Coussinets bielle moteur Renault Frégate cote STD - 52 mm

Jeu de 8 coussinets de bielle cote STD maneton d 52.00 mm - Fregate moteur 668 - 11cv - 2L (ancien stock neuf)

Set of 2 Ford Vedette pivots 1949-52

Set of 2 pivots (in standard exchange), ready to install. The set includes 1 pivot G + 1 pivot D, new bronze bushings, treated steel pivot pins, rectified axis line.Mounts on:- Ford Vedette from 1949 to 52- some Vedette 1953- Comète 13 and 22cv, ...

Rear shock absorbers Simca Aronde 51 to 58

Rear shocks for Simca Aronde from 1951 to 1958 (spring leaves)Record brand, 100% conforms to the original assembly.Price of the pair.

Connecting rod bearings set - Peugeot 203 - 403 dimension 0.50

Set of bearings for 4 Peugeot 203 and 403 connecting rods.Repair dimension 0.50. French made.

Bearing clutch: replacement bearing - Ford Anglia

Bearing for thrust ball - clutch Ford Anglia. Non contractual photo.

Set of 4 rear brake shoes Mercedes 190 SL

Set of 4 rear brake shoes in standard exchange. (Send us your set before shipping the new one)High performance friction, applied by industrial bonding, no more rivets damaging the drums. Micro billed and varnished brake shoes.(Non contractual photo)

€134.40 TTC
(112,00 € HT)

Brake hose 412 mm rear G Panhard PL 17

Rear brake hose G Panhard PL 17 - from April 1962 to the end (Record fitting) - length 412 mm

deposit

setpoint if a pump is not supplied in standard exchange

Hydrovac brake assist Citroen U23

Reconditioned vacuum brake assist (hydrovac). Citroen U23 fitting or similar vehicle. Complete disassembly, micro balling, replacement of wearing parts, tests. Lacquering. Very careful work. The refurbished part is sent after receipt of the used ...

Renault Fregate 1953-54 rear shock absorbers

Pair of rear shock absorbers for Renault Frégate from 1953 to 1954.Mounting threaded rod up - eyelet down.Extended = 495 mm (distance measured at the center of the eyelet and at the shoulder of the rod below the thread on the body side)Compressed ...

Ford Vedette refabrication steering wheel

Steering wheel for Ford Vedette, Abeille, etc.Refabrication from the original frame, careful and quality production. Delivered ready to paint, without ring or badge. The shipment is made AFTER receipt of your dilapidated copy (chipped plastic, ...

Master cylinder 25.4 mm - Ford Vedette 1949

Master cylinder, supplied complete with 25.4 mm bellows.Mounts on Ford Vedette 1949 (only)

€129.60 TTC
(108,00 € HT)

Ford Anglia disc clutch

Clutch disc reconditioned, in standard exchange for Ford Anglia. Complete disassembly, micro balling and painting. (The sending is done after receipt of the used mechanism, not destroyed)(Depending on the year, non-contractual photo)

Exhaust - round stainless steel silencer - Ford Vendome - MONTE CARLO

Stainless steel silencer for Ford Vendôme and Monté Carlo. French manufacture.

€546.00 TTC
(455,00 € HT)

Tige culbuteur pour moteur type Frégate

Set of 4 SUMB Marmon brake shoes

" Set of 4 relined brake shoes, in standard exchange. (Send us your set before shipment of the new one) High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes. (non ...

€211.20 TTC
(176,00 € HT)

Set 4 Pistons 56.00 - axle 16 mm - Rosengart LR

Set of 4 pistons for Rosengart LR2, LR4, LR4N2, and derivatives. Current manufacture - Bore 56.00 - 56.50 - 57.00 - 57.50 - 58.00 mm For 12 mm or 16 mm axle (to be specified when ordering). Supplied with axles, segments, circlips. Possibility of ...

Ford Vedette bearings - 020 - 52.79 mm

" Bearing set for Ford Vedette engine 1949 -54. (1 rear flange bearing + 2 front and central single bearings) Dimension: .020 US (0.50 mm) "

Ignition - Ford Anglia platinum screws

Set of platinum-plated screws for Ford Anglia

Ford Anglia horizontal outlet head ignition

Distributor head with horizontal outlets.

