Master cylinder kit 38.1 mm - Renault Galion
Repair kit for 38.1 mm master cylinder.
(74,75 € HT)
Brake cylinder 28.5mm - entry 11mm (7/16th) - Peugeot Q3A
Brake cylinder 28.5mm - entry 11mm (7/16th) -
(65,00 € HT)
Remise en état lot de pièces spécifiques
(90,00 € HT)
segment set 85 mm 2x2x2x4x4 Renault Fregate
Set of 20 segments for 4 eyebolts dimension 85 mm - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 2 mm2 x scraper in 4 mmPossibility of ordering in 85 mm (call us)
(138,00 € HT)
copy of Oil pressure contact mano - Ford Vedette 1949 - 54
oil pressure switch for Ford Vedette engine from 1949 to 1954 - Thread M 10x100
(10,50 € HT)
Rear brake cylinder 19mm - 3/8 Panhard 24 - 07/1964 to end
Rear wheel cylinder 19mm - Panhard 24 équipé frein à tambours - 07/1964 à fin de série
(57,60 € HT)
Brake hose front and rear 378 mm Simca Aronde feb/1956 to nov/1957
Brake hose front and rear 378 mm Simca Aronde feb/1956 to nov/1957
(26,00 € HT)
copy of Set of segments STD 85.50, oversize 0.50 mm Renault Fregate
Set of 16 segments for 4 pistons, special dimension 85.50 mm reaming - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 3 mm2 x scraper in 4.5 mmPossibility of ordering in 85 mm (call us)
(138,00 € HT)
Best Sellers
Ignition capacitor 6, 12 and 24V
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Rear brake cylinder 28.57 mm - 1 1/8 Renault Colorale, Prairie, R2087, Goelette
" Rear wheel cylinder. Diam: 1" "1/8 or 28.6 mm. Liquid inlet diameter = 11.4 mm (1/2 20 f / p) Renault Colorale, Prairie, R2087, Goélette, 1000 kg, 1400 Kg and derivatives . "
(75,35 € HT)
Front brake cylinder kit 34.9 mm - 1 3/8 Renault Prairie R2087 Goelette
Repair kit for AV cylinder. d 34.93 mm
(16,00 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,35 € HT)
Ignition - 4 x Spark plugs for Renault Fregate
Set of 4 NGK spark plugs with std base (14 mm), Renault Fregate, Colorale, Prairie engine (side engine 603 and tumbled 668 or 671), R2087, Goélette, Galion, SG2 gasoline (engine 671 or 817) etc. Compatible with SP95 and SP98 fuels
(20,00 € HT)
Engine There are 93 products.
Valve guide x4 - original - 8.5x14.05x56.50 - Peugeot 203 - 403
Set of 4 valve guides adm. and cast iron scale: original outside bore Ø 14.05 - 8.5x14.05x56.50Peugeot 203 and 403, 1290cm³ TM4 TMP4 D4A engines, diam. int. 8.5mm, diam. ext. 14.05mm, length 55.4mm.(8 guides per cylinder head)
(24,92 € HT)
Valve guide x4 - +0.10 MM - 8.5x14.16x56.50 - Peugeot 203 - 403
Set of 4 cast iron intake and exhaust valve guides: outer bore repair dimension + 0.11 = Ø 14.16 - 8.5x14.11x56.50Peugeot 203 and 403, 1290cm³ TM4 TMP4 D4A engines, inner diameter 8.5mm, diam. ext. 14.05mm, length 55.4mm.(8 guides per cylinder head)
(24,92 € HT)
Valve guide x4 - + 0.05 MM - 8.5x14.11x56.50 - Peugeot 203 - 403
Set of 4 cast iron inlet and exhaust valve guides: outer bore repair dimension + 0.6 = Ø 14.11 - 8.5x14.11x56.50Peugeot 203 and 403, 1290cm³ TM4 TMP4 D4A engines, inner diameter 8.5mm, diam. ext. 14.05mm, length 55.4mm.(8 guides per cylinder head)
(24,92 € HT)
Temperature manometer with probe - ivory background
Mano "OS" temperature indicator (without electrical connection). Direct reading by probe mounted on a radiator hose (high outlet). 52 mm recess on the pressure gauge side.Capillary 1m80. Delivered with lighting and probe for the hose.
(80,00 € HT)
Temperature manometer with probe - black background
Mano "OS" temperature indicator (without electrical connection). Direct reading by probe mounted on a radiator hose (high outlet). 52 mm recess on the pressure gauge side.Capillary 1m80. Delivered with lighting and probe for the hose.
