Front brake cylinder 31.75 mm - SAMBRON
Front brake cylinder - Ø 31.75 mm - Sambron
(69,50 € HT)
Adapter connection 7/16 male - 3/8 female
Adaptateur freinage mâle 7/16 (envion 11mm) femelle 3/8
(17,50 € HT)
Master cylinder kit 38.1 mm - Renault Galion
Repair kit for 38.1 mm master cylinder.
(74,75 € HT)
Brake cylinder 28.5mm - entry 11mm (7/16th) - Peugeot Q3A
Brake cylinder 28.5mm - entry 11mm (7/16th) -
(65,00 € HT)
Remise en état lot de pièces spécifiques
(90,00 € HT)
segment set 85 mm 2x2x2x4x4 Renault Fregate
Set of 20 segments for 4 eyebolts dimension 85 mm - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 2 mm2 x scraper in 4 mmPossibility of ordering in 85 mm (call us)
(138,00 € HT)
copy of Oil pressure contact mano - Ford Vedette 1949 - 54
oil pressure switch for Ford Vedette engine from 1949 to 1954 - Thread M 10x100
(10,50 € HT)
Best Sellers
Ignition capacitor 6, 12 and 24V
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Rear brake cylinder 28.57 mm - 1 1/8 Renault Colorale, Prairie, R2087, Goelette
" Rear wheel cylinder. Diam: 1" "1/8 or 28.6 mm. Liquid inlet diameter = 11.4 mm (1/2 20 f / p) Renault Colorale, Prairie, R2087, Goélette, 1000 kg, 1400 Kg and derivatives . "
(75,35 € HT)
Front brake cylinder kit 34.9 mm - 1 3/8 Renault Prairie R2087 Goelette
Repair kit for AV cylinder. d 34.93 mm
(16,00 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,35 € HT)
Ignition - 4 x Spark plugs for Renault Fregate
Set of 4 NGK spark plugs with std base (14 mm), Renault Fregate, Colorale, Prairie engine (side engine 603 and tumbled 668 or 671), R2087, Goélette, Galion, SG2 gasoline (engine 671 or 817) etc. Compatible with SP95 and SP98 fuels
(20,00 € HT)
Best sellers There are 1559 products.
Set of 4 front jaws Ford Vedette
" Set of 4 front brake shoes in standard exchange. (Send us your set before shipping the new one) High performance friction, applied by industrial bonding, no more rivets which damage the drums. Pickled and varnished jaws. (non contractual photo) "
(110,00 € HT)
Complete master cylinder Simca 8 1200 and sport
Master cylinder complete with bellows. Internal diameter 25.4 mm
(108,00 € HT)
Master cylinder - Beginning to Nov 57 - Simca Utility 500 kg
Master cylinder, supplied complete with 25.4 mm bellows.Master cylinder - Beginning to Nov 57 - Simca Aronde Utility 500 kg
(108,00 € HT)
Master cylinder from start to dec / 59 - Simca 9 and Aronde
Master cylinder, supplied complete with 25.4mm bellows.For Simca 9 and Aronde until dec 1959
(108,00 € HT)
Front hub kit - Ford Vedette - Vendome
Front wheel hub kit. Includes:- 1 internal conical bearing- 1 external conical bearingThe set is valid for one front wheel.
(108,00 € HT)
Complete master cylinder Simca 6- Fiat Balilla
Master cylinder complete with bellows. Inner diameter 25.4 mm
(108,00 € HT)
Master cylinder 25.4 mm - Ford Vedette 1949
Master cylinder, supplied complete with 25.4 mm bellows.Mounts on Ford Vedette 1949 (only)
(108,00 € HT)
Connecting rod bearings set - Peugeot 203 - 403 standard dimension
Set of bearings for 4 Peugeot 203 and 403 connecting rods. Standard original dimension. French manufacture.
(135,00 € HT)
Segments set - 64 mm - 2x2x2x3.5x3.5 - Peugeot 201
Set of 20 segments (5 per piston).Composition:Cylinder bore 64 mm12 waterproof segments, 2 mm high8 scraper segment height 3.5 mmOther dimensions available, contact us.
(107,00 € HT)
Plate equipped for front left or right turn signal - Ford Vedette
Plate fitted for front left or right turn signal - Ford VedetteSupplied with the cork gasket, sockets with wires.Delivered without lamp.