Set of 4 Ford Anglia rear brake shoes

Set of 4 rear brake shoes as standard exchange. Ford Anglia 105 and 106 E. Shipping takes place after receipt of your worn brake shoes.

Set of 4 Ford Anglia front brake shoes

Set of 4 front brake shoes in standard exchange. Ford Anglia 105 and 106 E. Shipping takes place after receipt of your worn brake shoes.

Exhaust - Y tube - 2 in 1 stainless steel - Ford Vedette

Stainless steel exhaust - Y connecting the 2 cast iron manifolds to line. Ford Vedette 1949 to 1954.

€415.34 TTC
(346,12 € HT)

Adapter connection 7/16 male - 3/8 female

Adaptateur freinage  mâle 7/16 (envion 11mm) femelle 3/8

Rear brake cylinder 19mm - 3/8 Panhard 24 - 07/1964 to end

Rear wheel cylinder 19mm  - Panhard 24 équipé frein à tambours - 07/1964 à fin de série

€69.12 TTC
(57,60 € HT)

Rack steering bellows - Citroen HY

Rack steering rubber boot - Citroen HYAny modelSold individually (2 per vehicle)

Aviation collex type paste gasket for cylinder head - 450ml

Sealing paste to be applied on both sides of a cylinder head gasket. Product similar to "Collex". Leave to evaporate for about 30 min at room temperature after application, then fit the gasket - improves the seal - recommended with solid copper ...

FLEXIBLE 17MM - 3/8 24F - LONG 320

White-Gray gear lever knob for Simca Versailles et Beaulieu dashboard

Gear shift knob, in Simca Versailles and Beaulieu white-gray lacquered resin, with insert for thread, according to the original

Carburetor 32 PBICA - Peugeot 403 and 404

Carburateur neuf type Solex 32 PBICA. Se monte sur Peugeot 403  404. Selon modèle ajuster gicleurs, buse et réglages  

Jeu tapis avant - 4 parties - Peugeot 203 1er modèle

Jeu joints bas de marche de porte - Peugeot 203 cabriolet

Jeu joints pour 2 x portes - Peugeot 203 cabriolet

Ignition wares - 5 wires Ford Anglia

Ignition wires - 5 wires. Mounts with horizontal outlet head.

copy of Pistons liners kit Ø 58.00 mm Renault 670.1 - 800.01-02 - 845 cm3 Dauphine - R4

Pistons liners kit Ø 58.00 mm Renault 670.1 - 800.01-02 - 845 cm3 Dauphine 4L- R4

Cylindre frein arrière 22 mm - Panhard Dyna Z - montage RECORD

Rear L and R brake cylinder Panhard Dyna - Diam 22mm - RECORD.Sold individually (1 cylinder per wheel)

€76.80 TTC
(64,00 € HT)

Seals for quarter panel x2 Simca Chambord

Set of 2 rear quarter seals for Simca Beaulieu Chambord Presidency Marly 2. Cannot be mounted on Ariane, Versailles, Trianon, Marly 1.Quality reproduction conforming to the original

Simca Beaulieu steering wheel delivered lacquered in original color - remanufacturing - standard exchange

Steering wheel for Simca Beaulieu.Refabrication from the original frame, careful and quality production. Delivered painted, without ring or badge. The shipment is made AFTER receipt of your dilapidated copy (chipped plastic, cracked but not ...

€432.00 TTC
(432,00 € HT)

flexible sur mesure type S14 S14 – 500mm

Kit of 3 camshaft rings + installation tool - Renault fregate prairie Goelette engine 671

Kit 3 camshaft bushes and installation tool- Renault Frégate Prairie Goelette engine 671 standard dimension

Set of 8 external valve springs - cast iron cylinder head - Citroen Traction HY U23

Set of 8 external valve springs - cast iron cylinder head - Citroen Traction HY U23

Set of 8 inner valve springs - cast iron cylinder head - Citroen Traction HY U23

Set of 8 inner valve springs - cast iron cylinder head - Citroen Traction HY U23

Custom brake hose D13+7/16e male Long 380mm

Made-to-measure front or rear brake hose. A simple call will allow us to determine your type of hose and its length.Same price as a standard model. Citroen HY, type H, HZ, HW.Image not contractual.