(80,00 € HT)
Support de manomètre
Support métalique, laqué noir pour manomètre standard D52 mm. Prêt à fixé.
(7,94 € HT)
Shaft 8.5 mm Ø repair - repair Solex 32 PBIC carburettor or similar
Shaft dimension repair 8.5 mm with butterfly for repair carburettor Solex 32 PBIC or similarOverall length 91.5 mm
(18,29 € HT)
Set of linerss / domed pistons 75mm - D3 - D3A - D3B - 7cv
Set of 4 liners + 4 complete domed pistons (segments, clips, axles) for Peugeot utility D3, etc (7cv).New product. STD original dimension, bore 75 mm. Non contractual photo
(290,00 € HT)
Set of 4 Peugeot D3 D4 spark plugs
Set of 4 NGK spark plugs for Peugeot D3 D4 petrol enginesCompatible with SP 95 or Sp 98 fuel
(20,00 € HT)
Set of 4 Peugeot 203-403 spark plugs
Set of 4 NGK spark plugs for Peugeot 23 and 403 petrol enginesCompatible with SP 95 or Sp 98 fuel
(20,00 € HT)
Set 4 cylinder seals - Peugeot 203 403 8cv - 80mm
Set 4 cylinder seals - Peugeot 203 403 8cv - 80mm
(16,58 € HT)
Segment set Ø 80 mm Peugeot 403 - 2cx2x4.5x4.5
Segment set Ø 80 mm Peugeot 403 - 2cx2x4.5x4.5
(110,00 € HT)
Segment set Ø 80 mm Peugeot 203 403 - 8cv - 2x2x4.5
Segment set Ø 80 mm Peugeot 203 403 - 8cv - 2x2x4.5
(121,00 € HT)
Segment set Ø 75 mm Peugeot 203 403 - 7cv - 2x2x4.5
Segment set Ø 75 mm Peugeot 203 403 - 7cv - 2x2x4.5
(110,00 € HT)
Segment set Ø 75 mm Peugeot 203 403 - 7cv - 2.5x2.5x4.5
Segment set Ø 75 mm Peugeot 203 403 - 7cv - 2.5x2.5x4.5
(110,00 € HT)
Segment set Ø 75 mm Peugeot 203 403 - 7cv - 2.5x2.5x2.5x4.5x4.5
Segment set Ø 75 mm Peugeot 203 403 - 7cv4 x sets each comprising 3 2.5 mm compression rings + 2 4.5 mm oil scraper rings.Non contractual photo
(150,00 € HT)
Sandblasting tablets x 2 - 60 mm cylinder head Peugeot 203 403
Set of 2 pellets diam. 60mm on cylinder head for Peugeot 203-403
(15,00 € HT)
Sandblasting tablet 52 mm pump side Peugeot 203 403
1 pellet diam. 52mm on cylinder head, behind water pump
(8,25 € HT)
Reinforced collar for exhaust - Ø 64-67 mm
Reinforced collar for exhaust - Ø 64-67 mmRobust French manufacturing
(6,50 € HT)
Reinforced collar for exhaust - Ø 52-55 mm
Reinforced collar for exhaust - Ø 52.55 mmRobust French manufacturing
(5,42 € HT)
Reinforced collar for exhaust - Ø 44-47 mm
Reinforced collar for exhaust - Ø 44-47 mmRobust French manufacturing
(4,83 € HT)
Pressure hose for igniter Ø 6 mm - by the meter
Hose to connect the igniter / carburetor depression 6 mm sold by the meter.
(8,50 € HT)
Peugeot 203-403 oil filter cartridge
Cartridge for Peugeot 203-403 petrol oil filter
(9,95 € HT)
paper gasket x 2 + thermal wedge for solex 32 pbic carburetor
kit 2 joints papier + cale thermique pour embase de carburateur Solex 32 pbi.
(12,46 € HT)
Metal body battery switch - safety
Coupe batterie - permet d'isoler électriquement la batterie.
(22,50 € HT)
Mechanism clutch Peugeot D3 D4
Clutch mechanism reconditioned, in standard exchange. Mounted on Peugeot D3 D4, etc ...Complete disassembly, micro balling, surfacing and retaring of the pressure plate.(The sending is done after receipt of the used mechanism, not destroyed - ...
