Front brake cylinder 31.75 mm - SAMBRON
Front brake cylinder - Ø 31.75 mm - Sambron
(69,50 € HT)
Adapter connection 7/16 male - 3/8 female
Adaptateur freinage mâle 7/16 (envion 11mm) femelle 3/8
(17,50 € HT)
Master cylinder kit 38.1 mm - Renault Galion
Repair kit for 38.1 mm master cylinder.
(74,75 € HT)
Brake cylinder 28.5mm - entry 11mm (7/16th) - Peugeot Q3A
Brake cylinder 28.5mm - entry 11mm (7/16th) -
(65,00 € HT)
Remise en état lot de pièces spécifiques
(90,00 € HT)
segment set 85 mm 2x2x2x4x4 Renault Fregate
Set of 20 segments for 4 eyebolts dimension 85 mm - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 2 mm2 x scraper in 4 mmPossibility of ordering in 85 mm (call us)
(138,00 € HT)
copy of Oil pressure contact mano - Ford Vedette 1949 - 54
oil pressure switch for Ford Vedette engine from 1949 to 1954 - Thread M 10x100
(10,50 € HT)
Rear brake cylinder 19mm - 3/8 Panhard 24 - 07/1964 to end
Rear wheel cylinder 19mm - Panhard 24 équipé frein à tambours - 07/1964 à fin de série
(57,60 € HT)
Best Sellers
Ignition capacitor 6, 12 and 24V
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Rear brake cylinder 28.57 mm - 1 1/8 Renault Colorale, Prairie, R2087, Goelette
" Rear wheel cylinder. Diam: 1" "1/8 or 28.6 mm. Liquid inlet diameter = 11.4 mm (1/2 20 f / p) Renault Colorale, Prairie, R2087, Goélette, 1000 kg, 1400 Kg and derivatives . "
(75,35 € HT)
Front brake cylinder kit 34.9 mm - 1 3/8 Renault Prairie R2087 Goelette
Repair kit for AV cylinder. d 34.93 mm
(16,00 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,35 € HT)
Ignition - 4 x Spark plugs for Renault Fregate
Set of 4 NGK spark plugs with std base (14 mm), Renault Fregate, Colorale, Prairie engine (side engine 603 and tumbled 668 or 671), R2087, Goélette, Galion, SG2 gasoline (engine 671 or 817) etc. Compatible with SP95 and SP98 fuels
(20,00 € HT)
Best sellers There are 1559 products.
Pistons liners kit Ø 54.50 base 62.50 Renault 680.01 - 02 - 747 cm3 4cv
Pistons liners kit Ø 54.50 base 62.50 Renault 680.01 - 02 - 747 cm3 4cv
(275,00 € HT)
Pistons liners kit Ø 54.50 base 60 Renault 680.01 and -02 - 747 CM3 4CV
Pistons liners kit Ø54.50 base 60 Renault 680.01 and -02 - 747 CM3 4CV
(275,00 € HT)
Shock absorber x 2 - FRONT - Renault Goelette
Pair of front telescopic shock absorbers (Record) for Renault Goélette.Lengths: measurement taken at the base of the cartridge top and bottom, this is not the total length: 280/470 mm
(272,00 € HT)
Kit of 3 camshaft rings + installation tool - Renault fregate prairie Goelette engine 671
Kit 3 camshaft bushes and installation tool- Renault Frégate Prairie Goelette engine 671 standard dimension
(325,80 € HT)
Kit 3 camshaft bushes x 3 - Ford Vedette
Kit 3 camshaft bushes x 3 - Ford Vedette 12hp engine
(325,80 € HT)
Rod bearings Renault Goelette Fregate dimension 0.50 - 54.50 mm
Set of 8 connecting rod bearings (with lubricating hole for the connecting rod) dimension 0.25 crankpin d 44.50 mm - Renault, Colorale, Goélette, R2087, Frégate, SG2, etc).Mounts on engine 668 - 11cv - 2L, 671 - 12cv - 2.2 L and Super Etendard ...
