Front brake cylinder 31.75 mm - SAMBRON
Front brake cylinder - Ø 31.75 mm - Sambron
(69,50 € HT)
Adapter connection 7/16 male - 3/8 female
Adaptateur freinage mâle 7/16 (envion 11mm) femelle 3/8
(17,50 € HT)
Master cylinder kit 38.1 mm - Renault Galion
Repair kit for 38.1 mm master cylinder.
(74,75 € HT)
Brake cylinder 28.5mm - entry 11mm (7/16th) - Peugeot Q3A
Brake cylinder 28.5mm - entry 11mm (7/16th) -
(65,00 € HT)
Remise en état lot de pièces spécifiques
(90,00 € HT)
segment set 85 mm 2x2x2x4x4 Renault Fregate
Set of 20 segments for 4 eyebolts dimension 85 mm - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 2 mm2 x scraper in 4 mmPossibility of ordering in 85 mm (call us)
(138,00 € HT)
copy of Oil pressure contact mano - Ford Vedette 1949 - 54
oil pressure switch for Ford Vedette engine from 1949 to 1954 - Thread M 10x100
(10,50 € HT)
Best Sellers
Ignition capacitor 6, 12 and 24V
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Rear brake cylinder 28.57 mm - 1 1/8 Renault Colorale, Prairie, R2087, Goelette
" Rear wheel cylinder. Diam: 1" "1/8 or 28.6 mm. Liquid inlet diameter = 11.4 mm (1/2 20 f / p) Renault Colorale, Prairie, R2087, Goélette, 1000 kg, 1400 Kg and derivatives . "
(75,35 € HT)
Front brake cylinder kit 34.9 mm - 1 3/8 Renault Prairie R2087 Goelette
Repair kit for AV cylinder. d 34.93 mm
(16,00 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,35 € HT)
Ignition - 4 x Spark plugs for Renault Fregate
Set of 4 NGK spark plugs with std base (14 mm), Renault Fregate, Colorale, Prairie engine (side engine 603 and tumbled 668 or 671), R2087, Goélette, Galion, SG2 gasoline (engine 671 or 817) etc. Compatible with SP95 and SP98 fuels
(20,00 € HT)
Best sellers There are 1558 products.
Silent block rear suspension blades (for two sides) - Simca Versailles Chambord
Set of 12 silent blocks to renovate the two sets of rear suspension blades. (includes 4 long and 8 short)Quality manufacturing in Nitrile, shore life 70, casting with a pressure steel mold (no inclusion).The price allows to equip a vehicle. ...
(117,40 € HT)
Silent block rear suspension blades (for two sizes) - Simca Ariane
Set of 12 silent blocks to renovate the two sets of rear suspension blades. (includes 8 long and 4 short)Quality manufacturing in Nitrile, shore life 70, casting with a pressure steel mold (no inclusion).The price allows to equip a vehicle. ...
(117,40 € HT)
silent block suspension axle Peugeot 203 utility
Silent block for Peugeot 203 utility suspension blades.Dimensions: Ø int 16 x Ø ext 32mm - L 54 x L50 mm
(13,92 € HT)
Silent block transfer case Renault Prairie R2087 Goelette
Silent block for transfer case (4x4 vehicle). 4 silent blocks per vehicle - sold individually.
(39,50 € HT)
Silent blocks and flector kit for wiper motor
Replacement kit for wiper motors (rectangular shape). French manufacture by Techni-Tacot.Including:-1 coupling flector (toothed wheel),-3 square silent blocks + 3 cylinders for fixing between engine and sheet metalSuitable for the following ...
(22,92 € HT)
Silicone brake fluid DOT 5 - 1L
" DOT 5 100% silicone brake fluid - 1L can - Purple color - Do not mix with other types of brake fluids. The installation must be rinsed before changing the type of liquid. Photo not contractual. "
(44,96 € HT)
Simca 5 disc clutch
Clutch disc reconditioned, in standard exchange, Simca 5. Complete disassembly, micro balling and painting.The sending is done after receipt of the used mechanism, not destroyed(Depending on the year, non-contractual photo)
(89,25 € HT)
SIMCA 5 engine gaskets kit
Gasket kit for Simca 5 engine. Cylinder head gasket included.