(230,00 € HT)
Manometer Tachometer - 2 - 4 - 6 - 8 cyl - electric 12V - ivory background - for negative to mass
Mano "OS" Tachometer 0 to 5000 rpm for 4-cylinder petrol engine. Connects to the "break" terminal on the ignition coil. 52 mm recess on the pressure gauge side. delivered with lighting. for negative to ground
(58,29 € HT)
Manometer Tachometer - 2 - 4 - 6 - 8 cyl - electric 12V - black background - for negative to mass
Mano "OS" Tachometer 0 to 5000 rpm for 4-cylinder petrol engine. Connects to the "break" terminal on the ignition coil. 52 mm recess on the pressure gauge side. delivered with lighting. for negative to ground
(58,29 € HT)
IGOL semi-synthetic 15W50 oil - 5L can
Can of 5 L.Viscosity: 15W-50BenefitsHéRITAGE ZS semi-synthetic oil.Multigrade lubricant for gasoline engine of tourism, reinforced with synthetic bases, particularly adapted to the old engines, gasoline or diesel, equipped with an oil filter - ...
(35,00 € HT)
IGOL Oil for screw bridge and bronze crown - 2 liters - Peugeot 203 403 404
Special lubricant for rear axle and worm reducers. Has excellent pressure resistance properties, a very high viscosity index and good protection against oxidation and corrosion. Miscible with castor-based oils, and with extreme pressure oils. ...
(32,60 € HT)
IGOL 20W50 mineral oil - 5L can
5 l can (non contractual photo) - Viscosity: 20W-50BenefitsHéRITAGE GTZ mineral oil.Multigrade lubricant for Gasoline and Diesel engines, made from severely refined mineral bases and additives suitable for older engines. The anti-wear additive ...
(30,00 € HT)
Ignition set of SEV breakers
" Set of breakers for SEV igniter For Renault Prairie, R2087, Goélette and derivatives "
(12,00 € HT)
Ignition set of Ducellier breakers
Set of breakers for Ducellier distributor For Renault Prairie, R2087, Goélette and derivatives
(12,00 € HT)
Ignition head Ducellier 65 mm
Head for Ducellier distributor: Interlocking inside the head = 65 mm, outside about 72 mm.To be assembled with breakers 1 237 013 808, and ducellier finger.
(20,42 € HT)
Ignition finger igniter Ducellier 65mm
Finger for Ducellier distributor equipped with a 65mm headMounts with Ducellier 65 mm head
(11,25 € HT)
Ignition coil 12v VALEO
Ignition coil guaranteed for use with a 12 V platinum screw igniter (breakers). Impedance respected to prevent the breakers from bluing.Works perfectly also with electronic module or integral electronic igniter. (Non contractual photo)
(45,00 € HT)
Ignition coil 12v standard
Ignition coil guaranteed for use with a 12 V platinum screw igniter (breakers). Impedance respected to prevent the breakers from bluing.Works perfectly also with electronic module or integral electronic igniter. (Non contractual photo)
(38,70 € HT)
Ignition - SEV Peugeot D3 D4 distributor head
SEV distributor head for Peugeot D3 D4
(24,92 € HT)
Ignition - protected harness Peugeot D3 D4 petrol
Ignition harness for Peugeot D3 D4 petrol engine.Current quality manufacture in red silicone.
(58,29 € HT)
Ignition - Electronic ignition for Peugeot 203/403 / D3 / D4
123 Ignition electronic ignition for Peugeot 203, 204, 304, 403, D3, D4, 404, 504, 505, J5, J7, J9Replaces S.E.V. Marchal and Ducellier M3, M12, XC1, M127, M59, M43, M75, M48, M36, M42, M50, M53, M77, M78, M95, M71, M86 & M130Installs in ...
(300,00 € HT)
Ignition - complete igniter with vacuum - M48
Complete igniter with vacuum capsule AND centrifugal advance - similar curve Ducellier M48 - maximum advance 12 ° on igniter - delivered tested and greased. Dimensions :- length between shoulder (stop under the body) and end of trainer: 64mm- ...
(99,50 € HT)
Gasket paste for motor - auto extrudable cartridge 200 ml
Mot. Silicone gasket & self-extruding housing RTV K164 high-quality, heat-resistant silicone base: modified oxime silicone (acid-free hardening system)
(35,00 € HT)
gasket for solex 32 pbic carburetor
2 x paper gaskets for Solex 32 pbi carburetor base.Fixing center distance: 60 mmCentral passage: 32 mmTotal length: 78 mmwidth: 50mm
(3,80 € HT)
Fuel pump with lever Peugeot 203/403
Fuel pump with Peugeot 203, 403, utility D3, D4 and derivatives. Supplied with base gasket.