(128,00 € HT)
Steering wheel center - badge - Simca Versailles Chambord
Steering wheel center - badge - Careful re-manufacture - Simca Versailles Chambord
(128,00 € HT)
LEFT 28.5mm rear brake cylinder - Renault SG2 - 1965 to the end
LEFT REAR brake cylinder for single or double circuit, from 1965 to end of series.
(106,25 € HT)
RIGHT rear brake cylinder 28.5mm - Renault SG2 - 1965 to the end
RIGHT REAR brake cylinder for single or double circuit, from 1965 to end of series.
(106,25 € HT)
Set of 4 relined front brake shoes Simca 1300
Set of 4 relined brake shoes (AV) for Simca 1300 in standard exchange. Bead blasting, varnish, industrial friction bonding. Strong adhesion. Eliminates the problem of rivets that can damage drums.Shipping upon receipt of worn parts.
(106,00 € HT)
Valves x 4 - ECH Ø 33.8x9x103 - Citroen Traction 11 perfo - HY Perfo engine - U23 flat wings
Set of 4 ECH valves Ø 33.8x9x103 - Citroen Traction 11 perfo - HY Perfo engine 1955 to 63 - U23 flat wings
(105,88 € HT)
cFront left brake cylinder - d 31.75 mm - inclined - Panhard Z1
Front left brake cylinder - d 31.75 mm - inclined - Panhard Z1
(105,00 € HT)
Cylindre de frein avant Droit - d 31.75 mm - incliné - Panhard Z1
(105,00 € HT)
Cable kit with 12V starter relay - Citroen HY
(105,00 € HT)
Front brake cylinders x 2 - cone protruding 28.5mm- Simca Aronde 500 kg - start at 11/57
Pair of front wheel cylinders L and R - d 28.57 mm. 3/8 inlet - protruding cone - Left mounting. Length 72 mm - inside liquid passage = 8.5 mm. Assembly:- Simca utility 500 kg from start to 11/57
(105,00 € HT)
Front brake cylinders x 2 - cone protruding 28.5mm - Simca Aronde Jan 53 to Nov 57
Pair of front wheel cylinders L and R - d 28.57 mm. 3/8 inlet - protruding cone - Left mounting. Length 72 mm - inside liquid passage = 8.5 mm. Assembly:- Simca 9 1200 from 53 to end of series,- Simca Aronde from Jan 53 to Nov 57.
(105,00 € HT)
Set of 4 rear brake shoes HY or type H Citroen
Set of 4 rear brake shoes - standard exchange. (Send us your game before shipping the new one). High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes.
(105,00 € HT)
Front hub bearings kit - Citroen U23
Front hub bearings kit - Citroen U23. Includes:1 conical bearing 38x76 mm1 tapered bearing 24.57 mm1 waterproof ring 50x76This kit allows you to equip a wheel
(104,50 € HT)
High engine gaskets kit - Simca 9 - 1221 cm3 engine
TOP ENGINE gaskets kit with cylinder head gasket for Aronde Simca 9 - 1221 cm3 engine.Non contractual photo. Not suitable for FLash or RUSH engines.
(104,47 € HT)
rear brake cylinder 38.1mm - citroen U23
Rear brake cylinder d 38.10 mm. French made
(103,70 € HT)
Segment clearance Ø 72 mm - 2.5 x 2.5 x 2.5 x 5 - Simca 9 - Aronde
Set of 16 segments for 4 pistons dimension Ø 72 mm - Simca 9 or Aronde enginecomposition per plunger:4 x fire segment 2.5 mm4 x compression in 2.5 mm4 x compression in 2.5 mm4 x scraper in 5 mmPossibility to order in 85 mm (call us) - ...
(103,00 € HT)
Segment clearance Ø 72 mm - 2.5 x 2.5 x 3 x 4 - Simca 9 - Aronde
Set of 16 segments for 4 pistons dimension Ø 72 mm - Simca 9 or Aronde enginecomposition per plunger:4 x fire segment 2.5 mm4 x compression in 2.5 mm4 x compression in 3 mm4 x scraper in 4 mmPossibility to order in 85 mm (call us) - ...
