Front brake cylinder 31.75 mm - SAMBRON
Front brake cylinder - Ø 31.75 mm - Sambron
(69,50 € HT)
Adapter connection 7/16 male - 3/8 female
Adaptateur freinage mâle 7/16 (envion 11mm) femelle 3/8
(17,50 € HT)
Master cylinder kit 38.1 mm - Renault Galion
Repair kit for 38.1 mm master cylinder.
(74,75 € HT)
Brake cylinder 28.5mm - entry 11mm (7/16th) - Peugeot Q3A
Brake cylinder 28.5mm - entry 11mm (7/16th) -
(65,00 € HT)
Remise en état lot de pièces spécifiques
(90,00 € HT)
segment set 85 mm 2x2x2x4x4 Renault Fregate
Set of 20 segments for 4 eyebolts dimension 85 mm - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 2 mm2 x scraper in 4 mmPossibility of ordering in 85 mm (call us)
(138,00 € HT)
copy of Oil pressure contact mano - Ford Vedette 1949 - 54
oil pressure switch for Ford Vedette engine from 1949 to 1954 - Thread M 10x100
(10,50 € HT)
Best Sellers
Ignition capacitor 6, 12 and 24V
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Rear brake cylinder 28.57 mm - 1 1/8 Renault Colorale, Prairie, R2087, Goelette
" Rear wheel cylinder. Diam: 1" "1/8 or 28.6 mm. Liquid inlet diameter = 11.4 mm (1/2 20 f / p) Renault Colorale, Prairie, R2087, Goélette, 1000 kg, 1400 Kg and derivatives . "
(75,35 € HT)
Front brake cylinder kit 34.9 mm - 1 3/8 Renault Prairie R2087 Goelette
Repair kit for AV cylinder. d 34.93 mm
(16,00 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,35 € HT)
Ignition - 4 x Spark plugs for Renault Fregate
Set of 4 NGK spark plugs with std base (14 mm), Renault Fregate, Colorale, Prairie engine (side engine 603 and tumbled 668 or 671), R2087, Goélette, Galion, SG2 gasoline (engine 671 or 817) etc. Compatible with SP95 and SP98 fuels
(20,00 € HT)
Best sellers There are 1559 products.
Segment set Simca 5 - 52.50 mm 2x2x2x3
Set of 16 segments (4 per piston) - Cylinder bore 52.50 mmComposition:12 waterproof segments, 2 mm high4 scraper segments 3mm high. Non contractual photo.Other dimensions available, contact us to define the height of each segment.
(132,20 € HT)
Set of segments STD 85.50, oversize 0.50 mm Renault Fregate
Set of 16 segments for 4 pistons, special dimension 85.50 mm reaming - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 3 mm2 x scraper in 4.5 mmPossibility of ordering in 85 mm (call us)
(133,25 € HT)
jauge occasion
(160,00 € HT)
Head gasket (2-stage engine) - Peugeot 201
Head gasket (2-stage engine) - Peugeot 201
(133,33 € HT)
solid copper cylinder head gasket 2 mm Simca Versailles Chambord
Solid copper cylinder head gasket. Thickness 2 mm. Used with planed cylinder head. For V8 Simca Trianon, Versailles, Régence, Beaulieu, Chambord, Présidence, Marly 1 and 2, Ariane 8. Also exists in 3mm version (available on the shop) Tightening ...
(160,40 € HT)
Head gasket 2 mm solid copper Ford Vedette
Solid copper cylinder head gasket. 2mm thickness. Used with planed cylinder head. Tightening to 5m.kg. Mandatory installation with aerosol sealant, available here a>. Measured cylinder head thickness Head gasket type 37.3 mm ...
(160,40 € HT)
Set of 4 rear brake shoes 203 UtilityU8 Peugeot
Set of 4 rear brake shoes - standard exchange. (Send us your set before shipping the new one). High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes.
(135,00 € HT)
New connecting rod for mounting with bearing - Citroen HY engine ID19
New connecting rod for assembly with bearing - Citroen Traction 11hp and 15hp and HY engine ID 19 current 63 and end of series.Supplied without pad. It is advisable to replace all 4 connecting rods at the same time.