(35,00 € HT)
Fuel pump repair kit 4291 - Peugeot 203 403 D3 D4
Fuel pump repair kit ref 4291 for Peugeot 203, 403, utility D3, D4 and derivatives.Also suitable for pumps ref. 3291,3292, 3320, 3397 and 4292.
(15,00 € HT)
Fuel needle - Solex 32 PBIC carburettor or similar
Fuel needle - Solex 32 PBIC carburettor or similar
(9,90 € HT)
Fuel gauge - replacement plastic float
White plastic float. Used to replace ring gauge floats.
(12,50 € HT)
Fuel gauge - replacement float
Float in synthetic material resistant to current fuels. Used to replace the cork floats on the fuel gauge Length: 1.40" Diameter: 1.14"
(17,72 € HT)
Ford RAL 5005 blue engine paint - 500 ml
Ford RAL 5005 blue engine paint - 500 ml jarSuitable for engines, housings, gearboxes, differentials, brake drums and all parts subject to heating in cast iron, steel and light alloys.Direct application on degreased metal (or better, treated with ...
(34,00 € HT)
Exhaust suspension ring 63x96 width 27 mm - Peugeot 203
Suspension ring for Peugeot 203 exhaust and othersDimension approximately 63 x 96 x width 27 mm
(11,00 € HT)
Exhaust support strap reinforces 90 mm
Suspension strap for exhaust. Robust construction, reinforced rubber, metal eyelets.92 mm center distance for M8 mm screws.
(13,48 € HT)
Exhaust manifold paint - 250 ml
(40,00 € HT)
Engine seal kit Peugeot 203 D3 7cv engine
Seal kit Peugeot 203 and D3 with 7cv engine bore 75 mm. Included cylinder head gasket, liner base gasket, manifold, etc.
(51,53 € HT)
Engine red paint - 500 ml -
Engine red paint -Pot of 500 mlSuitable for engines, housings, gearboxes, differentials, brake drums and all parts subject to heating in cast iron, steel and light alloys.Direct application on degreased metal (or better, treated with our Phosprim ...
(34,00 € HT)
Engine paint oxide green RAL 6020 - 500 ml
Engine paint oxide green RAL 6020 -Pot of 500 mlSuitable for engines, housings, gearboxes, differentials, brake drums and all parts subject to heating in cast iron, steel and light alloys.Direct application on degreased metal (or better, treated ...
(34,00 € HT)
Engine paint black RAL 9005 - 500 ml
Black paint - 500 ml jarSuitable for engines, housings, gearboxes, differentials, brake drums and all parts subject to heating in cast iron, steel and light alloys.Direct application on degreased metal (or better, treated with our Phosprim 4090), ...
(34,00 € HT)
Engine gasket kit Peugeot D4A D4B 8cv engine
Peugeot D4A and D4B gasket set with 8hp engine, 80 mm bore. Includes cylinder head gasket, liner base gasket, collector gasket, etc.
(145,00 € HT)
Electronic ignition amplifier assistance module - 12V negative to earth
Electronic ignition assistance module. Allows for more energetic spark plug ignition, improved starting, smoother pick-up, helps reduce fuel consumption and consequently pollution.The breakers (platinum-plated screws) are left in place - the ...
(57,00 € HT)
Echappement sangle support renforcé 50 mm
Sangle de suspension pour échappement, caoutchouc armé. entraxe 52 mm pour vis M8 mm.
(9,03 € HT)
Ducellier head ignition 65 mm for R5/R6/...CX/DS/...204/304...
Head for Ducellier lighter: Fitting inside the head = 65 mm, outside about 72 mm.For Renault R5/R6/R8/R10/R12/R15/R16/R20, Citroen CX/DS/ID/H/HY/HZ, Peugeot 204/304/306/404/504/j7
(20,42 € HT)
Double pressure gauge holder
Metal support, black lacquered for standard manometer D52 mm. Ready to fix.
(10,00 € HT)
Distribution chain 64 links Peugeot 203 and 403
Timing chain for Peugeot 203,403 engine and derivatives - 64 links (for model with tensioner)
(30,50 € HT)
Dark green engine paint RAL 6005 - 500 ml
Dark green engine paint RAL 6005 -Pot of 500 mlSuitable for engines, housings, gearboxes, differentials, brake drums and all parts subject to heating in cast iron, steel and light alloys.Direct application on degreased metal (or better, treated ...