(103,00 € HT)
Valves x 4 - ECH Ø 32x8x124.7 - Peugeot 201 M D C and E
Set of 4 ECH valves Ø 32x8x124.7 - Peugeot 201 M D C and E
(103,00 € HT)
Valves x 4 - ADM Ø 33x8x124 - Peugeot 201 M D C and E
Set of 4 ADM valves Ø 33x8x124 - Peugeot 201 M D C and E
(103,00 € HT)
Valves x 4 - ADM ECH Ø 32x9x129.7 - Citroen B2 B12 B14
Set of 4 ADM ECH valves Ø 32x9x129.7 - Citroen B2 B12 B14
(102,40 € HT)
Exhaust - stainless steel primary tube (n ° 2) - Simca Versailles
Primary tube between the "Y" and the silencer - Part 2 on the photoAll stainless steel.
(108,22 € HT)
Modification usinage 4 x pistons Ø 85.00
(102,00 € HT)
Segment set Ø 74 mm Simca 2.5x2.5x2.5x4 - 4cyl
Segment set Ø 74 mm Simca 2.5x2.5x2.5x4 - 4cyl
(100,95 € HT)
windscreen (front) - Simca 9 Aronde
Windshield seal - Simca 9 Aronde(Does not fit P60)
(100,00 € HT)
various repairs
(100,00 € HT)
set of 2 Peugeot D3 D4 windscreen seals
Set of 2 windscreen gaskets for Peugeot D3 or D4.
(100,00 € HT)
Set of 2 engine mounts Simca Versailles - Chambord - ARIANE 8 cylinders
Set of 2 engine mounts for V8 Simca.Mounts on Trianon, Versailles, Régence, Beaulieu, Chambord, Présidence, Marly, Ariane 8.
(100,00 € HT)
Set of 4 Rosengart brake shoes
Set of 4 relined brake shoes, in standard exchange. (Send us your set before shipping the new one) High performance friction, applied by industrial bonding, no more rivets which damage the drums. Micro blunt brake shoes.
(100,00 € HT)
Front brake cylinder 38.1 mm - SUMB Marmon
For Simca SUMB Marmon and other heavy-duty derivatives.Complete front wheel cylinder d 38mm.
(99,85 € HT)
Ignition - complete igniter with vacuum - M48
Complete igniter with vacuum capsule AND centrifugal advance - similar curve Ducellier M48 - maximum advance 12 ° on igniter - delivered tested and greased. Dimensions :- length between shoulder (stop under the body) and end of trainer: 64mm- ...
(99,50 € HT)
Sedis belt injection pump 404 and 504 Peugeot
Sedis 404 and 504 Peugeot injection pump belt. High quality manufacturing.
(99,17 € HT)
Piston ring set Ø 78 mm Citroen Traction U23 HY 2.5x2.5x4x4 - 4 cyl
Piston ring set Ø 78 mm Citroen Traction U23 HY 2.5x2.5x4x4 - 4 cyl
(99,00 € HT)
set of 2 Rear window gaskets - Peugeot D3 D4
Set of 2 windscreen gaskets for Peugeot D3 or D4.
(98,78 € HT)
Valves x 4 - ADM Ø 37x9x138 - Citroen P34 P36 10cv
Set of 4 ADM valves Ø 37x9x138 - Citroen P34 P36 10cv
(98,50 € HT)
Valves x 4 - ECH Ø 35x9x138 domed - Citroen P34 P36 10cv
Set of 4 ECH valves Ø 35x9x138 convex - Citroen P34 P36 10cv
(98,50 € HT)
Set of 4 relined REAR brake shoes - Panhard
Set of 4 relined brake shoes (front or rear) 195 mm x 30 mm in standard exchange for Panhard Dyna X86, Dyna Z, PL 17 and series 24Microblasting, varnish, industrial bonding of friction. Strong adhesion.Eliminates the problem of rivets that could ...
(98,00 € HT)
Seals of the 2 rear doors - Peugeot D3 D4
Seals of the 2 rear doors - Peugeot D3 D4.Product sold in one length. To be cut according to the length of each door.
(98,00 € HT)
Front hub kit - Simca Ariane - 2nd version (similar to Chambord 61)
Front hub repair kit with D 20mm spindle, for Ariane, Beaulieu, Chambord, Présidence and Marly 2 model 61.1 outer conical bearing1 internal tapered bearing1 sealed ringValid for one wheel. Attention do not fit on model 1958 to 60 with rocket D 19 ...