(135,00 € HT)
Segment set Ø 78 mm Citroen HY 2 x 2.5x4x4 - 4cyl
Segment set Ø 78 mm Citroen Traction 2.5x2.5x4x4 - 4cyl
(135,00 € HT)
Segment set Ø 78 mm Citroen Traction U23 HY 3x3x3x4.5 - 4cyl
Segment set Ø 78 mm Citroen Traction 3x3x3x4.5 - 4cyl
(135,00 € HT)
Connecting rod bearings set - Peugeot 203 - Peugeot D3 D4 standard dimension
Set of bearings for 4 Peugeot D3 D4 connecting rodsStandard origin dimension. French made.
(135,00 € HT)
Set of 4 relined front brake shoes from Simca Versailles
Set of 4 relined brake shoes (Front) for Simca V8 in standard exchange. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets which can damage the drums.Shipping upon receipt of worn parts.
(135,00 € HT)
Clutch disc - Citroen B14
Clutch disc Citroen B14.Standard exchange product - reconditioned in France
(137,42 € HT)
Pair of front brake cylinders 28.5mm - Panhard 24 - 07/1964 to the endnch nov 57 a end
2 x front wheel cylinder left and right - d 28.57 mm. 3/8 entry Left side mounting. Length 72 mm - inside liquid passage = 8.5 mm. Assembly:
(137,80 € HT)
Front brake cylinders x2 28.5mm - Simca Aronde 500 kg P60 Ranch nov 57 a end
Front wheel cylinder R - d 28.57 mm. 3/8 entry Left side mounting. Length 72 mm - inside liquid passage = 8.5 mm. Assembly:- Simca Aronde 500kg nov 57 to 05/62,- Simca P60 500kg and Ranch 12/59 at the end.
(137,80 € HT)
Front brake cylinders x2 - 28.5mm -Simca Aronde P60 nov 57 a end
Front wheel cylinder R - d 28.57 mm. Entry 3/8 Left mounting. Length 72 mm - inside liquid passage = 8.5 mm.Aronde and P60 from nov 57 end to end of series
(137,80 € HT)
segment set 85 mm 2x2x2x4x4 Renault Fregate
Set of 20 segments for 4 eyebolts dimension 85 mm - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 2 mm2 x scraper in 4 mmPossibility of ordering in 85 mm (call us)
(138,00 € HT)
copy of Set of segments STD 85.50, oversize 0.50 mm Renault Fregate
Set of 16 segments for 4 pistons, special dimension 85.50 mm reaming - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 3 mm2 x scraper in 4.5 mmPossibility of ordering in 85 mm (call us)
(138,00 € HT)
Bearing bearings 53.50mm - dimension 0.50 - without cheek - Citroen HY
Bearing bearings dimension 0.50 -For HY H72 or H78 engine
(138,00 € HT)
Segment set Ø 67.50 mm Simca Chambord 2 x 2 x 5 - 8cyl
Segment set Ø 67.50 mm Simca 2 x2 x 5 - 8cyl
(167,00 € HT)
Set of 4 Renault Fregate front brake shoes
Set of 4 rear brake shoes in standard exchange. (Send us your game before shipping the new one). High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes.Width 67mm x 280mm
(140,00 € HT)
Tie rod ends - Ford Vedette
Set of steering ball joints for Ford Vedette 1949 to 54, Abeille, Vendôme, Comète, Monte Carlo.Includes:- 1 x long ball joint,- 1 x short ball joint.(the adjusting sleeve is not supplied)
(169,20 € HT)
Jeu de 16 segments Ø72.50 mm - 2.5 x 2.5 x 2.5 x 4
(141,58 € HT)
Valve guide - set of 4 - Simca Chambord Versailles
set of 4 valve guides - Simca Chambord Versailles - Aquilon 2350 cc engine - 80 and 84 hpNew period parts and checked.