Custom brake hose D13+7/16e male Long 320mm

Made-to-measure front or rear brake hose. A simple call will allow us to determine your type of hose and its length.Same price as a standard model. Citreon HY, type H, HZ, HW.Image not contractual.

Tailor-made brake hose D13+7/16e male Long 400mm

Made-to-measure front or rear brake hose. A simple call will allow us to determine your type of hose and its length.Same price as a standard model. Citreon HY, type H, HZ, HW.Image not contractual.

Air hose connecting air filter - Peugeot 404 injection

Air hose connecting air filter - Peugeot 404 injection

Fuel gauge with float 6V - Traction

" 6 volt float fuel gauge for Traction. "

Joint de culasse pour Citroën B14 G (375/172)

Joint de culasse pour Citroën B14 G (375/172)

Front shock absorber gaiter - Peugeot 404 - series 2

Fuel filler neck - Simca Intendante only

Fuel filler neck - Simca Intendante onlyDima int about 50mm - long 500 mm

Clutch - cable - Citroën HY - from 1969

Clutch cable - Citroen HY - from 1969

Segment set Ø 80 mm Peugeot 203 403 - 8cv - 2x2x4.5

Segment set Ø 80 mm Peugeot 203 403 - 8cv - 2x2x4.5

Sealing plate bearing cap 11CV PERFO - Citroen Traction U23 HY

Sealing plate bearing cap 11CV PERFO - Citroen Traction U23 HY

Axle seal ring 35x68 - Simca Ariane

" Sealing ring axle nose. About 35 x68  mm (non contractual photo) "

Brake line - from 200 to 250 cm

Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.

cFront left brake cylinder - d 31.75 mm - inclined - Panhard Z1

Front left brake cylinder - d 31.75 mm - inclined - Panhard Z1

€126.00 TTC
(105,00 € HT)

Cylindre de frein avant Droit - d 31.75 mm - incliné - Panhard Z1

€126.00 TTC
(105,00 € HT)

Clutch mechanism 3 fingers 10L22 - Renault Prairie Goelette

Clutch mechanism reconditioned, in standard exchange. Fitted on Renault Colorale, Prairie, Goélette, Galion, R2087 and derivativesComplete disassembly, micro balling, surfacing and retaring of the pressure plate.(The sending is done after receipt ...

€504.00 TTC
(420,00 € HT)

SEV JUNIOR igniter head ignition - renault 4cv

SEV JUNIOR igniter head - renault 4cv Dauphine R4 etc.Internal diameter 45mm fixed carbon

Set of 4 relined REAR brake shoes - 4CV

Set of 4 relined brake shoes (Front or Rear) 195 mm x 30 mm in standard exchange for 4 HP.Microblasting, varnish, industrial bonding of friction. Strong adhesion.Eliminates the problem of rivets that could damage the drums.Shipping upon receipt ...

€108.00 TTC
(90,00 € HT)

Front LEFT brake cylinder 22 mm - Renault Dauphine Florida

Front LEFT brake cylinder 22 mm - Renault:Dauphine - Floride - Gordini - OndineR1090 -1091 -1092Ondine from beginning to September 1963

€71.16 TTC
(59,30 € HT)

Front brake cylinder RIGHT 22 mm - Renault Dauphine Floride

Front RIGHT brake cylinder 22 mm - Renault:Dauphine - Floride - Gordini - OndineR1090 -1091 -1092Ondine from beginning to September 1963

€72.00 TTC
(60,00 € HT)

Front LEFT brake cylinder 22 mm - Renault 4CV - feb 56 end of series

Front LEFT brake cylinder 22 mm - Renault 4CV - feb 56 end of series

€71.16 TTC
(59,30 € HT)

Speedometer cable - lower part 175 cm - Citroen HY

Speedometer cable - lower part 175 cm - Citroen HY

Gaskets for water pump 4 outlets - Renault Dauphine

2 Gaskets for 4 outlets water pump - Renault Dauphine

Water pump 4 outlets - Renault Dauphine

Water pump 4 outlets - Renault DauphineDelivered with the pulley with 4 fixing

brass banjo + hollow screw Vedette 1949

various repairs

52 mm galvanized flange or collar exhaust

Flange for exhaust connection (clamp with caliper)

Clutch disc 215mm - PEUGEOT 404

Clutch disc reconditioned, in standard exchange for PEUGEOT 404 and derivates. Complete disassembly, micro balling and painting. (The sending is done after receipt of the used mechanism, not destroyed)(Depending on the year, non-contractual photo)

€114.00 TTC
(95,00 € HT)

Waterproof ring 65 90 12

Spinnaker waterproof ring

Brush set UX 87-88

Set of 2 brushes or carbon brushes for DUCELLIER dynamosRef Ducellier: 581111Assembly on Dynamos Ducellier n °:7562F: Citroën GS - Ami Super7584D: Citroën CX 2000 - 2200 - 2400 - Gti515012A: Citroën CX515008B and 519005B: Savien New original ...

