrees - Citroen C4G C6G
Set of 4 ADM ECH valves Ø 35x9.5x138 - 60 degrees - Citroen C4G C6G
(178,00 € HT)
Liner Ø 72 mm semi finished int 71.50 Citroen C4F C6F - Peugeot 301
Liner Ø 72 mm delivered semi finished in Ø 71.50 - length 193 mm - Ø 76 - collar Ø 77 - High collar 6 mm Citroen C4F C6F - Peugeot 301 - sold individually
(59,93 € HT)
Rear brake hose - 254mm - Peugeot D3
Rear brake hose Peugeot D3 D3A D3B etc. Length 254 mm. tip Ø 17 mm approximately
(25,00 € HT)
Ignition - SEV Peugeot D3 D4 distributor head
SEV distributor head for Peugeot D3 D4
(24,92 € HT)
Lower hose Simca 9 Aronde P60 Ariane
Lower hose Simca 9 - Aronde - P60 - Ariane
(25,00 € HT)
Silent block for stabilizer bar Ø 19 mm Simca Ariane
Silent block for connection between stabilizer bar and suspension pivot mounted on Simca Ariane 2.Attention there are 2 models. Thread of stabilizer bar in 19 mm - Internal diameter silents block = 23.6 mm - tapered outer diam 33 to 35 mm - ...
(37,40 € HT)
Peugeot 203 403 shock absorber oil can
Oil can for Peugeot 203 and 403 shock absorbers (1L)
(19,58 € HT)
Front shocks Simca Versailles Chambord Ariane
Front shock absorbers for Simca Trianon, Versailles, Régence, Marly 1 and 2, Beaulieu, Chambord and Présidence. New products of current manufacture of the Record brand, 100% conform to the original assembly. Supplied with protective bellows.Sold ...
(232,50 € HT)
Lower hose Renault SG2 TP3
Lower hose for Renault SG2. Long dimension approx. 270 mm, short side 160 mm, diam 35 mm approx
(48,00 € HT)
Front cylinder - Peugeot 203 - all models
" Front brake cylinder. D 1" "1/4 (31.75 mm). Fits vehicles from July 54 but can be fitted on ALL models. Advantageously replaces cylinders in 1'1 / 8 (before 06 / 1954). More efficient braking. Sold individually (1 cylinder per wheel). Entry ...
(42,15 € HT)
Connecting rod bearings set - Peugeot 203 - 403 standard dimension
Set of bearings for 4 Peugeot 203 and 403 connecting rods. Standard original dimension. French manufacture.
(135,00 € HT)
Complete master cylinder 25.4mm - Citroen Traction
" Complete master cylinder D 25.4 mm. For Traction 7.11 and 15 hp. Piston 1 p or 25.4 mm Outlet 1/2 20 f per inch Inlet 17 mm approximately Center distance 60 mm for M 8 screws "
(52,00 € HT)
Steering rack - Renault Colorale
Silent block ("Diabolo") mounted on the steering gear side. Sold in pairs - Ø 100mm
(50,00 € HT)
Oval silent block engine Renault Prairie R2087 Goelette
" Front engine mounting silencer. Oval model. Sold individually. Overall length 118 mm fixing hole center distance: 95 mm - Ø 11mm holes width 75 mm central Ø: 12.2 mm height 30 mm metal plate thickness = 6mm "
(41,58 € HT)
Front brake cylinder 34.9 mm - 1 3 / 8F Renault Colorale Prairie R2087
" Front wheel cylinder. Diam 1" "3/8 or 34.9 mm. Fixing by 2 M8 type screws - Ø liquid inlet = 7/16 p To recognize the model it is enough to measure the connection which is screwed in the entry of the cylinder = 11 mm. or look at the 3rd photo ...
(78,72 € HT)
Set of 4 Ford Anglia rear brake shoes
Set of 4 rear brake shoes as standard exchange. Ford Anglia 105 and 106 E. Shipping takes place after receipt of your worn brake shoes.