(172,00 € HT)
Engine gasket kit Peugeot D4A D4B 8cv engine
Peugeot D4A and D4B gasket set with 8hp engine, 80 mm bore. Includes cylinder head gasket, liner base gasket, collector gasket, etc.
(145,00 € HT)
Copper cylinder head gasket - Citroen trefle 5HP
Copper cylinder head gasket - Citroen trefle
(145,00 € HT)
main bearings 53.75mm - dimension 0.25 - without cheek - Citroen HY
main bearings dimension 0.25 -For HY H72 or H78 engine
(145,00 € HT)
Carburetor similar to the Solex 32 PBIC Traction Citroen type
New carburettor similar to the Solex 32 PBIC type. Vacuum outlet on foot base. Configuration for Citroen TractionNozzle 26 - Main jet 135 and automatic nozzle 190 - Emulsion19 - Idle 50 - idle air 130 - Needle 1.5 - Float 12.5 gr - Accelerator ...
(163,07 € HT)
Set of 4 relined front brake shoes Citroen U23
Set of 4 relined brake shoes (Front) in standard exchange for Citroen U23. Microblasting, varnish, industrial bonding of friction. Strong adhesion.Eliminates the problem of rivets that could damage the drums. Shipping upon receipt of worn ...
(145,00 € HT)
Coupling rod with ball joints - Simca 9 - Aronde - P60
Coupling rod with ball joints - Simca 9 - Aronde - P60Comes with a left ball joint and a right ball jointThis more reliable assembly avoids having to replace the 2 rubber silent blocks.
(176,00 € HT)
Steering ball joints RIGHT side - Simca 9 - Aronde - P60
Steering ball joints (right side) - Simca 9 - Aronde - P60
(176,00 € HT)
LEFT side steering ball joints - Simca 9 - Aronde - P60
Steering ball joints (left side) - Simca 9 - Aronde - P60
(176,00 € HT)
Répartiteur frein - Renault SG2
(176,00 € HT)
Engine gaskets kit with cylinder head gasket Renault 817 SG2
Engine gaskets kit with cylinder head gasket Renault 817 SG2
(176,00 € HT)
Set of 4 SUMB Marmon brake shoes
" Set of 4 relined brake shoes, in standard exchange. (Send us your set before shipment of the new one) High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes. (non ...
(176,00 € HT)
Valves x 4 - ADM ECH Ø 32x8.5x129.7 - Citroen B2 B12 B14
Set of 4 ADM or ECH valves - Ø 32x8.5x129.7 - Citroen B2 B12 B14
(147,00 € HT)
Bearings 54.00mm - STD dimension - without cheek - Citroen HY
Bearing bearings dimension 50.00 (STD) -For ID 19 engine and similar engine block
(148,00 € HT)
Joint de culasse pour Citroën B14 G (375/172)
Joint de culasse pour Citroën B14 G (375/172)
(149,00 € HT)
Engine gaskets set with cylinder head gasket - Renault 668/671
Engine gaskets kit (top and bottom) Renault type 668 and 671 (11 and 12hp) (Colorale, Goélette, R2087, Frégate, etc). Includes gaskets for:- cylinder head, rocker cover, 8x valve stem, 2 on central oil tee, tappet housing, 2 x ADM / ECH,- water ...
(149,17 € HT)
Bearing clutch: replacement bearing - Ford Anglia
Bearing for thrust ball - clutch Ford Anglia. Non contractual photo.
(156,97 € HT)
6 CYL ENGINE KIT - CITROEN TRACTION 15 CV
Complete engine gasket set, including cylinder head gasket for Citroën Traction 15.
