STD segment set 88mm Renault Fregate 2x2x2x4.5

Set of 16 segments for 4 pistons Ø 88 mm dimension - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 2 mm1 x scraper in 4.5 mmPossibility to order in 85 mm (contact us)

STD segment set 85 mm 3x3x3x4.5 Renault Fregate

Set of 16 segments for 4 eyebolts dimension 85 mm - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 3 mm1 x scraper in 4.5 mmPossibility of ordering in 85 mm (call us)

STD connecting rod bearings - Ø 40mm - Simca 8 - 1200 cm3

connecting rod bearing STD - Ø 40mm - Simca 8 - 1200 cm3

STD bearing bush - Ø 47.87 - Simca Aronde Ariane RUSH 6 and 7 hp

Set of bearing bearings for crankshaft dimension STD - Ø 47.87 mmMounts on engine type 312 -316 -FLASH - RUSH 7CV - RUSH SUPER MFor vehicle:- Dovetail motor RUSH 6 or 7hp,- Ariane with RUSH and RUSH Super M engines,- SIMCA 1300 and 1301

STD bearing bush - Ø 45.00 - Simca Aronde Ariane 1300 - Flash

STD bearing bush - Ø 45.00 - Simca Aronde Ariane 1300 - Flash

STD bearing bush - Simca 9 - Aronde - 1951-568 - 1200 cm3

STD bearing bush - Simca 9 - Aronde - 1951-568 - 1200 cm3

Standard 6V coil ignition

Branded ignition coil guaranteed for use with 6 V platinum-plated igniter (breakers). Impedance respected to prevent the breakers from becoming blue. Also works perfectly with electronic module or integral electronic igniter.

Stainless steel silencer - Citroën HY

Stainless steel screw-on interior mirror

rearview mirror

Stainless steel cylinder head tube Citroen Traction - HY - U23

Water tube for cooling cast iron cylinder head. Citroen Traction, HY, U23 and derivativesStainless steel construction

Stainless steel - cylinder head water tube - Renault Fregate, Prairie, R2087, Goelette

" Internal water pipe for cylinder head. Engine type 668, 671 (11 and 12hp), 817 (sg2 petrol) etc. Manufactured in stainless steel to eliminate corrossion problems. Supplied with assembly diagram. "

Stainless heating steel T hose for Ford Vedette

Stainless steel T allowing the heating return to be connected to the lower main radiator hose. Ford Vedette, Vendôme or other vehicle using this system.

Springs - set of 8 for front brake - Citroen HY - type H

Springs - set of 8 for front brake - Citroen HY - type HSet for 2 front wheels

Spinnaker seal ring 38x73 - Simca Versailles Chambord

" Sealing ring on bridge nose. Supplied with adapter ring. About 38 x 73 mm (non contractual photo) "

Spinnaker ring on 1/2 rear shaft - Ford Vedette - Comete

Spinnaker ring on 1/2 rear shaft - Ford Vedette - Comete(to be mounted on the left and right side)

Spinnaker ring 40 x 57 x 10

Spinnaker ring - the complete kit for Simca Versailles Chambord gearbox

Set of 4 rings for input, output and gearbox lever Simca Versailles Chambord

Spinnaker nose ring 38x78 special - Simca Marly

Sealing ring on bridge nose. Supplied with adapter ring.Special model for Simca MArlyApprox.38 x 78mm(Non contractual photo)

Speedometer cable - speedometer side 60 cm - Citroen HY

Speedometer cable - upper part 60 cm - Citroen HY

Speedometer cable - Peugeot 203 - all models

Speedometer cable for Peugeot 203 convertible, sedan, commercial pick-up, all models (Non-contractual photo)

Speedometer cable - lower part 175 cm - Citroen HY

Speedometer cable - lower part 175 cm - Citroen HY

Special brake grease tube - Plastilub ATE - 75 ml

Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!

Special brake grease tube - 5g

Tube of special braking grease (5gr), Lockheed DOT and silicone compatible, protects steel cylinder and piston parts, helps them slide, compatible with rubber parts.