(267,50 € HT)
Rod bearings Renault Goelette Frégate dimension 0.25 - 54.75 mm
Set of 8 connecting rod bearings dimension 0.25 crankpin d 54.75 mm - Renault, Colorale, Goélette, R2087, Frégate, Sg2, etc).668 and 671 engine and super standard 817 - 2.6 L
(267,50 € HT)
Clutch mechanism type 3 - fits to clutch disq using springs - Citroen HY
Clutch mechanism reconditioned, in standard exchange mounted on HY engine (aluminum cylinder head).Complete disassembly, micro balling, surfacing and retaring of the pressure plate.(The sending is done after receipt of the used mechanism, not ...
(265,00 € HT)
Aluminum timing gear - Ford Vedette
Aluminum distribution sprocket - Ford Vedette 1949 to 54 and Comète 12cv - Advantageously replaces the Celoron one. Silent teeth - Timing mark engraved on the external face as at the origin. Neat French manufacturing.
(313,80 € HT)
Water pump 4 outlets - Renault Dauphine
Water pump 4 outlets - Renault DauphineDelivered with the pulley with 4 fixing
(260,00 € HT)
Kit 3 camshaft bushes x 3 - Simca Versailles Chambord - Aquilon engine
Set of 3 camshaft bushes standard dimension for Aquilon Simca Versailles Chambord engine.Delivered with the tool.
(312,00 € HT)
Radiateur neuf à partir de 1955 - Peugeot 203 - 403 - sans échange
(310,00 € HT)
STD bearing bush - Ø 45.00 - Simca Aronde Ariane 1300 - Flash
STD bearing bush - Ø 45.00 - Simca Aronde Ariane 1300 - Flash
(258,00 € HT)
copy of Pistons liners kit Ø 58.00 mm Renault 670.1 - 800.01-02 - 845 cm3 Dauphine - R4
Pistons liners kit Ø 58.00 mm Renault 670.1 - 800.01-02 - 845 cm3 Dauphine 4L- R4
(255,00 € HT)
Shock absorber x 2 - rear- Renault Goelette
Pair of telescopic rear shock absorbers (Record) for Renault Goélette. Lengths: measurements taken at the base of the cartridge on one side, and at the center of the eye on the other ( this is not the overall length): 340/560 mm
(253,50 € HT)
Alternateur 24V adaptable pour Renault TP3, SG2, R2087
(304,00 € HT)
VM 203 occasion
(302,00 € HT)
Pistons liners kit Ø 70.00 mm Renault 688.01 to 13 - 1108 cc
Pistons liners kit Ø 70.00 mm Renault engine type 688.01 to 688.13 - Cleon block 1108 cm3
(250,00 € HT)
Pistons linerss kit - 91 mm base - Renault Prairie Goelette 668
" Kit 4 liners / pistons for Renault type 668 engine (Colorale, Goélette, Frégate, etc) Standard engine, 11hp. Bore 85 base 91mm. Composed of 4 pistons with segments, pins and circlips, 4 liners. New period stock. NON-contractual PHOTO. "
(249,58 € HT)
Kit pivot AV 1er montage COMPLET Renault R206 E1
Kit pivot - Pièces neuves issue d'anciens stocks pouvant avoir des traces superficielles de d'oxydation mais parfaitement utilisables. Voir photo de détails pour les dimensions
(299,40 € HT)
Front pivot kit 3rd COMPLETE assembly for Renault R2061 R2062
Pivot kit delivered - New parts from old stocks that may have superficial traces of oxidation but perfectly usable. See details photo for dimensions
(249,17 € HT)
copy of Segment set Ø 66.80 mm Simca Chambord 2.38x2.38x5 - 8cyl
Segment set Ø 66.80 mm Simca 2.38x2.38x5 - 8cyl
(248,00 € HT)
Mechanism clutch PKSC - Simca Chambord Versailles
Clutch mechanism reconditioned, in standard exchange mounted on Aquilon Simca V8 engineComplete disassembly, micro balling, surfacing and retaring of the pressure plate.(The sending is done after receipt of the used mechanism, not ...