(277,00 € HT)
Simca 5 front brake shoe set 4
Set of 4 refurbished front brake shoes, in standard exchange (Send us your set before shipping the new one).High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes.(Non ...
(90,00 € HT)
Simca 5 rear brake shoe set 4
Set of 4 rear brake shoes in standard exchange. (Send us your game before shipping the new one)High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished jaws.
(90,00 € HT)
Simca 9 Aronde P60 transmission shaft cross member all models
Simca 9 Aronde P60 transmission shaft cross member all models24x63 mm (attention 2 per vehicle)
(98,00 € HT)
Simca Aronde P60 Ariane upper hose - from A90 to end
Simca Aronde P60 Ariane upper hose. From the A90 and up to the P60 included.From dovetail A90 (mid 1954) to end of series, including Ariane 4 - diam. input 40 mm - long about 170 mm
(25,00 € HT)
Simca Beaulieu steering wheel delivered lacquered in original color - remanufacturing - standard exchange
Steering wheel for Simca Beaulieu.Refabrication from the original frame, careful and quality production. Delivered painted, without ring or badge. The shipment is made AFTER receipt of your dilapidated copy (chipped plastic, cracked but not ...
(432,00 € HT)
Simca Chambord 61 front hub kit
Front hub repair kit with D 20mm spindle, for Beaulieu, Chambord, Présidence and Marly 2 model 61.1 outer conical bearing1 internal conical bearing1 sealed ringValid for one wheel. Attention do not mount on model 1958 to 60 with Ø 19 mm ...
(84,10 € HT)
Simca Chambord Ariane rear hub bearing kit
Rear hub kit (for 1 wheel) including:1 x sealed bearing (remove the inner side flange)1 x sealing ring (spi) outer side1 x waterproof ring (spinnaker) on the inner side of the deck.It is better to replace both sides at the same time.Mounts on ...
(39,29 € HT)
Simca V8 cylinder head screw set
Set of 34 black phosphated hexagonal head screws - 2 screw lengths in the set. Resists up to 6 m.kg
(138,80 € HT)
Simca Versailles 19mm rear brake cylinder kit
Complete repair kit for rear wheel cylinder in 19 mm. Supplied with pistons.
(34,00 € HT)
Simca Versailles Chambord air filter + breather sticker
Sticker for air filter and breather cap. Mounts on Simca V8 engine. Sticker
(19,26 € HT)
Simca Versailles Chambord disc clutch
Clutch disc reconditioned, in standard exchange for Simca Versailles, Chambord and derivates. Complete disassembly, micro balling and painting. (The sending is done after receipt of the used mechanism, not destroyed)(Depending on the year, ...
(120,00 € HT)
Simca Versailles Chambord gearbox supports
(102,80 € HT)
Simca Versailles Chambord oil pump pinion
Replacement pinion for oil pump - V8 Simca (Versaille, Chambord, etc.). Supplied with 4 rivets. (Advantageously replaces the celoron one which has become fragile over time). Attention for Ford Vedette 12hp 2150 cm3 V8s, choose the reference " ...
(187,00 € HT)
Simca Versailles Chambord water pump plate
Closing plate for water pump housing. Current manufacture in synthetic materials with carbon reinforcement - very solid - no corrosion possible. Mounts in place of the old one.For Simca Trianon, Versailles, Régence, station wagon Marly 1 and 2, ...
(75,00 € HT)
Simca Versailles rear wheel hub kit
" Rear hub repair kit for one wheel: Simca Trianon, Versailles, Régence, Marly 1 1 bearing 1 adapter spacer 1 depth wedge The shim and the spacer are placed towards the wheel, flat side of the bearing towards the center of the bridge (see photo n ...