(149,92 € HT)
Set of segments Ø 69.50 mm - 3x2.5x2.5x4
Segment set Ø 69 mm to equip 4 pistons with 4 grooves:- 3x2.5x2.5x4Non contractual photo
(149,96 € HT)
Set of 20 segments Ø 68 mm - 2.5x2.5x2.5x5x5
Segment set Ø 68 mm to equip 4 pistons with 5 grooves:sets each comprising 3 compression segments 2.5 mm + 2 oil scraper segments 5 mm.Non contractual photo
(149,96 € HT)
Rear window seal Simca Versailles - Ariane
Rear window seal - Simca Trianon Versailles Régence Ariane Marly 1
(149,96 € HT)
joint de culasse rosalie 8cv
(150,00 € HT)
Pignon distribution céloron 52d - moyeu 38mm - neuf stock d'époque - Renault moteur 603
Pignon distribution céloron 52 dents - alésage 38 mm - neuf stock d'époque - Renault moteur 603 14cv ("85 latéral"). Ne convient pas aux moteurs culbuté 668, 671 et 817
(180,00 € HT)
Set of 4 front brake shoes 55 mm - HY or type H Citroen - 02/1962 to 1981
Set of 4 front brake shoes 55 mm - HY or type H Citroen - 02/1962 to 1981 - standard exchange. (Send us your set before shipping the new one). High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled ...
(150,00 € HT)
Segment set Ø 75 mm Peugeot 203 403 - 7cv - 2.5x2.5x2.5x4.5x4.5
Segment set Ø 75 mm Peugeot 203 403 - 7cv4 x sets each comprising 3 2.5 mm compression rings + 2 4.5 mm oil scraper rings.Non contractual photo
(150,00 € HT)
Connecting rod bearings set - Peugeot 203 - 403 dimension 0.30
Set of bearings for 4 Peugeot 203 and 403 connecting rods.Repair dimension 0.30. French made.
(150,00 € HT)
Rosengart LR6 cylinder head gasket
Cylinder head gasket for LR6 engine and other 6 cylinders Rosengart.
(150,00 € HT)
Set Segments Ø 58.00 2x2x3 - Rosengart LR (set of 12)
Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 58. Attention in case of error on your part, these products cannot be taken back.- 8 x compression h 2mm- 4 x scraper h 3 mmContact us for other sizes.
(150,98 € HT)
Citroen HY engine kit - H72 - H78
Seal kit for Citroen H, HY, HW equipped with H72 type engine 72 or 78 mm bore. from 1963 to 82 - Detail of the cylinder head gasket by clicking on the 2nd photo. (cylinder head and cylinder head cover in aluminum - engine similar to that of ID ...
(153,00 € HT)
Bearing (4x4 version) front outer hub - Renault Prairie R2087 Goelette
Front hub bearing (external) for Renault 4x4 Colorale, R2087, Goélette etc.1 per side of the wheel (i.e. 2 per vehicle)Be sure to check the dimensions BEFORE orderingOverall dimensions: 42.86 x 82.55 x 19.84 / 15.08
(153,00 € HT)
Rear brake cylinder 44.4 mm - Renault Galion1p 3/4 -
For Renault Galion 2t5 and other derivatives in heavy vehicle version.Wheel cylinder inner diameter 44.5 mm or 1 3/4 inch.Liquid inlet 1/2 20F / P
(153,50 € HT)
Valves x 6 - ADM 30° Ø 37x9x138 - Citroen P34 P36 10cv
Set of 6 ADM valves 30 ° - Ø 37x9x138 - Citroen P34 P36 10cv
(154,52 € HT)
valves x 4 - Ø30x8x108 - exhaust - Simca 8 - 1200
valves x 4 - Ø30x8x108 - exhaust - Simca 8 - 1200
(155,00 € HT)
valves x 4 - Ø32x8x105 - intake - Simca 8 - 1200
valves x 4 - Ø32x8x105 - intake - Simca 8 - 1200
(155,00 € HT)
Set of Gaskets engine Aquilon - Simca Versailles Chambord
Seal kit produced according to Techni-Tacot requirements. Fit to Simca Versailles, Régence, Trianon, Beaulieu, Chambord, Présidence, Ariane 8 and Marly V8 engines. Contains all the gaskets (2 cylinder head gaskets 1.6 mm thick, water pump, ...