(93,33 € HT)
Ford Vedette large model radiator cap
Radiator cap, large model. For radiator neck approx. 66 mm Valve diameter approx. 49 mm
(35,30 € HT)
Pellet set of 4 - Ford Vedette and Simca engine block
Set of 4 pellets for Vedette Ford and Simca engine block diam. about 44 mm.
(44,00 € HT)
Grease cover on lower wishbone chassis side - Ford Vedette
Silent block fitted to the lower wishbone axes - Reference Ford 3194 - 4 per vehicle - Sold individually - (18112)
(18,50 € HT)
Brake reservoir with rubber
Translucent tank, delivered with bracket; rubber plug and fitting.
(31,75 € HT)
Front brake cylinder D Ø 28.5 mm - with Simca Chambord bleeder
" Front right wheel brake cylinder, equipped with a bleeder - Simca Beaulieu, Chambord, Présidence, Marly 2, Ariane 4 and Ariane 8 - Simca 1300 until September 1965 Diameter 28.57 mm "
(54,70 € HT)
Simca Versailles 19mm rear brake cylinder kit
Complete repair kit for rear wheel cylinder in 19 mm. Supplied with pistons.
(34,00 € HT)
Front LEFT brake cylinder 22 mm - Renault 4CV - feb 56 end of series
Front LEFT brake cylinder 22 mm - Renault 4CV - feb 56 end of series
(59,30 € HT)
U23 bridge entry seal kit
(42,00 € HT)
Peugeot D3A Rear Hub Kit
Attention non-contractual photo. Kit for 1 rear hub - Peugeot D3A. Includes:2 bearings and a sealed ringKit for a left or right hub
(75,00 € HT)
Front lower brake cylinder L or R 28.5mm - Peugeot 404 ALL model except Thermostable
Single piston cylinder with bleeder for front wheel - 7/16 inlets - Lower front cylinder L or R - Peugeot 404 ALL model except Thermostable - Lower left or right assembly - (2 upper cylinders and 2 lower cylinders are required to equip the front) ...
(51,25 € HT)
Pistons liners kit Ø 58.00 mm Renault 670.1 - 800.01-02 - 845 cm3 Dauphine - R4
Pistons liners kit Ø 58.00 mm Renault 670.1 - 800.01-02 - 845 cm3 Dauphine 4L- R4
(245,00 € HT)
Liner Ø 75 mm semi finished int 74.50 for Citroen C4G C6G
Liner Ø 75 mm delivered semi finished in Ø 74.50 - length 193 mm - Ø 78 - collar Ø 79 - High collar 5 mm - Citroen C4G C6G - sold individually
(51,70 € HT)
Front brake hose - 470mm - Peugeot D3
Front brake hose Peugeot D3 D3A D3B etc. Length 470 mm. tip Ø 17 mm approximately
(25,00 € HT)
bush side axle fits to rear axle half shaft 32mm - Peugeot 203
Sealing ring for 1/2 wheel shaft. Replaces the bakelite rings located in the rear axle trumpets on Peugeot 203.Used to stop the oil from the axle towards the rear hubs. (2 per car) Sold individually
(13,65 € HT)
Front brake cylinders x2 - 28.5mm -Simca Aronde P60 nov 57 a end
Front wheel cylinder R - d 28.57 mm. Entry 3/8 Left mounting. Length 72 mm - inside liquid passage = 8.5 mm.Aronde and P60 from nov 57 end to end of series
(137,80 € HT)
Master cylinder Panhard PL 17 and 24
Master cylinder for Panhard Pl 17 and 24 - diam 22 mm. French made
(73,84 € HT)
Front upper brake cylinder L or R 28.5mm - Peugeot 403
Single piston cylinder with bleeder for front wheel - Peugeot 403 all models - Ø 28.57 mm. Upper left or right mounting - (2 upper cylinders and 2 lower cylinders are needed to equip the front of a 403) - NON CONTRACTUAL photo.