Spark plug Motorcraft BRF 22 C x 4

4 x Motocraft AG 252 spark plugs-Ford Scorpio / Granada / Sierra ..See list on photos

Spark plug ignition with 18 mm base

NGK big base spark plug (18 mm), for cylinder head. Specially adapted to pre-war. Sold individually

Spark plug extension x 4 - Citroen HY

Spark plug extension x 4 - Citroen HYGasoline engine from 1963 and end of series

Soundproofing with adhesive 1m2

Sound insulation in heavy plates. Allows you to lower the sound level. Self-adhesive (film to be removed before installation). Plate 200 x 500 mm. The package contains 10 plates, i.e. 1 m2 in total

solid copper cylinder head gasket 3mm Simca Versailles Chambord

Solid copper cylinder head gasket. Thickness 3 mm. Used with very planed cylinder head. For V8 Simca Trianon, Versailles, Régence, Beaulieu, Chambord, Présidence, Marly 1 and 2, Ariane 8. Also exists in 2mm version (available on the ...

solid copper cylinder head gasket 2 mm Simca Versailles Chambord

Solid copper cylinder head gasket. Thickness 2 mm. Used with planed cylinder head. For V8 Simca Trianon, Versailles, Régence, Beaulieu, Chambord, Présidence, Marly 1 and 2, Ariane 8. Also exists in 3mm version (available on the shop) Tightening ...

Soles kit for handles and locks - Ford Vedette berline and Vendome

Soles kit for Ford Vedette berline and Vendôme. French manufacture by Techni-Tacot.Including:4 x soft soles for exterior door handles2 x soft soles for exterior door lock

Solenoid coil Rushmatic Simca Chambord Presidence

12v solenoid type actuator for Rushmatic. Supplied with connection wire, central rod and dust cover. Mounted on Rushmatic Simca (Rush-Matic)

Sliding side door seal. - Peugeot D3 D4

Set of 2 windscreen gaskets for Peugeot D3 or D4.

Slide x 10m Simca Chambord Versailles

Roll of 10 m glass slide 15x h13mm.

simplified kit - for gasoline pump SEV - Renault Fregate Prairie Goelette Galion

Reduced repair kit for SEV D100mm fuel pump. Fitted on Renault Frégate Prairie Goelette Galion. Please check the brand of your pump before ordering

Simca Versailles-Ariane trunk seal

Trunk seal for Simca Versailles, Ariane, Chambord etc.

Simca Versailles rear wheel hub kit

" Rear hub repair kit for one wheel: Simca Trianon, Versailles, Régence, Marly 1 1 bearing 1 adapter spacer 1 depth wedge The shim and the spacer are placed towards the wheel, flat side of the bearing towards the center of the bridge (see photo n ...

Simca Versailles Chambord water pump plate

Closing plate for water pump housing. Current manufacture in synthetic materials with carbon reinforcement - very solid - no corrosion possible. Mounts in place of the old one.For Simca Trianon, Versailles, Régence, station wagon Marly 1 and 2, ...

Simca Versailles Chambord oil pump pinion

Replacement pinion for oil pump - V8 Simca (Versaille, Chambord, etc.). Supplied with 4 rivets. (Advantageously replaces the celoron one which has become fragile over time). Attention for Ford Vedette 12hp 2150 cm3 V8s, choose the reference " ...

€187.00 TTC
(187,00 € HT)

Simca Versailles Chambord gearbox supports

€102.80 TTC
(102,80 € HT)

Simca Versailles Chambord disc clutch

Clutch disc reconditioned, in standard exchange for Simca Versailles, Chambord and derivates. Complete disassembly, micro balling and painting. (The sending is done after receipt of the used mechanism, not destroyed)(Depending on the year, ...

€144.00 TTC
(120,00 € HT)

Simca Versailles Chambord air filter + breather sticker

Sticker for air filter and breather cap. Mounts on Simca V8 engine. Sticker

Simca Versailles 19mm rear brake cylinder kit

Complete repair kit for rear wheel cylinder in 19 mm. Supplied with pistons.

€40.80 TTC
(34,00 € HT)

Simca V8 cylinder head screw set

Set of 34 black phosphated hexagonal head screws - 2 screw lengths in the set. Resists up to 6 m.kg

Simca Chambord Ariane rear hub bearing kit

Rear hub kit (for 1 wheel) including:1 x sealed bearing (remove the inner side flange)1 x sealing ring (spi) outer side1 x waterproof ring (spinnaker) on the inner side of the deck.It is better to replace both sides at the same time.Mounts on ...