U23 bridge entry seal kit

Exhaust - oval stainless steel silencer (n ° 3) - Simca Versailles

Stainless steel silencer exhaust for V8 Simca Aquilon

€552.24 TTC
(460,20 € HT)

Gearbox oil seal - Renault Fregate TRANSFLUIDE

Gearbox oil seal - Renault Frégate TRANSFLUIDE30x45

Windscreen seal small model - set of 2 - Debut a 63 - Citroen HY

Small windscreen seal - set of 2 - Start at 63 - Citroen HY

Windscreen seal large model 63 and end of series - Citroen HY

Windscreen seal large model 63 and end of series - Citroen HY

Peugeot D3A Rear Hub Kit

Attention non-contractual photo. Kit for 1 rear hub - Peugeot D3A. Includes:2 bearings and a sealed ringKit for a left or right hub

Simca 9 Aronde P60 transmission shaft cross member all models

Simca 9 Aronde P60 transmission shaft cross member all models24x63 mm (attention 2 per vehicle)

Clutch - cable - Citroën HY - unti 1969

Clutch cable - Citroen HY - until 1969

Clutch disc - Citroen B14

Clutch disc Citroen B14.Standard exchange product - reconditioned in France

€164.90 TTC
(137,42 € HT)

Segment set Ø 78 mm Citroen HY 2 x 2.5x4x4 - 4cyl

Segment set Ø 78 mm Citroen Traction 2.5x2.5x4x4 - 4cyl

Spinnaker ring 40 x 57 x 10

Right bearing kit + rear hub spinnaker - Simca 6

Kit composed of:1 x straight bearing1 x waterproof ring (sp)Allows to equip 1 rear hub - Simca 6

Water pump -Citroen HY before 1964

Water pump - Citroen HY with Traction engine - before 1964. Length of the cast iron body 120 mm excluding the axis protrusionIn standard exchange - The pump must be complete and not destroyed.

connecting rod bearing STD - Ø 40 - Simca Aronde RUSH 6cv - 1090 cm3

connecting rod bearing STD - Ø 40 - Simca Aronde RUSH 6cv - 1090 cm3

STD bearing bush - Ø 45.00 - Simca Aronde Ariane 1300 - Flash

STD bearing bush - Ø 45.00 - Simca Aronde Ariane 1300 - Flash

Master cylinder Panhard PL17 assembly Record 04/1962 at the end - DOT

Complete master cylinder for PL17 sedan, utility, Z1 from 04/1962 for a Record type assembly. Includes:For DOT liquid use. Otherwise choose the reference for the 100% SILICONE liquid.- 22mm master cylinder- 3-way 7/16 connection- stop switch- 2 x ...

€142.02 TTC
(118,35 € HT)

Clutch disc 230mm - standard exchange - Ford Vendome - Montecarlo

Disque d'embrayage reconditionné - en échange standard.  

€119.90 TTC
(99,92 € HT)

Water pump belt - Simca 6

Main belt connecting water pump-crankshaft - fan

Segment set Ø 52.4 mm Simca 6 - 2x2x2x3x2 - 4cyl

Segment set Ø 52.40 or 52.50 depending on availability.Cutting clearance to be adjusted before assembly. Non-contractual photo - no return or refund possible.

Segment set Simca 5 - 53.50 mm 2x2x2x3

Set of 16 segments (4 per piston).Composition:Cylinder bore 53.50 mm12 waterproof segments, 2 mm high4 scraper segments 3mm highOther dimensions available, contact us.

Segment set Simca 5 - 53.50 mm 2x2x2x2x3

Set of 20 segments (5 per piston).Composition:Cylinder bore 53.50 mm16 waterproof segments, 2 mm high4 scraper segment height 3mmOther dimensions available, contact us.