(51,25 € HT)
Set of 4 relined brake shoes Panhard Dyna x86
Set of 4 relined brake shoes (front or rear) 195 mm x 30 mm in standard exchange for Panhard Dyna X86, Dyna Z, PL 17 and series 24Microblasting, varnish, industrial bonding of friction. Strong adhesion.Eliminates the problem of rivets that could ...
(98,00 € HT)
Set of 4 rear brake shoes HY or type H Citroen
Set of 4 rear brake shoes - standard exchange. (Send us your game before shipping the new one). High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes.
(105,00 € HT)
Low hose for Ford Vedette
Low hose for Ford Vedette. (2 hoses per vehicle). Delivered individually. Add a stainless steel T if leaving to the heating radiator (available in the shop). Depending on the radiator model, length to be cut.
(21,00 € HT)
Rear brake cylinder - Peugeot 203
" Rear brake cylinder. D 1" "(25.4 mm). Mounts on all models. Sold individually (1 cylinder per wheel) "
(42,00 € HT)
Front brake cylinder Left or Right 31.7 mm - Citroen Traction
" Left or Right front wheel cylinder with bleeder. For Traction 7 and 11 hp. "
(49,45 € HT)
Front brake cylinder - Left or Right 28.6mm - Renault Fregate
" Front right or left wheel cylinder for Renault Frégate (2 per wheel) Non-contractual photo. "
(82,00 € HT)
Stainless steel - cylinder head water tube - Renault Fregate, Prairie, R2087, Goelette
" Internal water pipe for cylinder head. Engine type 668, 671 (11 and 12hp), 817 (sg2 petrol) etc. Manufactured in stainless steel to eliminate corrossion problems. Supplied with assembly diagram. "
(33,25 € HT)
Sealing ring gearbox - outlet - Renault Prairie
Sealing ring (oil seal) for the gearbox outlet.
(14,07 € HT)
Front brake cylinder 34.9 mm - 1 3 / 8U Renault Colorale, Prairie
"Front wheel cylinder. Diam 1" "3/8 or 34.9 mm. Fixing by 2 screws type US 5/16 - 24f / p Ø liquid inlet = 1/2 pTo recognize the model it is enough to measure the connection which is screwed in the entry of the cylinder = 12.5 mm. For Renault ...
(78,50 € HT)
Rear brake hose - Ford Anglia
Rear brake hose for Anglia 105E and 106E. Sold individually. The vehicle requires 3 hoses (2 x AV and 1 x AR)
(25,08 € HT)
Grease cover on upper triangle wheel side - Ford Vedette
Protection mounted on the upper arm on the wheel pivot side - Ford reference - 3075 - 4 per vehicle - Sold individually.
(15,13 € HT)
Silicone brake fluid DOT 5 - 1L
" DOT 5 100% silicone brake fluid - 1L can - Purple color - Do not mix with other types of brake fluids. The installation must be rinsed before changing the type of liquid. Photo not contractual. "
(44,96 € HT)
Brake reservoir - male thread + electrical contact
Brake fluid reservoir, translucent plastic. With cap, mounting bracket and electrical contact for low fluid level
(39,50 € HT)
Wooden steps - pair - Renault Goelette R2087 Galion voltigeur
Set of 2 wooden steps - (left + right) - Quality manufacturing by carpenter - doweling and gluing - multi-layer varnishing - Ash wood- Renault Goelette 2087 Aerobatic galleon
(203,00 € HT)
Set of main bearings standard engine dimension 839 - renault 4cv Dauphine 4L - 747 - 782 and 845 cm3
Renault 4cv Dauphine 4L - 747 - 782 and 845 cm3
(20,00 € HT)
Clutch disc 215mm - PEUGEOT 404
Clutch disc reconditioned, in standard exchange for PEUGEOT 404 and derivates. Complete disassembly, micro balling and painting. (The sending is done after receipt of the used mechanism, not destroyed)(Depending on the year, non-contractual photo)
(95,00 € HT)
Rear brake cylinder - 25.4mm - Peugeot 404 (click on detail)
Rear wheel cylinder d 25.4mm, inclined pipe inlet 7/16 e piston Ø 25.4 mm.Exiting cone visible at the bottom of the liquid inlet on the cylinder.404 assembly:- petrol sedan: start at 10/67- Diesel sedan: start at 09/68- Coupe convertible ...