(144,00 € HT)
Simca Versailles-Ariane trunk seal
Trunk seal for Simca Versailles, Ariane, Chambord etc.
(30,00 € HT)
simplified kit - for gasoline pump SEV - Renault Fregate Prairie Goelette Galion
Reduced repair kit for SEV D100mm fuel pump. Fitted on Renault Frégate Prairie Goelette Galion. Please check the brand of your pump before ordering
(29,90 € HT)
Sliding side door seal. - Peugeot D3 D4
Set of 2 windscreen gaskets for Peugeot D3 or D4.
(40,00 € HT)
Solenoid coil Rushmatic Simca Chambord Presidence
12v solenoid type actuator for Rushmatic. Supplied with connection wire, central rod and dust cover. Mounted on Rushmatic Simca (Rush-Matic)
(170,00 € HT)
Soles kit for handles and locks - Ford Vedette berline and Vendome
Soles kit for Ford Vedette berline and Vendôme. French manufacture by Techni-Tacot.Including:4 x soft soles for exterior door handles2 x soft soles for exterior door lock
(35,50 € HT)
solid copper cylinder head gasket 2 mm Simca Versailles Chambord
Solid copper cylinder head gasket. Thickness 2 mm. Used with planed cylinder head. For V8 Simca Trianon, Versailles, Régence, Beaulieu, Chambord, Présidence, Marly 1 and 2, Ariane 8. Also exists in 3mm version (available on the shop) Tightening ...
(160,40 € HT)
solid copper cylinder head gasket 3mm Simca Versailles Chambord
Solid copper cylinder head gasket. Thickness 3 mm. Used with very planed cylinder head. For V8 Simca Trianon, Versailles, Régence, Beaulieu, Chambord, Présidence, Marly 1 and 2, Ariane 8. Also exists in 2mm version (available on the ...
(192,00 € HT)
Soundproofing with adhesive 1m2
Sound insulation in heavy plates. Allows you to lower the sound level. Self-adhesive (film to be removed before installation). Plate 200 x 500 mm. The package contains 10 plates, i.e. 1 m2 in total
(72,80 € HT)
Spark plug extension x 4 - Citroen HY
Spark plug extension x 4 - Citroen HYGasoline engine from 1963 and end of series
(18,00 € HT)
Spark plug ignition with 18 mm base
NGK big base spark plug (18 mm), for cylinder head. Specially adapted to pre-war. Sold individually
(7,46 € HT)
Spark plug Motorcraft BRF 22 C x 4
4 x Motocraft AG 252 spark plugs-Ford Scorpio / Granada / Sierra ..See list on photos
(13,75 € HT)
Special brake grease tube - 5g
Tube of special braking grease (5gr), Lockheed DOT and silicone compatible, protects steel cylinder and piston parts, helps them slide, compatible with rubber parts.
(3,89 € HT)
Special brake grease tube - Plastilub ATE - 75 ml
Tube of special braking grease (75 ml). ATE's Plastilube is used to lubricate the guide faces on calipers and brake linings and to protect them against corrosion.Note: The friction surfaces of the brake pads must not be coated with ATE Plastilube!