Segment set Ø 75 mm Peugeot 203 403 - 7cv - 2.5x2.5x2.5x4.5x4.5

Segment set Ø 75 mm Peugeot 203 403 - 7cv4 x sets each comprising 3 2.5 mm compression rings + 2 4.5 mm oil scraper rings.Non contractual photo

STD segment set 88mm Renault Fregate 3x3x4.5x4.5

Set of 16 segments for 4 pistons Ø 88 mm dimension - 668 or 671 Renault petrol engine.composition per piston:2 x compression in 3 mm2 x scraper in 4.5 mmPossibility of ordering in 85 mm (call us)

Belt 17x969 mm

Belt :Width: 17mmExternal length: 969 mmInternal length: 900 mm

Segment set Ø 58.00 2x2x2x3.5 - Rosengart LR (set of 16)

Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 57.50. Be careful in the event of an error on your part, these products cannot be taken back.- 3 x compression h 2mm- 1 x scraper h 3.5 mmContact us for other ...

valve x 4 - Ø30x8x112 - Simca Aronde Ariane exhaust Rush engine

valve x set of 4 - Ø 30 x 8 x 112 - exhaust - Simca Aronde P60 Ariane Rush engine

Carburateur similaire au type Solex 34 PBIC Traction Citroen et ID 19

Carburateur neuf type Solex 34 PBIC. Prise de dépression sur embase de pied. Configuration pour Citroen Traction - ID 19 Buse 27 - Gicleur principal 140 et ajutage automaticité 165 - Emulsion19 - Ralenti 50 - air ralenti 130 - Pointeau 1.5 - ...

Valves x 4 - ECH Ø 20.5x6x88 - plate 45 ° - Simca 5 - Fiat 500A

Set of 4 ECH valves Ø 20.5x6x88 - plate 45 ° - Simca 5 - Fiat 500A

Valves x 4 - ADM ECH Ø 35x9.5x137.50 - 60 ° - Citroen C4 C6F

Valves x 4 - ADM ECH Ø 35x9.5x137.50 - 60 ° - Citroen C4 C6F

Valves x 4 - ADM ECH Ø 35x9.5x138 - 60 degrees - Citroen C4G C6G

Set of 4 ADM ECH valves Ø 35x9.5x138 - 60 degrees - Citroen C4G C6G

Valves x 4 - ECH Ø 32x9x138 - Citroen P35 - Rosalie

Set of 4 ECH valves Ø 32x9x138 - Citroen P35 - Rosalie

Set of 4 complete pistons - Ø 76.00 mm - Renault Prima 4 and KZ - flat

Set of 4 complete pistons (axles + segments) - axle 18 mm - axle height 51 mm - Piston Ø 76.00 mm - Renault Prima 4 and KZ - flat - Unit price

Piston Ø 70.50 mm - set of 4 complete - Renault Mona 4 - Celta 4

Piston Ø 70.50 mm - Renault Mona 4 - Celta 4 - Set of 4 complete pistons with piston rings and cilps.

Set of 4 complete pistons Ø 63.00 mm - Peugeot 201

Set of 4 complete pistons Ø 63.00 mm - Peugeot 201 - Sold with segments - axle - circlipsAxle Ø 18 mm with notch

Piston x 4 Ø 76.50 mm - Citroen P34 P36 P39 - Rosalie 10 - 15 HP

Piston Ø 76.50 mm - Citroen P34 P36 P39 - Set of 4 - Supplied with segments / pins and clips

Piston x 4 - Ø 72.00 mm - Citroen C4 C4F

Set of 4 pistons Ø 72.00 mm - Citroen C4 C4F

Piston x 4 Ø 68.50 mm - Citroen B2 B12

Set of 4 pistons Ø 68.50 mm - Citroen B2 B12. Sold with segments - pins - circlips. segments 2.2 x 2.5 x 3.5 x 3.5

Complete pistons - set of 4 - Ø 68.50 mm - Shaft Ø 22 - Simca Aronde P60 Etoile 6cv

Set of 4 piston Ø 68.50 mm - Simca Rush Etoile 6cv - Axle Ø 22 mmAttention also exists in axis Ø 20 mm, available on this Shop

Complete pistons - set of 4 - Ø 68.00 mm - Simca Rush Etoile 6cv

Set of 4 piston Ø 68.00 mm - Simca Rush Etoile 6cv - Axle Ø 22 mm

Complete pistons - set of 4 - Ø 74.00 mm - Simca Aronde P60 ARIANE - Flash and Rush engine

Complete pistons - set of 4 - Ø 74.00 mm - Simca Aronde P60 ARIANE - Flash and Rush engine

Complete pistons - set of 4 - Ø 72.50 mm - Simca

set of 4 piston Ø 72.50 mm - Simca.