(248,00 € HT)
Pistons liners kit Ø 58.00 mm Renault 670.1 - 800.01-02 - 845 cm3 Dauphine - R4
Pistons liners kit Ø 58.00 mm Renault 670.1 - 800.01-02 - 845 cm3 Dauphine 4L- R4
(245,00 € HT)
Carter Distri occasion rénové AQUI
(241,67 € HT)
connecting rod bearing 0.25 - Ø 39.75 - Simca 9 - 1200 cm3
connecting rod bearing 0.25 - Ø 40.00 - Simca 9 - 1200 cm3(does not mount on Flash or Rush)
(240,00 € HT)
Bearings for Simca Versailles Chambord 020 - 52.79 mm
Set of bearings for Simca Versailles, Chambord, Ariane 8 etc. V8 "Aquilon" engine.(1 rear bearing + 2 front and central single bearings)Dimension: 020 US (0.50 mm)
(240,00 € HT)
Maître cylindre asymétrique 38.1 mm Citroen U23
Maître cylindre piston d 38.1 mm (1'1/2). Fixation 3 trous asymétriques. longeur 210 mm. Se monte sur Citroen U23 suivant version. Attention stock très réduit, nous consulter avant commande svp.
(240,00 € HT)
Prairie Goélette mechanism clutch
" Clutch mechanism reconditioned, in standard exchange. Fitted on Renault Colorale, Prairie, Goélette, Galion, R2087 and derivatives Complete disassembly, micro balling, surfacing and retaring of the pressure plate. (The sending is done after ...
(285,00 € HT)
Renault engine connecting rod bearingsFregate dimension 0.25 - 51.75 mm
Set of 8 connecting rod bearings dimension 0.25 crankpin d 51.75 mm - Fregate engine 668 - 11cv - 2L
(236,67 € HT)
Peugeot 203 403 clutch mechanism
Clutch mechanism reconditioned, in standard exchange. Fitted on Peugeot 203, 403, D4A, etc ...Complete disassembly, micro-blasting, surfacing and retaring of the pressure plate.(The shipment is made after receipt of the used mechanism, not ...
(235,00 € HT)
Bearings for Simca Versailles Chambord 030 - 52.53 mm
" Set of bearings for Simca Versailles, Chambord, Ariane 8 etc. V8 engine" "Aquilon" ". (1 rear landing + 2 front and central single landings) Dimension: 030 US (0.75 mm) "
(233,33 € HT)
Bearings for Simca Versailles Chambord 010 - 53.04 mm
" Set of bearings for Simca Versailles, Chambord, Ariane 8 etc. V8 engine" "Aquilon" ". (1 rear landing + 2 front and central single landings) Dimension: .010 US (0.25 mm) "
(233,33 € HT)
Bearings for Simca Versailles Chambord standard - 53.30 mm
Set of bearings for Simca Versailles, Chambord, Ariane 8 etc. V8 "Aquilon" engine. (1 rear bearing + 2 front and central single bearings) Dimension: STD
(233,00 € HT)
Shock absorber x 2 - rear - Panhard 24 BT
Pair of rear shock absorbers - Record brand - Panhard 24 BT
(232,50 € HT)
Shock absorber x 2 - front - Panhard 24 BT
Pair of front shocks - Record brand - Panhard 24 BT
(232,50 € HT)
Front shock absorber x 2 Citroen HY 70 and +
Pair of Record front shocks. Mounts on Citroen HY from 1970 and until the end.
(232,50 € HT)
Rear shock absorber x 2 Citroen HY 70 and +
Pair of Record rear shocks. Mounts on Citroen HY from 1970 and until the end.
(232,50 € HT)
Shock absorber x 2 - rear Renault Prairie Colorale
Set of 2 RECORD shocks - AR mounting - compressed / stretched 335/535 mm 14mm eye
(232,50 € HT)
Shock absorber x2 - front Renault Prairie Colorale
Set of 2 RECORD shocks - front mounting - compressed / stretched 305 / 480mm 14mm eye
(232,50 € HT)
Front shocks Simca Versailles Chambord Ariane
Front shock absorbers for Simca Trianon, Versailles, Régence, Marly 1 and 2, Beaulieu, Chambord and Présidence. New products of current manufacture of the Record brand, 100% conform to the original assembly. Supplied with protective bellows.Sold ...