(98,00 € HT)
Brake master cylinder Ø 31.75 mm - Peugeot 404 Thermostable
Brake master cylinder Ø 31.75 mm - Peugeot 404 Thermostable
(98,00 € HT)
Simca 9 Aronde P60 transmission shaft cross member all models
Simca 9 Aronde P60 transmission shaft cross member all models24x63 mm (attention 2 per vehicle)
(98,00 € HT)
Front hub kit - Simca Ariane - 1st version
Front wheel hub kit. Includes 3 pieces:- 1 internal tapered bearing- 1 external tapered bearing- 1 waterproof ringThe set is valid for one front wheel.
(98,00 € HT)
Peugeot 403 front hub kit
Set for repairing the Peugeot 403 front hub. Please check the sizes before orderingIncludes:1 bearing 30x621 bearing 20x521 sealing ringKit for a single hub. It is advisable to replace the 2 hub kits on the same axle
(98,00 € HT)
Set of 4 relined brake shoes Panhard Dyna x86
Set of 4 relined brake shoes (front or rear) 195 mm x 30 mm in standard exchange for Panhard Dyna X86, Dyna Z, PL 17 and series 24Microblasting, varnish, industrial bonding of friction. Strong adhesion.Eliminates the problem of rivets that could ...
(98,00 € HT)
Rosengart crankshaft rear bearing
Roller bearing, rear crankshaft bearing assembly (flywheel side) for LR2, LR4, LR4N2 engines and derivatives.
(98,00 € HT)
Silent block rear suspension blades (for two sizes) - Simca Ariane
Set of 12 silent blocks to renovate the two sets of rear suspension blades. (includes 8 long and 4 short)Quality manufacturing in Nitrile, shore life 70, casting with a pressure steel mold (no inclusion).The price allows to equip a vehicle. ...
(117,40 € HT)
Silent block rear suspension blades (for two sides) - Simca Versailles Chambord
Set of 12 silent blocks to renovate the two sets of rear suspension blades. (includes 4 long and 8 short)Quality manufacturing in Nitrile, shore life 70, casting with a pressure steel mold (no inclusion).The price allows to equip a vehicle. ...
(117,40 € HT)
Peugeot 203 front hub kit - 2nd generation
Kit for 1 front hub Peugeot 203 - 2nd generation including 2 bearings and a sealing ring - brand bearings (no remanufacturing unknown)Dim 20 x 52 width 15 mmDim 30 x 62 width 16 mmWarning: check that these dimensions correspond to your generation ...
(96,50 € HT)
Rear window rubber - Simca 9 Aronde
Rear window seal - Simca 9 Aronde(Does not fit P60)
(96,00 € HT)
Peugeot 403 engine gaskets kit - 8 hp
Engine gaskets kit for Peugeot 403 - 8 hp - 80 mm boreHead gasket and base gaskets included.
(96,00 € HT)
side shim set bearing - Simca Aronde Ariane RUSH 6 and 7 hp engine
side shim set bearing - Simca Aronde Ariane RUSH 6 and 7 hp engine larg : 2.335 mm - original size
(96,00 € HT)
Valves x 4 - ADM Ø 35x8.5x121.7 45 ° - Peugeot 203
Set of 4 ADM valves Ø 35x8.5x121.7 angle 45 ° - Peugeot 203
(96,00 € HT)
Valves x 4 - ECH Ø 32.5x8.5x115.9 - Peugeot 203 - 403
Valves x 4 - ECH Ø 32.5x8.5x115.9 - Peugeot 203 - 403
(109,50 € HT)
Tapered bearings kit + front hub spinnaker - Simca 6
Kit composed of:2 x tapered bearings1 x waterproof ring (sp)Allows to equip 1 front hub - Simca 6
(95,67 € HT)
Clutch disc 215mm - PEUGEOT 404
Clutch disc reconditioned, in standard exchange for PEUGEOT 404 and derivates. Complete disassembly, micro balling and painting. (The sending is done after receipt of the used mechanism, not destroyed)(Depending on the year, non-contractual photo)
(95,00 € HT)
Peugeot 403 rear brake shoe set - 35 mm
Set of 4 rear brake shoes relined, in standard exchange. Peugeot 403 assembly. (Send us your set before shipping the new one)High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished ...