(155,00 € HT)
Set of 4 relined front brake shoes Simca Chambord
" Set of 4 relined brake shoes (Av) for Simca V8 in standard exchange. Microblasting, varnish, industrial friction bonding. Strong adhesion. Eliminates the problem of rivets which can damage the drums. Shipping upon receipt of worn parts. "
(155,00 € HT)
Ford Vedette oil pump pinion
Replacement gear for oil pump - V8 Ford Vedette. Supplied with 4 rivets. (Advantageously replaces the celoron one that has become fragile over time)Attention for the V8 Simca 13 hp 2350 cm3, choose the reference "Simca oil pump pinion" on our shop.
(187,00 € HT)
Simca Versailles Chambord oil pump pinion
Replacement pinion for oil pump - V8 Simca (Versaille, Chambord, etc.). Supplied with 4 rivets. (Advantageously replaces the celoron one which has become fragile over time). Attention for Ford Vedette 12hp 2150 cm3 V8s, choose the reference " ...
(187,00 € HT)
Segment set Ø 81.27 mm - 2.38 x 2.38 x 5 - SUMB MARMON
Segment set Ø 81.27 mm - 2.38 x 2.38 x 5 - SUMB MARMONor 24 segments in all. It is essential to check the cutting clearance.
(156,00 € HT)
Ring set Ø 66.50 mm Simca 2.50x2.50x4 - 8cyl
Ring set Ø 66.50 mm Simca 2.50x2.50x4 - 8cyl
(156,00 € HT)
Ring set Ø 67.50 mm Simca Chambord 2.38x2.38x5 - 8cyl
Ring set Ø 66.04 mm Simca 2.38x2.38x5 - 8cyl
(156,00 € HT)
Segment set Ø 81 mm - 2.38 x 2.38 x 5 - SUMB MARMON
Segment set Ø 81 mm - 2.38 x 2.38 x 5 - SUMB MARMONor 24 segments in all. It is essential to check the cutting clearance.
(156,00 € HT)
Segment set Ø 67.00 mm Simca Chambord 2.38x2.38x4 - 8cyl
Segment set Ø 67.00 mm Simca 2.38x2.38x4 - 8cyl
(156,00 € HT)
Segment set Ø 66.50 mm Simca 2.38x2.38x5 - 8cyl
Segment set Ø 66.50 mm Simca 2.38x2.38x5 - 8cyl
(156,00 € HT)
valve x 4 - Ø29x8x107 - Simca Aronde Ariane exhaust Flash engine
valve x set of 4 - Ø 29 x 8 x 107 - exhaust - Simca Aronde P60 Ariane Flash engine
(156,25 € HT)
valve x 4 - Ø31x8x107 - intake Simca Aronde Ariane flash engine
valve x set of 4 - Ø 31 x 8 x 107 - intake Simca Aronde P60 Ariane flash engine
(156,25 € HT)
valve x 4 - Ø30x8x112 - Simca Aronde Ariane exhaust Rush engine
valve x set of 4 - Ø 30 x 8 x 112 - exhaust - Simca Aronde P60 Ariane Rush engine
(156,25 € HT)
valve x 4 - Ø32x8x112 - intake Simca Aronde Ariane Rush engine
valve x set of 4 - Ø 32 x 8 x 112 - intake Simca Aronde P60 Ariane Rush engine
(156,25 € HT)
Set of segments Ø 69 mm - 2.5x2.5x2.5x3.5
Segment set Ø 69 mm to equip 4 pistons with 4 grooves:- 2.5x2.5x2.5x3.5Non contractual photo
(156,30 € HT)
Segment set Simca 5 - 52 mm (4 sealed / 1 scraper)
Set of 20 segments (5 per piston).Composition:Cylinder bore 52.50 mm16 waterproof segments, 2 mm high4 scraper segment height 3mmOther dimensions available, contact us.
(158,00 € HT)
kit de reparation servofrein Hydrovac Ø 185 mm - Peugeot 404, Renault R8, Saviem
Hydrovac Ø 185 mm brake servo repair kit - Supplied with valve and residual valve.Peugeot 404, Renault R8, Saviem.