(232,50 € HT)
Renault Fregate 1953-54 rear shock absorbers
Pair of rear shock absorbers for Renault Frégate from 1953 to 1954.Mounting threaded rod up - eyelet down.Extended = 495 mm (distance measured at the center of the eyelet and at the shoulder of the rod below the thread on the body side)Compressed ...
(232,50 € HT)
Pair of rear shocks Ford Vedette -
" Rear shock absorbers for Ford Vedette all models. Record brand, 100% conforms to the original assembly. Price per pair. "
(232,50 € HT)
Pair of Ford Vedette front shocks
Set of 2 front shock absorbers for Ford Vedette all models.Record brand, 100% conforms to the original assembly.Sold in pairs.
(232,50 € HT)
Clutch mechanism Simca 9 Aronde P60
Clutch mechanism reconditioned, in standard exchange.Complete disassembly, micro balling, surfacing and retaring of the pressure plate.(The sending is done after receipt of the used mechanism, not destroyed - Depending on the year, ...
(230,00 € HT)
Complete set of engine gaskets - Simca 8 - 1200
Complete set of engine gaskets - Simca 8 - 1200Attention non-contractual picture
(228,90 € HT)
Rear window seal Simca Chambord
Rear window seal Simca Chambord, Beaulieu, Présidence, Marly 2
(228,17 € HT)
Water pump - 1 outlet - Renault 4cv - Dauphine
Water pump - 1 outlet - Renault 4cv - Dauphine
(228,00 € HT)
Exhaust silencer Renault R2087 Colorale Prairie Goelette
" Exhaust silencer for Renault Colorale, Prairie, Goélette, R2087 and derivatives. Inlet diam: ext 55 - int 50 mm - Outlet diam: ext 50 - int 46 mm - Overall length 690 mm - length x width of the "" potato "" 540 x 200 mm - thickness 110 mm p ...
(227,50 € HT)
Pinion oil pump mounted on axis - Ford Vedette
Replacement gear for oil pump - V8 Ford Vedette.Delivered riveted with new axle. (Advantageously replaces the celoron one that has become fragile over time)Attention for the V8 Simca 13 hp 2350 cm3, choose the reference "Simca oil pump pinion" on ...
(270,20 € HT)
Pinion oil pump mounted on axis - Simca Versailles Chambord
Replacement pinion for oil pump - Delivered riveted with new axle - V8 Simca Versailles, Chambord, etc. - Advantageously replaces the celoron one that has become fragile over time.Attention for Ford Vedette V8 12cv 2150 cm3, choose the reference ...
(270,20 € HT)
Citroen U23 HY 11D engine kit cast iron cylinder head
Engine seal kit for Citroen U23, HY, equipped with 11D engine (cast iron cylinder head). The cylinder head gasket is slightly different from that of the 11D engine for Traction (reverse water pump). See detail of the cylinder head gasket on the ...
(225,00 € HT)
Clutch mechanism type 2 - fits to clutch disq springless - Citroen HY
Clutch mechanism reconditioned, in standard exchange mounted on HY engine (aluminum cylinder head).Complete disassembly, micro balling, surfacing and retaring of the pressure plate.(The sending is done after receipt of the used mechanism, not ...
(265,00 € HT)
connecting rod bearing 0.25 - Ø 43.75 - FLASH - RUSH 7CV - RUSH SUPER M - Simca Aronde Ariane and 1300 1301
Set of bearings for connecting rods dimension 0.25 - Ø 43.75Mounts on engine type 312 -316 -FLASH - RUSH 7CV - RUSH SUPER MFor vehicle:- Dovetail motor FLASH or RUSH 7hp,- Ariane with RUSH and RUSH Super M engines,- SIMCA 1300 and 1301(Not ...