(49,00 € HT)
Citroën HY rear hub oil seal
Sealing ring (spinnaker) for rear hub Citroen HY, type H, HW. Sold individually
(13,65 € HT)
Peugeot 203 rear hub kit
Kit for 1 rear hub Peugeot 203 including 1 bearings and a sealing ring - brand bearing (no remanufacturing unknown). Sold individually. (2 kits are needed to equip a car)
(45,00 € HT)
Windscreen seal Simca Chambord
Windscreen seal Simca Chambord, Beaulieu, Présidence, Marly 2
(180,00 € HT)
Silent bloc pour barre stabilisatrice Ø 19 mm Simca Chambord
Silent bloc pour liaison entre barre stabilisatrice et pivot de suspension monté sur Simca Chambord , Beaulieu Présidence et Marly II. Filetage de barre stabilisatrice en 19 mm - Diamètre intérieur silents bloc = 23.6 mm - diam ext conique 33 à ...
(37,40 € HT)
Brake hose 367 mm - front or rear - Simca Aronde P60
Front or rear brake hose 367 mm long.Male ext 9mm - female int Ø 8.3 mmMounts on Simca Aronde or P60 from Nov 1957 to Dec 1963.Check with your model before ordering.
(21,00 € HT)
Front hub kit Simca Versailles - Chambord 58/60
Front hub repair kit with D 19mm spindle, for Trianon, Versailles, Régence, Marly 1. All models (except 1954), including Chambord 58 to 601 outer conical bearing1 internal tapered bearing1 sealed ringValid for one wheel. Be careful not to fit on ...
(82,00 € HT)
Master cylinder 25.4 mm - Panhard Dyna Z
Complete master cylinder (piston d 25.4 mm). Fits Dyna Z 1954 thru June 1958.Piston 1 p or 25.4 mm1/2 output 20 f per inchEntry about 17 mm60 mm center distance for M 8 screws
(52,00 € HT)
Citroen H and HY tandem master cylinder
Tandem master cylinder (dual circuit) 25.4 mm fitting citroen HY from 1975
(358,00 € HT)
Set of 4 relined front brake shoes Citroen U23
Set of 4 relined brake shoes (Front) in standard exchange for Citroen U23. Microblasting, varnish, industrial bonding of friction. Strong adhesion.Eliminates the problem of rivets that could damage the drums. Shipping upon receipt of worn ...
(145,00 € HT)
Rear brake cylinder 44.4 mm - Renault Galion1p 3/4 -
For Renault Galion 2t5 and other derivatives in heavy vehicle version.Wheel cylinder inner diameter 44.5 mm or 1 3/4 inch.Liquid inlet 1/2 20F / P
(153,50 € HT)
SUMB Marmon disc clutch
Clutch disc reconditioned, in standard exchange for SUMB Marmon. Complete disassembly, micro balling and painting. (The sending is done after receipt of the used mechanism, not destroyed)(Depending on the year, non-contractual photo)
(116,00 € HT)
Master cylinder 25.4 mm - Peugeot 203
" Complete master cylinder for Peugeot 203 Piston 1 p or 25.4 mm Outlet 1/2 20 f per inch Inlet 17 mm approximately Center distance 60 mm for M 8 screws "
(52,00 € HT)
Citroen Traction rear brake cylinder - 7 - 11 - 15 HP
Rear wheel cylinder - Traction 7.11 and 15 hp. diam 25.4 mm
(45,25 € HT)
Rosengart LR4 cylinder head gasket and derivatives
Cylinder head gasket for LR2, LR4, LR4N2 and derivatives.