(158,33 € HT)
Citroën Traction rear shock absorbers
Set of 2 RECORD shocks - Rear mounting Citroen Traction
(158,50 € HT)
Front shock absorbers Simca Aronde 51 a 58
Front shock absorbers for Simca Aronde from 1951 to 1958 (spring leaves)Record brand, 100% conforms to the original assembly.Price of the pair.
(158,50 € HT)
Rear shock absorbers Simca Aronde 51 to 58
Rear shocks for Simca Aronde from 1951 to 1958 (spring leaves)Record brand, 100% conforms to the original assembly.Price of the pair.
(158,50 € HT)
Rear shocks Simca Versailles Ariane Chambord
Rear shock absorbers for Simca Trianon, Versailles, Régence, Marly 1 and 2, Beaulieu, Chambord and Présidence.Record brand, 100% conforms to the original assembly.Price of the pair.
(158,50 € HT)
Rear shock absorbers Peugeot 403 - except pickup
Rear shock absorbers Peugeot 403 - except pickupRecord brand, 100% conforms to the original assembly.Price of the pair.
(159,00 € HT)
Carburetor 32 PBICA - Peugeot 403 and 404
Carburateur neuf type Solex 32 PBICA. Se monte sur Peugeot 403 404. Selon modèle ajuster gicleurs, buse et réglages
(160,00 € HT)
Segment set Ø 66.04 mm Simca Chambord 2.38x2.38x5 - 8cyl
Segment set Ø 66.04 mm Simca 2.38x2.38x5 - 8cyl
(160,00 € HT)
solid copper cylinder head gasket 3mm Simca Versailles Chambord
Solid copper cylinder head gasket. Thickness 3 mm. Used with very planed cylinder head. For V8 Simca Trianon, Versailles, Régence, Beaulieu, Chambord, Présidence, Marly 1 and 2, Ariane 8. Also exists in 2mm version (available on the ...
(192,00 € HT)
Set of 4 relined rear brake shoes Renault Colorale Prairie, Goelette, R2087
Set of 4 rear brake shoes relined in standard exchange for Renault Prairie, Colorale, R2087, Goélette and derivatives. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets that could damage the ...
(160,00 € HT)
Set of 4 relined front brake shoes for Renault Galion
Set of 4 relined brake shoes (Front) in standard exchange for Renault Galion. Microblasting, varnish, industrial bonding of friction. Strong adhesion.Eliminates the problem of rivets that could damage the drums. Shipping upon receipt of worn ...
(160,00 € HT)
Head gasket solid copper 3 mm Ford Vendome Comete
Solid copper cylinder head gasket. Thickness 3mm. Used with very planed cylinder head. Mounts on Ford Vendôme, Comète, V8 21 and 22 hp.Tightening at 5m.kg. Installation with aerosol sealant is imperative.
(192,00 € HT)
Head gasket 3 mm solid copper Ford Vedette
Solid copper cylinder head gasket. Thickness 3mm. Used with very planed cylinder head.Tightening at 5m.kg. Pose impérative avec le produit d'étanchéité en pâte pour les joint de culasse 2 ou 3 mm disponible ici.Cylinder head thickness measured ...
(192,00 € HT)
Set of 4 relined front brake shoes Renault Colorale Prairie, Goelette, R2087
Set of 4 front brake shoes relined in standard exchange for Renault Prairie, Colorale, R2087, Goélette and derivatives. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets that could ...
(160,00 € HT)
Segment set Simca 5 - 53.50 mm 2x2x2x2x3
Set of 20 segments (5 per piston).Composition:Cylinder bore 53.50 mm16 waterproof segments, 2 mm high4 scraper segment height 3mmOther dimensions available, contact us.