Piston x 4 Ø 85.00 mm - Renault engine 603 - lateral - 4 cylinders

set of 4 piston Ø 85.00 mm - Renault lateral motor 603

Segment set Ø 54.50 mm Renault 4cv Ø 2cx2x2x3.5R

Segment set Ø 54.50 mm Renault 4cv Ø 2cx2x2x3.5R

Pistons liners kit Ø 54.50 base 60 Renault 680.01 and -02 - 747 CM3 4CV

Pistons liners kit Ø54.50 base 60 Renault 680.01 and -02 - 747 CM3 4CV

liner Ø 63 semi finished int 62.5 - Peugeot 201

liner Ø 63 mm delivered semi finished in Ø 62.50 - long 180 mm - Ø 67 - collar Ø 68 - High collar 6 mm - Peugeot 201 - sold individually

Set of 4 relined rear brake shoes for Peugeot D3 D4

Set of 4 rear brake shoes, 46 mm wide. relined in standard exchange for Peugeot D3 D3A D3B ... D4 D4A D4B etc. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets that could damage the drums. ...

€156.00 TTC
(130,00 € HT)

Peugeot D4 rear hub kit

Attention non-contractual photo. Kit for 1 rear hub Peugeot D4B (check that your bearing dimensions correspond to those indicated)Includes:1 x 20x52 double row bearing1 x bearing 17x471 x waterproof ringKit for one side

Mechanism clutch Peugeot D3 D4

Clutch mechanism reconditioned, in standard exchange. Mounted on Peugeot D3 D4, etc ...Complete disassembly, micro balling, surfacing and retaring of the pressure plate.(The sending is done after receipt of the used mechanism, not destroyed - ...

€276.00 TTC
(230,00 € HT)

Renault engine connecting rod bearingsFregate dimension 0.25 - 51.75 mm

Set of 8 connecting rod bearings dimension 0.25 crankpin d 51.75 mm - Fregate engine 668 - 11cv - 2L

Segment set Simca 5 - 52 mm (4 sealed / 1 scraper)

Set of 20 segments (5 per piston).Composition:Cylinder bore 52.50 mm16 waterproof segments, 2 mm high4 scraper segment height 3mmOther dimensions available, contact us.

Rear brake cylinder kit 28.5 mm CItroen U23

Repair kit for 1 rear wheel cylinder 28.5 mm includes:Kit for one cylinder.

€43.32 TTC
(36,10 € HT)

STD segment set 88mm Renault Fregate 2x2x2x4.5

Set of 16 segments for 4 pistons Ø 88 mm dimension - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 2 mm1 x scraper in 4.5 mmPossibility to order in 85 mm (contact us)

Ford Anglia 105 106 E carbon brush set

Carbon brush set for Ford Anglia 105 and 106 E starter (997 cc engine)

Set of 8 pistons 67.50 Ford Vedette

Set of 8 pistons - New manufacture, similar to the original model - reduction in piston mass (approximately 255 gr with rings) - molybdenum treatment - cylinder size 67.50 mm. Supplied with segments, pins and circlips - The segments supplied are ...

Bearings for Simca Versailles Chambord 020 - 52.79 mm

Set of bearings for Simca Versailles, Chambord, Ariane 8 etc. V8 "Aquilon" engine.(1 rear bearing + 2 front and central single bearings)Dimension: 020 US (0.50 mm)

Set of 4 front brake shoes Mercedes 190 SL

Set of 4 front brake shoes in standard exchange. (Send us your set before shipping the new one)High performance friction, applied by industrial bonding, no more rivets damaging the drums. Micro blunt brake shoes.(Non contractual photo)

€139.20 TTC
(116,00 € HT)

Maître cylindre asymétrique 38.1 mm Citroen U23

Maître cylindre piston d 38.1 mm (1'1/2). Fixation 3 trous asymétriques.  longeur 210 mm. Se monte sur Citroen U23 suivant version. Attention stock très réduit, nous consulter avant commande svp.