(11,50 € HT)
Speedometer cable - lower part 175 cm - Citroen HY
Speedometer cable - lower part 175 cm - Citroen HY
(44,00 € HT)
Speedometer cable - Peugeot 203 - all models
Speedometer cable for Peugeot 203 convertible, sedan, commercial pick-up, all models (Non-contractual photo)
(45,00 € HT)
Speedometer cable - speedometer side 60 cm - Citroen HY
Speedometer cable - upper part 60 cm - Citroen HY
(30,00 € HT)
Spinnaker nose ring 38x78 special - Simca Marly
Sealing ring on bridge nose. Supplied with adapter ring.Special model for Simca MArlyApprox.38 x 78mm(Non contractual photo)
(45,20 € HT)
Spinnaker ring - the complete kit for Simca Versailles Chambord gearbox
Set of 4 rings for input, output and gearbox lever Simca Versailles Chambord
(30,62 € HT)
Spinnaker ring 40 x 57 x 10
(10,50 € HT)
Spinnaker ring on 1/2 rear shaft - Ford Vedette - Comete
Spinnaker ring on 1/2 rear shaft - Ford Vedette - Comete(to be mounted on the left and right side)
(15,33 € HT)
Spinnaker seal ring 38x73 - Simca Versailles Chambord
" Sealing ring on bridge nose. Supplied with adapter ring. About 38 x 73 mm (non contractual photo) "
(45,20 € HT)
Springs - set of 8 for front brake - Citroen HY - type H
Springs - set of 8 for front brake - Citroen HY - type HSet for 2 front wheels
(32,00 € HT)
Stainless heating steel T hose for Ford Vedette
Stainless steel T allowing the heating return to be connected to the lower main radiator hose. Ford Vedette, Vendôme or other vehicle using this system.
(30,00 € HT)
Stainless steel - cylinder head water tube - Renault Fregate, Prairie, R2087, Goelette
" Internal water pipe for cylinder head. Engine type 668, 671 (11 and 12hp), 817 (sg2 petrol) etc. Manufactured in stainless steel to eliminate corrossion problems. Supplied with assembly diagram. "
(33,25 € HT)
Stainless steel cylinder head tube Citroen Traction - HY - U23
Water tube for cooling cast iron cylinder head. Citroen Traction, HY, U23 and derivativesStainless steel construction
(19,50 € HT)
Stainless steel silencer - Citroën HY
(322,50 € HT)
Standard 6V coil ignition
Branded ignition coil guaranteed for use with 6 V platinum-plated igniter (breakers). Impedance respected to prevent the breakers from becoming blue. Also works perfectly with electronic module or integral electronic igniter.
(36,00 € HT)
STD bearing bush - Simca 9 - Aronde - 1951-568 - 1200 cm3
STD bearing bush - Simca 9 - Aronde - 1951-568 - 1200 cm3
(329,17 € HT)
STD bearing bush - Ø 45.00 - Simca Aronde Ariane 1300 - Flash
STD bearing bush - Ø 45.00 - Simca Aronde Ariane 1300 - Flash
(258,00 € HT)
STD bearing bush - Ø 47.87 - Simca Aronde Ariane RUSH 6 and 7 hp
Set of bearing bearings for crankshaft dimension STD - Ø 47.87 mmMounts on engine type 312 -316 -FLASH - RUSH 7CV - RUSH SUPER MFor vehicle:- Dovetail motor RUSH 6 or 7hp,- Ariane with RUSH and RUSH Super M engines,- SIMCA 1300 and 1301
(354,00 € HT)
STD connecting rod bearings - Ø 40mm - Simca 8 - 1200 cm3
connecting rod bearing STD - Ø 40mm - Simca 8 - 1200 cm3
(195,83 € HT)
STD segment set 85 mm 3x3x3x4.5 Renault Fregate
Set of 16 segments for 4 eyebolts dimension 85 mm - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 3 mm1 x scraper in 4.5 mmPossibility of ordering in 85 mm (call us)
(124,85 € HT)
STD segment set 88mm Renault Fregate 2x2x2x4.5
Set of 16 segments for 4 pistons Ø 88 mm dimension - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 2 mm1 x scraper in 4.5 mmPossibility to order in 85 mm (contact us)
(124,85 € HT)
STD segment set 88mm Renault Fregate 3x3x4.5x4.5
Set of 16 segments for 4 pistons Ø 88 mm dimension - 668 or 671 Renault petrol engine.composition per piston:2 x compression in 3 mm2 x scraper in 4.5 mmPossibility of ordering in 85 mm (call us)
(127,00 € HT)
Steering ball joint - Citroën HY type H
Steering ball joint - Citroën HY type H
(55,00 € HT)
Steering ball joints RIGHT side - Simca 9 - Aronde - P60
Steering ball joints (right side) - Simca 9 - Aronde - P60
(176,00 € HT)
Steering block Peugeot 203-403
Silent block at the end of the rack.int 12 mm, ext 30 mm
(6,50 € HT)
Steering gear on chassis - Simca Versailles - Chambord - Ariane
Steering gear on chassis - Simca Versailles - Chambord - Ariane
(214,00 € HT)
Steering rack - Renault Colorale
Silent block ("Diabolo") mounted on the steering gear side. Sold in pairs - Ø 100mm
(50,00 € HT)
Steering wheel center - badge - Simca Versailles Chambord
Steering wheel center - badge - Careful re-manufacture - Simca Versailles Chambord
(128,00 € HT)
sticker ford oil filter
Oil filter sticker. Mounts on Ford V8 Vedette, Vendôme, Comète, Monte Carlo etc.