(95,00 € HT)
Windscreen seal Renault Prairie Colorale Goélette Galion
Windscreen seal for Renault Prairie Colorale, Goélette, Galion, R2065, R2066 and derivatives. Length 4 ml, can be cut to the size of your model (with a cuter)
(95,00 € HT)
Windscreen seal Ford Vedette 1953/54
Welded windscreen seal - without central upright - for Vedette 1953 and 54. Non-contractual photo
(95,00 € HT)
Segments set Ø 72 mm Citroen Traction U23 HY 2x2.5x5 - 4cyl
Piston ring set Ø 72 mm Citroen Traction 2 x 2.5 x 5 - 4 cyl
(94,50 € HT)
piston ring set Ø 78 mm Citroen Traction U23 HY 2x2.5x5 - 4cyl
Segment set Ø 78 mm Citroen Traction 2x2.5x5 - 4cyl
(94,50 € HT)
Renault Fregate disc clutch
Clutch disc reconditioned, in Renault Frégate standard exchange. Complete disassembly, micro balling and painting.The sending is done after receipt of the used mechanism, not destroyed(Depending on the year, non-contractual photo) (Suivant année, ...
(94,50 € HT)
Set of 4 rear brake shoes - Simca 9 - Aronde P60
Set of 4 rear brake shoes relined, in standard exchange for Simca 9 - Aronde - P60 - any model (non-contractual photo). High performance friction, excellent grip, applied by industrial bonding, elimination of rivets which damage the drums. ...
(94,00 € HT)
Set of 4 front brake shoes Simca Aronde P60 (standard exchange)
Set of 4 relined front brake shoes, in standard exchange for Simca 9 - Aronde - P60 - any model (non-contractual photo). High performance friction, excellent grip, applied by industrial bonding, elimination of rivets which damage the drums. ...
(94,00 € HT)
Set of 4 relined rear brake shoes Simca Ariane
Set of 4 relined brake shoes (Ar) for Simca Ariane 4 or Ariane 8 - in standard exchange. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets which can damage the drums.Shipping upon receipt of ...
(93,33 € HT)
Set of 4 relined rear brake shoes Simca 8 brake
Set of 4 relined brake shoes (AR) for Simca 8 in standard exchange. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets which can damage the drums.Shipping upon receipt of worn parts.
(93,33 € HT)
Set of 4 relined rear brake shoes Simca Versailles
Set of 4 relined brake shoes (AR) for Simca V8 in standard exchange. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets which can damage the drums.Shipping upon receipt of worn parts.
(93,33 € HT)
Set of 4 relined front brake shoes Simca Ariane
Set of 4 relined brake shoes (Front) for Simca Ariane 4 or Ariane 8 - in standard exchange. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets which can damage the drums.Shipping upon receipt ...
(93,33 € HT)
Set of 4 Ford Anglia rear brake shoes
Set of 4 rear brake shoes as standard exchange. Ford Anglia 105 and 106 E. Shipping takes place after receipt of your worn brake shoes.
(93,33 € HT)
Brake master cylinder - Ø 28.5 mm Peugeot D4 - 11/57 to end
Brake master cylinder Ø 28.5mm, Peugeot D4 D4A D4B - 11/57 to end. Non contractual photo.
(93,00 € HT)
Clutch disc 180mm - Simca 9 Aronde P60 Standard Exchange
Clutch disc reconditioned, in standard exchange. Complete disassembly, micro-blasting and painting. (The sending is done after receipt of the used mechanism, not destroyed)(Depending on the year, non-contractual photo)
(92,25 € HT)
Set of 4 Ford Anglia front brake shoes
Set of 4 front brake shoes in standard exchange. Ford Anglia 105 and 106 E. Shipping takes place after receipt of your worn brake shoes.
(92,00 € HT)
Seals the kit for 4 doors and sills - Peugeot 203 sedan 4p
Kit comprising: - angled seal for the 4 doors - pillar seal for the 4 doors Peugeot 203 sedan - door sill seal For 203 Peugeot sedan
(91,67 € HT)
Citroen traction disc clutch
Clutch disc reconditioned, in standard exchange Traction, type H, HY, U23 and derivatives. Complete disassembly, micro balling and painting. (The sending is done after receipt of the used mechanism, not destroyed)(Depending on the year, ...