(160,10 € HT)
Hydraulic clutch transmitter + receiver kit + connecting tube - Peugeot 404 injection
Hydraulic clutch transmitter + receiver kit + connecting tube - Peugeot 404 injection 1967 and end of series
(162,49 € HT)
Carburetor similar to the Solex 32 PBIC type
New carburettor similar to the Solex 32 PBIC model with accelerator pump. Vacuum outlet on foot base. Depending on the vehicle model, you will need to reset the configuration with the old starter, jets, cap or cover and throttle control
(163,07 € HT)
Carburateur similaire au type Solex 34 PBIC Traction Citroen et ID 19
Carburateur neuf type Solex 34 PBIC. Prise de dépression sur embase de pied. Configuration pour Citroen Traction - ID 19 Buse 27 - Gicleur principal 140 et ajutage automaticité 165 - Emulsion19 - Ralenti 50 - air ralenti 130 - Pointeau 1.5 - ...
(165,00 € HT)
Connecting rod bearings set - Peugeot 203 - 403 dimension 0.50
Set of bearings for 4 Peugeot 203 and 403 connecting rods.Repair dimension 0.50. French made.
(165,00 € HT)
THERMOSTABLE front brake cylinder - set of 4 - Peugeot 404
Set of 4 front brake cylinders Thermostable L or R - Peugeot 4041965 to 69
(166,25 € HT)
Exhaust - silencer Citroen U23
Exhaust (silencer) with outlet elbow, for Citroen U23.
(166,63 € HT)
joint pare brise Anglia
(200,00 € HT)
Master cylinder Ford Vedette 25.4 mm - 1950-54 - Vendome Comete
" Ford Vedette d25.4 mm master cylinder - all models 1950 to 1954, Comète, Monte Carlo, Abeille, Vendôme. Attention special model for year 1949, also available in our shop. Delivered complete with bellows. "
(167,35 € HT)
Kit 2 x Ford Vedette pivots
" Ford Vedette front pivot repair kit for all models, Bee, Comet, Monte Carlo, Vendôme. Includes 2 pins and 4 bronze bushings. (for 2 wheels). The 2 axes are in treated steel for a much greater hardness than ordinary commercial products. ...
(202,60 € HT)
Master cylinder 38.1 mm - Citroen U23
Fit to Citroen U23 and other derivatives. Fixing 3 symmetrical holes. Complete master cylinder. d 38.1 mm. 3-hole fixing. 3 side outlets and 1 at the end.Depending on the model, order the set of 3 plugs + gaskets to close the unnecessary outlets. ...
(169,00 € HT)
Master cylinder SUMB Marmon
For Simca SUMB Marmon, Citroën U23 and other heavy goods vehicles.Complete master cylinder. 3-hole fixing. 3 side outlets and 1 at the end.Depending on the model, order the set of 3 plugs + gaskets to close the unnecessary outlets.Warning: ...
(169,00 € HT)
Master cylinder Renault Galion, 1400 kg
For Renault Galion, 1400 kg and other heavy goods vehicle derivatives. Complete master cylinder. d 38.1 mm. 3-hole fixing. 3 side outlets and 1 at the end.Depending on the model, order the set of 3 plugs + gaskets to close the unnecessary ...
(169,00 € HT)
Wooden steps - pair - Renault Goelette R2087 Galion voltigeur
Set of 2 wooden steps - (left + right) - Quality manufacturing by carpenter - doweling and gluing - multi-layer varnishing - Ash wood- Renault Goelette 2087 Aerobatic galleon
(203,00 € HT)
Windscreen seal Ford Vedette 1949/52 - with central pillar
Welded windscreen seal - with central upright - for Vedette 1949 to 52. Photo no contractual
(170,00 € HT)
Windscreen seal Simca Versailles - Ariane
Windshield seal Simca Trianon Versailles Régence Ariane Marly 1
(170,00 € HT)
Solenoid coil Rushmatic Simca Chambord Presidence
12v solenoid type actuator for Rushmatic. Supplied with connection wire, central rod and dust cover. Mounted on Rushmatic Simca (Rush-Matic)
(170,00 € HT)
Set of 2 heads for Simca Versailles Chambord Ariane
Set of 2 steering ball joints to equip one side of the front train - Simca Versailles, Chambord, Ariane and derivatives. Includes:- 1 x long ball joint,- 1 x short ball joint,(the adjusting sleeve is not delivered - allows one side of the front ...