(9,63 € HT)
sticker Simca oil filter
Sticker for oil filter and breather plug. Mounts on V8 engine
(9,63 € HT)
Stud + nut + washer for wheel - Simca 9 - Aronde - P60
(21,00 € HT)
SUMB Marmon disc clutch
Clutch disc reconditioned, in standard exchange for SUMB Marmon. Complete disassembly, micro balling and painting. (The sending is done after receipt of the used mechanism, not destroyed)(Depending on the year, non-contractual photo)
(116,00 € HT)
SUMB Marmon master cylinder plug kit
For Simca Sumb Mamon, Citroën U23 and other heavy goods vehicles.Kit of 3 caps + 3 copper gaskets for master cylinder.Depending on the model, order the set of 3 plugs + gaskets to close the unnecessary outlets.
(19,15 € HT)
Support between engine-gearbox - RenaultFrégate
Support between engine and gearbox for Renault Frégate. Mounts at the level of the apron. (1 only per vehicle)
(40,00 € HT)
Support de manomètre
Support métalique, laqué noir pour manomètre standard D52 mm. Prêt à fixé.
(7,94 € HT)
Suspension pivot Simca Versailles Chambord Ariane
Standard ball joint replacement for the lower suspension pivot. The arm is delivered with the ball joint mounted and ready for reassembly. Assembly for Trianon, Versailles, Régence, Marly 1 and 2, Beaulieu, Chambord, Présidence and Ariane. The ...
(352,00 € HT)
Tailor-made brake hose D13+7/16e male Long 400mm
Made-to-measure front or rear brake hose. A simple call will allow us to determine your type of hose and its length.Same price as a standard model. Citreon HY, type H, HZ, HW.Image not contractual.
(35,00 € HT)
Tailor-made front or rear brake hose
Tailor-made flexible front or rear fein. A simple call will allow us to determine your type of hose and its length.Same price as a standard model. Citroen HY, type H, HZ, HW.Non contractual image.
(29,50 € HT)
Tailor-made front or rear brake hose
Tailor-made flexible front or rear fein. A simple call will allow us to determine your type of hose and its length.Same price as a standard model. Citreon HY, type H, HZ, HW.Non-contractual image.
(29,50 € HT)
Tapered bearings kit + front hub spinnaker - Simca 6
Kit composed of:2 x tapered bearings1 x waterproof ring (sp)Allows to equip 1 front hub - Simca 6
(95,67 € HT)
Temperature manometer with probe - black background
Mano "OS" temperature indicator (without electrical connection). Direct reading by probe mounted on a radiator hose (high outlet). 52 mm recess on the pressure gauge side.Capillary 1m80. Delivered with lighting and probe for the hose.
(80,00 € HT)
Temperature manometer with probe - ivory background
Mano "OS" temperature indicator (without electrical connection). Direct reading by probe mounted on a radiator hose (high outlet). 52 mm recess on the pressure gauge side.Capillary 1m80. Delivered with lighting and probe for the hose.