Simca Chambord 61 front hub kit

Front hub repair kit with D 20mm spindle, for Beaulieu, Chambord, Présidence and Marly 2 model 61.1 outer conical bearing1 internal conical bearing1 sealed ringValid for one wheel. Attention do not mount on model 1958 to 60 with Ø 19 mm ...

Simca Beaulieu steering wheel delivered lacquered in original color - remanufacturing - standard exchange

Steering wheel for Simca Beaulieu.Refabrication from the original frame, careful and quality production. Delivered painted, without ring or badge. The shipment is made AFTER receipt of your dilapidated copy (chipped plastic, cracked but not ...

€432.00 TTC
(432,00 € HT)

Simca Aronde P60 Ariane upper hose - from A90 to end

Simca Aronde P60 Ariane upper hose. From the A90 and up to the P60 included.From dovetail A90 (mid 1954) to end of series, including Ariane 4 - diam. input 40 mm - long about 170 mm

Simca 9 Aronde P60 transmission shaft cross member all models

Simca 9 Aronde P60 transmission shaft cross member all models24x63 mm (attention 2 per vehicle)

Simca 5 rear brake shoe set 4

Set of 4 rear brake shoes in standard exchange. (Send us your game before shipping the new one)High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished jaws.

€108.00 TTC
(90,00 € HT)

Simca 5 front brake shoe set 4

Set of 4 refurbished front brake shoes, in standard exchange (Send us your set before shipping the new one).High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes.(Non ...

€108.00 TTC
(90,00 € HT)

SIMCA 5 engine gaskets kit

Gasket kit for Simca 5 engine. Cylinder head gasket included.

Simca 5 disc clutch

Clutch disc reconditioned, in standard exchange, Simca 5. Complete disassembly, micro balling and painting.The sending is done after receipt of the used mechanism, not destroyed(Depending on the year, non-contractual photo)

€107.10 TTC
(89,25 € HT)

Silicone brake fluid DOT 5 - 1L

" DOT 5 100% silicone brake fluid - 1L can - Purple color - Do not mix with other types of brake fluids. The installation must be rinsed before changing the type of liquid. Photo not contractual. "

Silent blocks and flector kit for wiper motor

Replacement kit for wiper motors (rectangular shape). French manufacture by Techni-Tacot.Including:-1 coupling flector (toothed wheel),-3 square silent blocks + 3 cylinders for fixing between engine and sheet metalSuitable for the following ...

Silent block transfer case Renault Prairie R2087 Goelette

Silent block for transfer case (4x4 vehicle). 4 silent blocks per vehicle - sold individually.

silent block suspension axle Peugeot 203 utility

Silent block for Peugeot 203 utility suspension blades.Dimensions: Ø int 16 x Ø ext 32mm - L 54 x L50 mm

Silent block rear suspension blades (for two sizes) - Simca Ariane

Set of 12 silent blocks to renovate the two sets of rear suspension blades. (includes 8 long and 4 short)Quality manufacturing in Nitrile, shore life 70, casting with a pressure steel mold (no inclusion).The price allows to equip a vehicle. ...

Silent block rear suspension blades (for two sides) - Simca Versailles Chambord

Set of 12 silent blocks to renovate the two sets of rear suspension blades. (includes 4 long and 8 short)Quality manufacturing in Nitrile, shore life 70, casting with a pressure steel mold (no inclusion).The price allows to equip a vehicle. ...

silent block pulling Renault Colorale Prairie

Silent block for tie rod. Fitted only on Renault Colorale 4x4 version 11cv. 8 per vehicle. Dimensions: d int 18 x D ext 34 mm L ext 65 mm x L int 71 mm

silent block on top and bottom pivot - Renault Frégate

Silent block mounted on front wheel pivot, top and bottom.Depending on the year, it is necessary to add a washer on each side to adjust the total length of the silent block.(4 silent blocks per vehicle) - Sold individuallydimensions     inner ...

silent block gearbox Renault Prairie R2087 Goelette

Silent block for rear mounting on gearbox.

Silent block front suspension blades - Peugeot 203-403 - 1954 at the end

Silent block for FRONT suspension with 7 blades of 70mm and for utilities U8 with suspension with 9 bladesFrom 1954 to end of series12x25x50x54

Silent block for stabilizer bar Ø 19 mm Simca Ariane

Silent block for connection between stabilizer bar and suspension pivot mounted on Simca Ariane 2.Attention there are 2 models. Thread of stabilizer bar in 19 mm - Internal diameter silents block = 23.6 mm - tapered outer diam 33 to 35 mm - ...