(34,00 € HT)
Connecting rod bearings set - Peugeot 203 - Peugeot D3 D4 standard dimension
Set of bearings for 4 Peugeot D3 D4 connecting rodsStandard origin dimension. French made.
(135,00 € HT)
Connecting rod bearings set - Peugeot 203 - 403 dimension 0.50
Set of bearings for 4 Peugeot 203 and 403 connecting rods.Repair dimension 0.50. French made.
(165,00 € HT)
Connecting rod bearings set - Peugeot 203 - 403 dimension 0.30
Set of bearings for 4 Peugeot 203 and 403 connecting rods.Repair dimension 0.30. French made.
(150,00 € HT)
Clutch disc 200 mm - Peugeot D3 D4
Clutch disc reconditioned, in standard exchange for Peugeot D3 D4. Complete disassembly, micro balling and painting. (The sending is done after receipt of the used mechanism, not destroyed)(Depending on the year, non-contractual photo)
(86,00 € HT)
Charger and maintenance 6v / 12v Accumate
AccuMate is designed to automatically charge and monitor batteries without the danger of overcharging them, regardless of plug-in time. AccuMate is available for all 6V and 12V lead acid batteries, making it a perfect accessory for owners of ...
(60,00 € HT)
Calibrouge (Plastigage) mechanical clearance measurement
"Plastigage"The Calibrouge ("plastigage or plastigauge") is a simple and practical tool for measuring the clearances of your bearings. Range of use: operating clearance from 0.025 to 0.175 mm
(22,50 € HT)
Bearing set - Peugeot 203 - 403 STD side
Set of 3 bearings for Peugeot 203 and 403.Original standard dimension
(538,00 € HT)
Bearing set - Peugeot 203 - 403 0.50
Set of 3 bearings for Peugeot 203 and 403.Repair dimension 0.50.
(385,00 € HT)
Bearing set - Peugeot 203 - 403 0.30
Set of 3 bearings for Peugeot 203 and 403.Repair dimension 0.30.
(385,00 € HT)
Bearing clutch Peugeot 203 - 403 - D3 - D4
Graphite stop for clutch mechanism.
(44,99 € HT)
Bearing 6203 - 17x40x12
Bearing - 17x40x12 waterproof (often used on dynamo, water pump, flywheel center, etc.). Check with the dimensions of your bearing.
(9,00 € HT)
Battery switch - safety
Battery isolator - used to electrically isolate the battery. To be placed on a terminal of the battery.
(10,00 € HT)
Axle 8.5 mm Ø repair - without butterfly - Solex 32 PBIC or similarsimilar
Shaft dimension repair 8.5 mm without butterfly for repair carburettor Solex 32 PBIC or similarOverall length 91.5 mm
(14,13 € HT)
Axe 8 mm avec papillon pour réparation carburateur Solex 32 PBIC ou similaire
(18,29 € HT)
Aviation collex type paste gasket for cylinder head - 450ml
Sealing paste to be applied on both sides of a cylinder head gasket. Product similar to "Collex". Leave to evaporate for about 30 min at room temperature after application, then fit the gasket - improves the seal - recommended with solid copper ...
(35,00 € HT)
Aviation collex type paste gasket for cylinder head - 117ml
Sealing paste to be applied on both sides of a cylinder head gasket. Product similar to "Collex". Leave to evaporate for about 30 min at room temperature after application, then fit the gasket - improves the seal - recommended with solid copper ...
(22,00 € HT)
Aerosol gasket for cylinder head
Sealing spray varnish to be sprayed on both sides of a cylinder head gasket. Improves sealing, essential with solid copper gaskets (any thickness)
(35,00 € HT)
80 mm FLAT piston liners set - Peugeot 403 - D4 - 8cv
Set of 4 liners + 4 complete FLAT pistons (segments, clips, axles) for Peugeot 403 (8cv). The manufacture of the pistons and the choice of segmentation are guaranteed of quality.New product. Original STD dimension, bore 80 mm.
(290,00 € HT)
12v to 6v regulator for temperature, pressure, fuel gauge
This module allows the use of 6V pressure gauges on a 12V vehicle (negative to ground). Mounts on a temperature gauge, pressure, fuel gauge, ...Very practical, it is fixed directly on the supply terminal of the pressure gauge thanks to a hole ...
(30,00 € HT)
12V electric fuel pump
" 12V electric fuel pump. Connects in series with the original fuel line. Keeps the hand pump. Avoids having to lift the hood to turn up gasoline before starting. To be powered through a push button for occasional operation. Low pressure, no ...
(55,00 € HT)