(110,00 € HT)
Jeu 12 segments compression ep 2.5mm + 4 racleur ep 4mm - D 70 mm
(91,00 € HT)
Remise en état lot de pièces spécifiques
(90,00 € HT)
Cable passage vitesses pour SImca Aronde P60 à partir de 06/1960
(90,00 € HT)
Set of 13 cylinder head bolts 10x102x24 Perfo engine - Citroen Traction U23 HY
Set of 13 cylinder head screws 10x102x24 Perfo engine - Citroen Traction U23 HY
(90,00 € HT)
Rear suspension arm repair kit - Citroen HY
Includes:- 1 x bearing 40 x 80 mm- 1 x bearing 55 x 100 mm- 2 x waterproof ringsThis kit is intended for a rear suspension arm - Citroen HY
(90,00 € HT)
Set of 4 relined REAR brake shoes - 4CV
Set of 4 relined brake shoes (Front or Rear) 195 mm x 30 mm in standard exchange for 4 HP.Microblasting, varnish, industrial bonding of friction. Strong adhesion.Eliminates the problem of rivets that could damage the drums.Shipping upon receipt ...
(90,00 € HT)
Flector transmission - Simca 9 dovetail P60 all models
Flector transmission - Simca 9 dovetail P60 all models
(90,00 € HT)
black sheet metal protection seal - 18 ml
(90,00 € HT)
Segment set Ø 54.50 mm Renault 4cv Ø 2cx2x2x3.5R
Segment set Ø 54.50 mm Renault 4cv Ø 2cx2x2x3.5R
(90,00 € HT)
Segment set Ø 54.50 mm Renault 4cv Ø 2cx2x3.5R
Segment set Ø 54.50 mm Renault 4cv Ø 2cx2x3.5R
(90,00 € HT)
Simca 5 rear brake shoe set 4
Set of 4 rear brake shoes in standard exchange. (Send us your game before shipping the new one)High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished jaws.
(90,00 € HT)
Simca 5 front brake shoe set 4
Set of 4 refurbished front brake shoes, in standard exchange (Send us your set before shipping the new one).High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes.(Non ...
(90,00 € HT)
Set of 4 rear brake shoes Simca 6
Set of 4 rear brake shoes relined, in standard exchange for Simca 6 (non contractual photo). High performance friction, excellent grip, applied by industrial bonding, elimination of rivets which damage the drums. Pickled and varnished brake ...
(90,00 € HT)
Set of 4 front brake shoes Simca 6
Set of 4 relined front brake shoes, in standard exchange for Simca 6 (non-contractual photo). High performance friction, excellent grip, applied by industrial bonding, elimination of rivets which damage the drums. Pickled and varnished brake ...
(90,00 € HT)
Valves x 4 - ECH Ø 34x9x112.7 - Citroen Traction 11D
Set of 4 ECH valves Ø 34x9x112.7 - Citroen Traction 11D
(89,96 € HT)
Valves x 4 - ADM Ø 37x8.5x116.4 - Peugeot 203 - 403
Set of 4 ADM valves Ø 37x8.5x116.4 - Peugeot 203 - 403
(116,67 € HT)
Valves x 4 - ECH Ø 32x9x138 - Citroen P35 - Rosalie
Set of 4 ECH valves Ø 32x9x138 - Citroen P35 - Rosalie
(89,00 € HT)
8 x sealed segments 53.50 mm thick 2mm + 4 x scraper segments without spring in 54.00 3mm thick
8 x sealed segments 53.50 mm thick 2mm + 4 x scraper segments without spring in 54.00 3mm thick
(88,50 € HT)
Brake line - from 150 to 200 cm
Brake line re-manufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original end pieces)Shipping after receiving your model.
(88,00 € HT)
Valves x 4 - ADM Ø 37x9x109 - plate - Citroen Traction 11D
Set of 4 ADM valves Ø 37x9x109 - flat - Citroen Traction 11D
(88,00 € HT)
Seal 4 doors Ford Vedette Comete Vendome
Set of 4 door seals for Ford Vedette, Comète, Vendôme etc.
(88,00 € HT)