Silent block for stabilizer bar Ø 16 mm Simca Versailles

Silent block for connection between stabilizer bar and suspension pivot mounted on Simca Trianon, Versailles, Régence and Malry I Stabilizer bar thread in 16 mm - Silent block location diameter = 20.7 mm p > The price allows to redo only ...

Silent block for stabilizer bar Ø 16 mm Simca Ariane 1

Silent block for connection between stabilizer bar and suspension pivot mounted on Simca Ariane.Warning: there are 2 different models - stabilizer bar in 16 mm - Silent block location diameter = 20.7 mmThe price allows to redo only one side of ...

Silent block for stabilizer bar on front axle - Simca Versailles-Chambord

4 Silent block for stabilizer bar on front axle. On Simca Versailles and Chambord

Silent block eyelet Peugeot 203-403

Silent block fixed to the axle for connection with shock absorber rod.int 12 mm, ext 30 mm

silent block connecting rod on stabilizer bar - Renault Frégate

dimensions     inner diameter 13mm     Outside diameter 21mm     Inner cylinder length 21 mm     external cylinder length 17 mm4 per vehicle - Sold individually

silent block axle suspension Renault Prairie R2087 Goelette

Silent block for front and rear suspension blades and binoculars. 12 in total per vehicle except for those equipped with the large steering damper (quantity = 11) Dimensions: d int 16 x D ext 32mm - L 66 x L60mm

Silent bloc pour barre stabilisatrice Ø 19 mm Simca Chambord

Silent bloc pour liaison entre barre stabilisatrice et pivot de suspension monté sur Simca Chambord , Beaulieu Présidence et Marly II. Filetage de barre stabilisatrice en 19 mm - Diamètre intérieur silents bloc = 23.6 mm - diam ext conique 33 à ...

Silent blade block front suspension - Peugeot 203-403 - Before 1954

Silent block for FRONT suspension with 8 blades of 60mm and for utilities U8 with suspension with 8 bladesBefore 1954.12x25x45x49

side window seal - to be glued - 3 ml

side window seal - to be glued - 3 ml

side window seal - sold by the meter - Renault Goelette Galion Colorale

side window seal - sold by the meter - Renault Goélette

side window seal - by the meter - Renault Goélette

side window seal - by the meter - Renault Goelette

side window seal - 12 ml

side shim set bearing - Simca Aronde Ariane RUSH 6 and 7 hp engine

side shim set bearing - Simca Aronde Ariane RUSH 6 and 7 hp engine larg : 2.335 mm - original size

side shim set bearing +0.20 mm - Simca Aronde Ariane RUSH 6 and 7 hp engine

side shim set bearing - Simca Aronde Ariane RUSH 6 and 7 hp engineoversized + 0.20 mm

Shock absorber x2 - front Renault Prairie Colorale

Set of 2 RECORD shocks - front mounting - compressed / stretched 305 / 480mm 14mm eye

Shock absorber x 2 - rear- Renault Goelette

Pair of telescopic rear shock absorbers (Record) for Renault Goélette. Lengths: measurements taken at the base of the cartridge on one side, and at the center of the eye on the other ( this is not the overall length): 340/560 mm

Shock absorber x 2 - rear Renault Prairie Colorale

Set of 2 RECORD shocks - AR mounting - compressed / stretched 335/535 mm 14mm eye

Shock absorber x 2 - rear - Panhard 24 BT

Pair of rear shock absorbers - Record brand - Panhard 24 BT

Shock absorber x 2 - FRONT - Renault Goelette

Pair of front telescopic shock absorbers (Record) for Renault Goélette.Lengths: measurement taken at the base of the cartridge top and bottom, this is not the total length: 280/470 mm

Shock absorber x 2 - front - Panhard 24 BT

Pair of front shocks - Record brand - Panhard 24 BT

Shock absorber oil Simca Versailles Chambord

Oil intended for filling front shock absorbers for Simca Trianon, Versailles, Régence, Beaulieu, Chambord, Présidence, Marly 1 and 2, Ariane. 1L container. (Non contractual photo)

Shock absorber oil canister - Renault Goélette and derivatives

Oil canister for Renault schooner shock absorber (1L)