(80,00 € HT)
Temperature sensor - engine 817 - Renault SG2
Temperature sensor - engine 817 - Renault SG2
(45,00 € HT)
THERMOSTABLE front brake cylinder - set of 4 - Peugeot 404
Set of 4 front brake cylinders Thermostable L or R - Peugeot 4041965 to 69
(166,25 € HT)
THERMOSTABLE front brake cylinder - set of 4 - Peugeot 404
Set of 4 front brake cylinders Thermostable L or R - Peugeot 4041965 to 69
(468,00 € HT)
Thermostable rear brake cylinder Ø 17.50 mm - Peugeot 404
Rear wheel cylinder Thermostable L or R Ø 17.50 mm - Peugeot 4041965 at the end of production
(20,00 € HT)
Thermostable rear brake cylinder Ø 19.00 mm - Peugeot 404
Rear wheel cylinder L or R Ø 19 mm. Liquid inlet 3/8 - French manufacturing
(46,30 € HT)
Thermostat - calorstat - Peugeot 203 403 404 utility D3 D4
Thermostat - calorstat - Peugeot 203 403 404 utility D3 D4
(17,50 € HT)
Thermostat - Simca Aronde P60
Thermostat for cooling circuit - Simca Aronde P60 - engin Flash or Rush
(16,00 € HT)
Thermostatic spring on Renault Prairie manifold
Thermostatic spring to be mounted on the exhaust manifold. For Renault Frégate, R2087; Goélette, Colorale, Prairie and derivatives etc.
(38,33 € HT)
Tie rod ends - Ford Vedette
Set of steering ball joints for Ford Vedette 1949 to 54, Abeille, Vendôme, Comète, Monte Carlo.Includes:- 1 x long ball joint,- 1 x short ball joint.(the adjusting sleeve is not supplied)
(169,20 € HT)
Tie rod with steering ball joints - Simca Versailles Chambord
Tie rod with steering ball joints - Simca Versailles, Chambord and derivatives. Does not fit on Ariane:- 2 x ball joints + mounted bar.Please note this product is in standard exchange.
(210,00 € HT)
Tige culbuteur pour moteur type Frégate
(22,00 € HT)
Top and bottom seals for 2 front doors. - Peugeot D3 D4
Top and bottom seals for 2 front doors. - Peugeot D3 D4
(58,00 € HT)
Top seal on Ford Vedette apron
Gasket to be glued to the top of the apron and allowing sealing with the cover (close to the windshield), length approximately 1.50m. Dimensions 10x20 mm
(9,00 € HT)
Transmission spider wheel side - Renault Frégate all models
Wheel side transmission spider - Renault Frégate all models Sold individually with grease nipple.
(50,00 € HT)
Transparent flashing light - Citroen HY
Transparent light - without lamp - Citroën HY
(22,00 € HT)
Trunk seal - Peugeot 203 sedan 4p
Trunk or trunk seal - Peugeot 203 sedan 4p
(24,08 € HT)
Trunk seal Simca Versaille Ariane Chambord
Trunk seal for Simca Versailles, Ariane, Chambord etc.
(30,00 € HT)
Turbine water pump 60 mm - pulley 112mm - Renault Fregate, Prairie, Goelette, R2087, ...
Water pump complete with Ø 112 pulley for 17mm belt - is mounted on tumbled engine 668 or 671 Renault Frégate, Prairie, Colorale, R2087, Goélette, Galion, SG2 12cv, and derivatives. Ø 60 mm (cannot be mounted on type 817 - 2.6L engine). The pump ...
(240,00 € HT)
Turbine water pump 70 mm - pulley 112mm - Renault Tp3 SG2
Complete water pump for engine type 817 - 2.6L. The pump is delivered with its seal as in the photo.
(240,00 € HT)
U23 bridge entry seal kit
(42,00 € HT)
Upper front cylinder L or R - Peugeot 404 ALL model except Thermostable
Single piston cylinder with bleeder for front wheel - Ø 28.57 mm - Peugeot 404 ALL model except Thermostable - Upper left or right mounting - (2 upper cylinders and 2 lower cylinders are needed to equip the front) - French manufacture - NON ...
(51,25 € HT)