€288.00 TTC
(240,00 € HT)

Lower hose Renault SG2 TP3

Lower hose for Renault SG2. Long dimension approx. 270 mm, short side 160 mm, diam 35 mm approx

Citroën traction mechanism clutch

Clutch mechanism reconditioned, in standard exchange mounted on Citroën Traction engine, Type H, HY, U23 and derivatives. Complete disassembly, micro balling, surfacing and retaring of the pressure plate. p > (The sending is done after ...

€396.00 TTC
(330,00 € HT)

Exhaust - outlet tube + stainless steel stock - Ford Vendome - MONTE CARLO

"Outlet tube with bracket (passage of the bridge) to be connected to the outlet of the silencer. Ford Vendôme and Monte Carlo.All stainless steel."

€372.00 TTC
(310,00 € HT)

Segment set Ø 57.50 2x2x3.5x3.5 - Rosengart LR (set of 16)

" Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 and derivatives. Bore 57.50 - 2 x compression h 2mm - 2 x scraper h 3.5 mm Contact us for other dimensions. "

Front steering axle waterproof ring - 4x4 - Renault Colorale

" Waterproof ring (oil seal) for articulation (" "ball" ") located in the front steering bridge. 2 per vehicle. "

silent block pulling Renault Colorale Prairie

Silent block for tie rod. Fitted only on Renault Colorale 4x4 version 11cv. 8 per vehicle. Dimensions: d int 18 x D ext 34 mm L ext 65 mm x L int 71 mm

joint lunette arriere Ford Anglia

joint pare brise Anglia

Ford Anglia capacitor ignition

Capacitor for Lucas igniter.

Remise en état lot de pièces spécifiques

segment set 85 mm 2x2x2x4x4 Renault Fregate

Set of 20 segments for 4 eyebolts dimension 85 mm - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 2 mm2 x scraper in 4 mmPossibility of ordering in 85 mm (call us)

copy of Oil pressure contact mano - Ford Vedette 1949 - 54

oil pressure switch for Ford Vedette engine from 1949 to 1954 - Thread M 10x100

copy of Set of segments STD 85.50, oversize 0.50 mm Renault Fregate

Set of 16 segments for 4 pistons, special dimension 85.50 mm reaming - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 3 mm2 x scraper in 4.5 mmPossibility of ordering in 85 mm (call us)

Clutch thrust ball bearing for 3-latch mechanism - Traction Citroen

Bearing for clutch release associated with the 3-latch mechanism and heavy plate.(Depending on year, non-contractual photo)

€90.00 TTC
(75,00 € HT)

copy of Waterproof swivel joint - Cyclam for Citroen Traction HY U23 water pump

Waterproof rotating joint - Cyclam for CItroen Traction HY U23 water pump - for Ø 15 mm shaftAttention, check the possibility of mounting for an old pump fitted with a stuffing box

Set of 4 relined rear brake shoes - FIAT 508 Ballila

Set of 4 relined brake shoes (Fr) standard exchange. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets which can damage the drums.Shipping upon receipt of worn parts.

€96.00 TTC
(80,00 € HT)

Set of 4 relined rear brake shoes - FIAT 508 Ballila

Set of 4 relined brake shoes (AR) for Fiat ballila in standard exchange. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets which can damage the drums.Shipping upon receipt of worn parts.

€96.00 TTC
(80,00 € HT)

copy of Inclined banjo + hollow screw + 2 joints for connection on Simca 6 cylinder

Inclined banjo with 17mm inlet (11 / 16th) + 7 / 16th hollow screw + 2 seals for Simca 6 cylinder liquid inlet connection

€33.60 TTC
(28,00 € HT)

Axle 8.5 mm Ø repair - without butterfly - Solex 32 PBIC or similarsimilar

Shaft dimension repair 8.5 mm without butterfly for repair carburettor Solex 32 PBIC or similarOverall length 91.5 mm

copy of Rear brake hose 140 mm Citroen Traction

Rear brake hose 140 mm long. Traction 7.11 and 15hp.

Jeu 12 segments compression ep 2.5mm + 4 racleur ep 4mm - D 70 mm