Shaft 8.5 mm Ø repair - repair Solex 32 PBIC carburettor or similar

Shaft dimension repair 8.5 mm with butterfly for repair carburettor Solex 32 PBIC or similarOverall length 91.5 mm

SEV JUNIOR igniter head ignition - renault 4cv

SEV JUNIOR igniter head - renault 4cv Dauphine R4 etc.Internal diameter 45mm fixed carbon

SEV JUNIOR igniter finger ignition - renault 4cv

SEV JUNIOR igniter finger - renault 4cv

SEV finger ignition large model

Finger for SEV igniter (large model)

Set Segments Ø 58.00 2x2x3 - Rosengart LR (set of 12)

Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 58. Attention in case of error on your part, these products cannot be taken back.- 8 x compression h 2mm- 4 x scraper h 3 mmContact us for other sizes.

Set Segments Ø 56.50 2.5x2.5xscraper 2.5xscraper .5 - Rosengart LR (set of 16)

Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 56.50- 4 x fire segment h 2.5mm- 4 x compression h 2.5mm- 8 x scraper h 2.5 mmPlease note that the scrapers are Ø 56.84 mm. Review the game at the cupContact us ...

set of window slides for the 2 front doors - Peugeot D3 D4

Set of window sliders for Peugeot D3 or D4.

Set of side shims for Renault crankshaft 1.65mm (original) engine 668 671 817

Set of 2 side shims for 1.65 mm crankshaft (original).For Frégate, Colorale, Galion, Goélette, SG2, R2087 engines

Set of segments Ø 69.50 mm - 3x2.5x2.5x4

Segment set Ø 69 mm to equip 4 pistons with 4 grooves:- 3x2.5x2.5x4Non contractual photo

Set of segments Ø 69 mm - 2.5x2.5x2.5x3.5

Segment set Ø 69 mm to equip 4 pistons with 4 grooves:- 2.5x2.5x2.5x3.5Non contractual photo

Set of segments STD 85.50, oversize 0.50 mm Renault Fregate

Set of 16 segments for 4 pistons, special dimension 85.50 mm reaming - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 3 mm2 x scraper in 4.5 mmPossibility of ordering in 85 mm (call us)

Set of piston rings 4 grooves Ø66.04 - 2x2x4x4 - Ford Vedette

Piston ring set Ø 66.04 - for Ford Vedette V8.For piston with 4 grooves, 2x2x4x4. Includes:- 16 compression segments 2 mm high- 16 scraper segments 4mm highNon contractual photo

Set of main bearings standard engine dimension 839 - renault 4cv Dauphine 4L - 747 - 782 and 845 cm3

Renault 4cv Dauphine 4L - 747 - 782 and 845 cm3

Set of Gaskets engine Aquilon - Simca Versailles Chambord

Seal kit produced according to Techni-Tacot requirements. Fit to Simca Versailles, Régence, Trianon, Beaulieu, Chambord, Présidence, Ariane 8 and Marly V8 engines. Contains all the gaskets (2 cylinder head gaskets 1.6 mm thick, water pump, ...

Set of flat pistons liners 78mm - Citroen Traction 15 cv

Set of 6 liners + 6 complete flat head pistons (segments, clips, pins) - Quality segments.Non contractual photo

Set of flat piston liners 78mm - Citroen Traction - U23

Set of 4 liners + 4 complete flat head pistons (segments, clips, pins) - Quality segments.Non contractual photo

Set of custom 4-groove piston rings Ford or Simca V8

Set of segments for V8 Ford Vedette, Vendôme, Simca Trianon, Versailles, Régence, Beaulieu, Chambord, Présidence, Marly 1 and 2, Ariane 8.For 4-groove piston, all dimensions, do not hesitate to contact us 033 4 42 57 79 06 for estimate.(Price ...

Set of bearing bearings dimension 0.25 engine 839 - renault 4cv Dauphine 4L - 747 - 782 and 845 cm3

Renault 4cv Dauphine 4L - 747 - 782 and 845 cm3

Set of 8 pistons 67.50 Simca Versailles Chambord

Set of 8 pistons dimension 67.50 mm, complete (with segments, pins and clips). Aluminum body, quality segmentation with spring-loaded oil scrapers. Flat heads. Mounts on Simca Trianon, Versailles, Régence, Beaulieu, Chambord, Présidence, Marly I ...