(82,78 € HT)
Rear brake cylinder - 25.4 mm -Renault Fregate
Rear wheel cylinder d 25.4mm for Renault Frégate. (1 per wheel)
(42,00 € HT)
Sealing ring front hub 50x80 - Renault Colorale prairie 2 wheels
" Sealing ring (oil seal) for front drum for Renault Colorale 2 wheel drive and derivatives. size 50x80 mm "
(16,80 € HT)
Rear brake cylinder 28.57 mm - 1 1/8 Renault Colorale, Prairie, R2087, Goelette
" Rear wheel cylinder. Diam: 1" "1/8 or 28.6 mm. Liquid inlet diameter = 11.4 mm (1/2 20 f / p) Renault Colorale, Prairie, R2087, Goélette, 1000 kg, 1400 Kg and derivatives . "
(75,35 € HT)
Rod bearings Ford Vedette 53-54 or Simca Chambord - STD - 44.59 mm
" Set of bearings (16 half-shells) for Ford Vedette 2nd generation 1953-54 and Simca V8 engines. Dimension: STD - 44.59 mm Each connecting rod receives its pair of bearings. "
(365,83 € HT)
Grease cover on upper triangle frame side - Ford Vedette
Rubber protection mounted on upper triangle - Ford reference (3196) - 4 per vehicle - Sold individually.
(18,75 € HT)
Set of 4 front jaws Ford Vedette
" Set of 4 front brake shoes in standard exchange. (Send us your set before shipping the new one) High performance friction, applied by industrial bonding, no more rivets which damage the drums. Pickled and varnished jaws. (non contractual photo) "
(110,00 € HT)
Front brake hose 349 mm Simca Versailles Chambord Ariane
Front brake hose 349 mm long. (The vehicle has 2 front hoses) For Simca V8, Versailles, Regence, Chambord, Présidence, Trianon, Marly, Ariane 4 and Ariane 8, etc.
(26,00 € HT)
BSX 155 brush set
A set of 4 brushes or carbon brushesDimensions: - 10mm x 25mm x 15mmVoltage: - 12Vreplaces Bosch 2 007 014 071
(10,00 € HT)
Piston liners kit Ø55.80 Renault R4 R5 - mot 839.01 and 06 - 782 CM3
Piston liners kit Ø55.80 - RENAULT R4 Type R1126-2109-2392 - R5 Type R1220Engine 839.01 and 06 - 782 CM3 - Piston height 61.8 mm - piston pin Ø 16 mmThe base gaskets are supplied in the engine gaskets kit only.Connecting rod or crankshaft bearing ...
(308,00 € HT)
Upper front cylinder L or R - Peugeot 404 ALL model except Thermostable
Single piston cylinder with bleeder for front wheel - Ø 28.57 mm - Peugeot 404 ALL model except Thermostable - Upper left or right mounting - (2 upper cylinders and 2 lower cylinders are needed to equip the front) - French manufacture - NON ...
(51,25 € HT)
Silent block rear suspension blades (for two sizes) - Simca Ariane
Set of 12 silent blocks to renovate the two sets of rear suspension blades. (includes 8 long and 4 short)Quality manufacturing in Nitrile, shore life 70, casting with a pressure steel mold (no inclusion).The price allows to equip a vehicle. ...
(117,40 € HT)
Copper liner gasket 62.50 mm - for sleeves 6010A 6013 6020 6036
Copper liner gasket 62.50 mm - for sleeves 6010A 6013 6020 6036. For Renault 4cv engine
(22,50 € HT)
Front brake cylinder 31.75 mm Peugeot D3 - Q3A
Front brake cylinder - Ø 31.75 mm - Peugeot D3 D3A D3B
(42,15 € HT)
Citroën HY front hub oil seal - internal
Sealing ring (spinnaker) for Citroen HY front hub, type H, HW. Sold individually Internal seal (the bigger one)
(13,65 € HT)
Set of 4 front brake shoes Simca 6
Set of 4 relined front brake shoes, in standard exchange for Simca 6 (non-contractual photo). High performance friction, excellent grip, applied by industrial bonding, elimination of rivets which damage the drums. Pickled and varnished brake ...
(90,00 € HT)
Seal 4 doors Simca Versailles Chambord
Set of 4 door seals for Simca Versailles, Ariane, Chambord etc.