Set of 8 pistons 67.50 Ford Vedette

Set of 8 pistons - New manufacture, similar to the original model - reduction in piston mass (approximately 255 gr with rings) - molybdenum treatment - cylinder size 67.50 mm. Supplied with segments, pins and circlips - The segments supplied are ...

Set of 8 pistons 67.00 Simca Versailles Chambord

Set of 8 pistons dimension 67.00 mm, complete (with segments, pins and clips). Aluminum body, quality segmentation with spring-loaded oil scrapers. Flat heads. Mounts on Simca Trianon, Versailles, Régence, Beaulieu, Chambord, Présidence, Marly I ...

Set of 8 pistons 67.00 Ford Vedette

Set of 8 pistons - New manufacture, similar to the original model - reduction in piston mass (approx. 255 gr with segments) - molybdenum treatment - cylinder dimension 67.00 mm. Supplied with segments, pins and circlips - The segments supplied ...

Set of 8 pistons 66.50 Simca Versailles Chambord

Set of 8 pistons dimension 66.50 mm, complete (with segments, pins and clips). Aluminum body, quality segmentation with spring-loaded oil scrapers. Flat heads. Mounts on Simca Trianon, Versailles, Régence, Beaulieu, Chambord, Présidence, Marly l ...

Set of 8 pistons 66.50 Ford Vedette

Set of 8 pistons - New manufacture, similar to the original model - reduction in piston mass (approximately 255 gr with rings) - molybdenum treatment - cylinder dimension 66.50 mm. Supplied with segments, pins and circlips - The segments supplied ...

Set of 8 pistons 66.04 Simca Versailles Chambord

Set of 8 pistons original dimension (66.04 mm) complete (with segments, pins and clips). Aluminum body, quality segmentation with spring-loaded oil scrapers. Flat heads. Mounts on Simca Trianon, Versailles, Régence, Beaulieu, Chambord, ...

Set of 8 pistons 66.04 Ford Vedette

Set of 8 pistons - New manufacture, similar to the original model - reduction in piston mass (approximately 255 gr with rings) - molybdenum treatment - cylinder dimension 66.04 mm. Supplied with segments, pins and circlips - The segments supplied ...

Set of 8 inner valve springs - cast iron cylinder head - Citroen Traction HY U23

Set of 8 inner valve springs - cast iron cylinder head - Citroen Traction HY U23

Set of 8 external valve springs - cast iron cylinder head - Citroen Traction HY U23

Set of 8 external valve springs - cast iron cylinder head - Citroen Traction HY U23

Set of 78mm flat piston liners - Citroen HY with Traction engine - Before 1963

Set of 4 liners + 4 complete flat head pistons (segments, clips, pins) - Quality segments.Bore Ø 78 mm - For Citrien HY engine before 1963 (Traction type engine with cast iron cylinder head)total height of jacket 185.50 mm top / base height ...

Set of 75 mm bomb pistons/ liners - Peugeot 203 - 403 - 7cv

" Set of 4 liners + 4 complete domed pistons (segments, clips, axles) for Peugeot 203 or 403 (7cv). New product. STD original dimension, bore 75 mm. Non-contractual photo "

Set of 4 SUMB Marmon brake shoes

" Set of 4 relined brake shoes, in standard exchange. (Send us your set before shipment of the new one) High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes. (non ...

€211.20 TTC
(176,00 € HT)

Set of 4 rubber rings for Peugeot 203 pivots

Set of 4 rubber rings for Peugeot 203 pivots.Approximate dimensions:- 7 x 33 x 41 mm- 7.5 x 25 x 34 mmAllows to equip the 2 steering pivots.

Set of 4 Rosengart brake shoes

Set of 4 relined brake shoes, in standard exchange. (Send us your set before shipping the new one) High performance friction, applied by industrial bonding, no more rivets which damage the drums. Micro blunt brake shoes.

€120.00 TTC
(100,00 € HT)

Set of 4 Renault Fregate front brake shoes

Set of 4 rear brake shoes in standard exchange. (Send us your game before shipping the new one). High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes.Width 67mm x 280mm

€168.00 TTC
(140,00 € HT)

Set of 4 relined rear brake shoes Simca Versailles

Set of 4 relined brake shoes (AR) for Simca V8 in standard exchange. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets which can damage the drums.Shipping upon receipt of worn parts.

€112.00 TTC
(93,33 € HT)

Set of 4 relined rear brake shoes Simca Chambord

Set of 4 relined brake shoes (AR) for Simca V8 in standard exchange. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets which can damage the drums.Shipping upon receipt of worn parts.

€139.20 TTC
(116,00 € HT)

Set of 4 relined rear brake shoes Simca Ariane

Set of 4 relined brake shoes (Ar) for Simca Ariane 4 or Ariane 8 - in standard exchange. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets which can damage the drums.Shipping upon receipt of ...

€112.00 TTC
(93,33 € HT)

Set of 4 relined rear brake shoes Simca 8 brake

Set of 4 relined brake shoes (AR) for Simca 8 in standard exchange. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets which can damage the drums.Shipping upon receipt of worn parts.

€112.00 TTC
(93,33 € HT)

Set of 4 relined rear brake shoes Renault Colorale Prairie, Goelette, R2087

Set of 4 rear brake shoes relined in standard exchange for Renault Prairie, Colorale, R2087, Goélette and derivatives. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets that could damage the ...

€192.00 TTC
(160,00 € HT)

Set of 4 relined rear brake shoes for Renault Galion

Set of 4 relined brake shoes (Ar) in standard exchange for Renault Galion. Microblasting, varnish, industrial bonding of friction. Strong adhesion.Eliminates the problem of rivets that could damage the drums. Shipping upon receipt of worn ...

€216.00 TTC
(180,00 € HT)

Set of 4 relined rear brake shoes for Peugeot D3 D4

Set of 4 rear brake shoes, 46 mm wide. relined in standard exchange for Peugeot D3 D3A D3B ... D4 D4A D4B etc. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets that could damage the drums. ...

€156.00 TTC
(130,00 € HT)

Set of 4 relined rear brake shoes Citroen U23

Set of 4 relined brake shoes (Ar) in standard exchange for Citroen U23. Microblasting, varnish, industrial bonding of friction. Strong adhesion.Eliminates the problem of rivets that could damage the drums. Shipping upon receipt of worn parts.Non ...

€226.00 TTC
(188,33 € HT)

Set of 4 relined rear brake shoes - Renault SG2

Set of 4 rear brake shoes relined in standard exchange for Renault SG2. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets that could damage the drums. Shipping upon receipt of worn parts.

€216.00 TTC
(180,00 € HT)

Set of 4 relined REAR brake shoes - Panhard

Set of 4 relined brake shoes (front or rear) 195 mm x 30 mm in standard exchange for Panhard Dyna X86, Dyna Z, PL 17 and series 24Microblasting, varnish, industrial bonding of friction. Strong adhesion.Eliminates the problem of rivets that could ...

€117.60 TTC
(98,00 € HT)

Set of 4 relined rear brake shoes - FIAT 508 Ballila

Set of 4 relined brake shoes (Fr) standard exchange. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets which can damage the drums.Shipping upon receipt of worn parts.

€96.00 TTC
(80,00 € HT)

Set of 4 relined rear brake shoes - FIAT 508 Ballila

Set of 4 relined brake shoes (AR) for Fiat ballila in standard exchange. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets which can damage the drums.Shipping upon receipt of worn parts.

€96.00 TTC
(80,00 € HT)

Set of 4 relined REAR brake shoes - 4CV

Set of 4 relined brake shoes (Front or Rear) 195 mm x 30 mm in standard exchange for 4 HP.Microblasting, varnish, industrial bonding of friction. Strong adhesion.Eliminates the problem of rivets that could damage the drums.Shipping upon receipt ...

€108.00 TTC
(90,00 € HT)

Set of 4 relined front brake shoes Simca Chambord

" Set of 4 relined brake shoes (Av) for Simca V8 in standard exchange. Microblasting, varnish, industrial friction bonding. Strong adhesion. Eliminates the problem of rivets which can damage the drums. Shipping upon receipt of worn parts. "

€186.00 TTC
(155,00 € HT)

Set of 4 relined front brake shoes Simca Ariane

Set of 4 relined brake shoes (Front) for Simca Ariane 4 or Ariane 8 - in standard exchange. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets which can damage the drums.Shipping upon receipt ...

€112.00 TTC
(93,33 € HT)

Set of 4 relined front brake shoes Simca 8 brake

Set of 4 relined brake shoes (front) for Simca 8 in standard exchange. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets which can damage the drums.Shipping upon receipt of worn parts.

€112.00 TTC
(93,33 € HT)

Set of 4 relined front brake shoes Simca 1300

Set of 4 relined brake shoes (AV) for Simca 1300 in standard exchange. Bead blasting, varnish, industrial friction bonding. Strong adhesion. Eliminates the problem of rivets that can damage drums.Shipping upon receipt of worn parts.

€127.20 TTC
(106,00 € HT)

Set of 4 relined front brake shoes Renault Colorale Prairie, Goelette, R2087

Set of 4 front brake shoes relined in standard exchange for Renault Prairie, Colorale, R2087, Goélette and derivatives. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets that could ...

€192.00 TTC
(160,00 € HT)

Set of 4 relined front brake shoes from Simca Versailles

Set of 4 relined brake shoes (Front) for Simca V8 in standard exchange. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets which can damage the drums.Shipping upon receipt of worn parts.

€162.00 TTC
(135,00 € HT)

Set of 4 relined front brake shoes for Renault Galion

Set of 4 relined brake shoes (Front) in standard exchange for Renault Galion. Microblasting, varnish, industrial bonding of friction. Strong adhesion.Eliminates the problem of rivets that could damage the drums. Shipping upon receipt of worn ...

€192.00 TTC
(160,00 € HT)

Set of 4 relined front brake shoes for Peugeot D3 D4

Set of 4 front brake shoes width 57 mm relined in standard exchange for Peugeot D3 D3A D3B ... D4 D4A D4B etc. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets that could damage the drums. ...

€156.00 TTC
(130,00 € HT)

Set of 4 relined front brake shoes Citroen U23

Set of 4 relined brake shoes (Front) in standard exchange for Citroen U23. Microblasting, varnish, industrial bonding of friction. Strong adhesion.Eliminates the problem of rivets that could damage the drums. Shipping upon receipt of worn ...

€174.00 TTC
(145,00 € HT)

Set of 4 relined brake shoes Panhard Dyna x86

Set of 4 relined brake shoes (front or rear) 195 mm x 30 mm in standard exchange for Panhard Dyna X86, Dyna Z, PL 17 and series 24Microblasting, varnish, industrial bonding of friction. Strong adhesion.Eliminates the problem of rivets that could ...

€117.60 TTC
(98,00 € HT)

Set of 4 rear brake shoes Simca 6

Set of 4 rear brake shoes relined, in standard exchange for Simca 6 (non contractual photo). High performance friction, excellent grip, applied by industrial bonding, elimination of rivets which damage the drums. Pickled and varnished brake ...

€108.00 TTC
(90,00 € HT)

Set of 4 rear brake shoes Peugeot 404

Set of 4 REAR brake shoes relined, in standard exchange. Peugeot 403 (Send us your set before shipping the new one)High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished jaws.(Non ...

€132.00 TTC
(110,00 € HT)

Set of 4 rear brake shoes Peugeot 203

Set of 4 rear brake shoes relined, in standard exchange. Peugeot 203. assembly (Send us your set before shipment of the new one) High performance friction, applied by industrial bonding, no more rivets which damage the drums. Pickled and ...

€98.40 TTC
(82,00 € HT)

Set of 4 rear brake shoes Mercedes 190 SL

Set of 4 rear brake shoes in standard exchange. (Send us your set before shipping the new one)High performance friction, applied by industrial bonding, no more rivets damaging the drums. Micro billed and varnished brake shoes.(Non contractual photo)

€134.40 TTC
(112,00 € HT)

Set of 4 rear brake shoes HY or type H Citroen

Set of 4 rear brake shoes - standard exchange. (Send us your game before shipping the new one). High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes.

€126.00 TTC
(105,00 € HT)

Set of 4 rear brake shoes Citroen Trefle

Set of 4 rear brake shoes relined, in standard exchange (Send us your set before shipment of the new one).High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished jaws.(Non contractual ...

€84.00 TTC
(70,00 € HT)

Set of 4 rear brake shoes 403 UtilityU8 Peugeot

Set of 4 rear brake shoes - standard exchange. (Send us your set before shipping the new one). High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes.

€139.20 TTC
(116,00 € HT)

Set of 4 rear brake shoes 203 UtilityU8 Peugeot

Set of 4 rear brake shoes - standard exchange. (Send us your set before shipping the new one). High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes.

€162.00 TTC
(135,00 € HT)