(219,00 € HT)
Water pump for pulley with central nut + pin - Simca Aronde P60 Ariane
Water pump for pulley with central nut + pin - Simca Aronde P60 Ariane
(217,50 € HT)
Water pump for pulley with 4 fixing screws - Simca Aronde P60 Ariane
Water pump for pulley with 4 fixing screws - Simca Aronde P60 Ariane Flas or RushDelivered with the 2 gaskets
(217,50 € HT)
Jeu tapis avant - 4 parties - Peugeot 203 1er modèle
(215,00 € HT)
Optical assembly + rim + similar casing Marchal - Lighthouse
Set of 1 Marchal similar headlight including:1 x parabolic optic1 x chrome hoop1 x black lacquered casing
(215,00 € HT)
Segment set Ø 66.04 mm Simca Chambord 2.38x2.38x5x5 - 8cyl
Segment set Ø 66.04 mm Simca 2.38x2.38x5x5 - 8cyl
(214,00 € HT)
Clutch mechanism Ford Vedette
Clutch mechanism reconditioned, in standard exchange mounted on Ford Vedette, Abeille, Comète, Monte Carlo, Vendôme engine Complete disassembly, micro balling, surfacing and retaring of the pressure plate. (The sending is done after receipt ...
(255,00 € HT)
Front brake cylinder Ø 28.5 mm - set of 4 - Simca Chambord
Set of 4 front brake cylinders. -Simca Beaulieu, Chambord, Présidence as well as Ariane 4 and Ariane 8 - Simca 1300 until September 1965.Comprises: one cylinder with left bleed, one with right bleed and two cylinders without bleed.Diameter 28.57 ...
(210,25 € HT)
Front brake cylinder Ø 28.5 mm - set of 4 - Simca Ariane
Set of 4 front brake cylinders. - Simca Ariane 4 and Ariane 8 - Simca 1300 until September 1965Includes: one cylinder with left bleeder, one with right bleed and two cylinders without bleed.Liquid entry 3/8Diameter 28.57 mm
(210,25 € HT)
Exhaust - tube + stainless steel final stock (n ° 4) - Simca Chambord
" Outlet tube with bracket (passage of the bridge) to be connected to the outlet of the silencer. All stainless steel. "
(220,35 € HT)
Clutch mechanism Fregate
Clutch mechanism reconditioned, in standard exchange. Mounted on Renault Frégate, Domaine, Manoir and derivativesComplete disassembly, micro balling, surfacing and retaring of the pressure plate.(The shipment is made after receipt of the used ...
(248,00 € HT)
Mechanism clutch - PEUGEOT 404
" Clutch mechanism reconditioned, in standard exchange fitted on Peugeot 404 engine. Complete disassembly, micro balling, surfacing and retaring of the pressure plate. (The sending is done after receipt of the used mechanism, not destroyed) ...
(248,00 € HT)
Front shock absorbers 1951-60 renault Fregate
Pair of Record front shock absorbers for Renault Fregate from 1951 to 1960 all models (Amiral, Estate, Manor, Grand Pavois).Mounting eye up - eye down.
(206,50 € HT)
Renault Fregate 1955-60 rear shock absorbers
Pair of Record rear shock absorbers for Renault Fregate from 1955 to 1960 all models (Amiral, Domaine, Manoir, Grand Pavois).Mounting threaded rod up and down.
(206,50 € HT)
Citroen HY type H brake limiter distributor
Citroen HY type H brake limiter distributor
(206,00 € HT)
Engine gaskets kit - Simca 9 - 1221 cm3 engine
Gasket set with cylinder head gasket for Aronde Simca 9 - 1221 cm3 engineIncludes engine gaskets including cylinder head gasket, and oil seal ring for crankshaftNon contractual photo. Not suitable for Flash or Rush engines.
(204,75 € HT)
Front brake cylinder - Kit of 4 pieces 28.5mm - Peugeot 403 ALL models
4 front brake cylinders kit - Ø 28.57 mm - 7/16 inlets - Peugeot 403 ALL modelsThe kit includes:- 2 upper FRONT cylinders- 2 lower FRONT cylindersFrench manufacturing - NON-CONTRACTUAL photo.
(202,00 € HT)
Turbine water pump 70 mm - pulley 112mm - Renault Tp3 SG2
Complete water pump for engine type 817 - 2.6L. The pump is delivered with its seal as in the photo.
(240,00 € HT)
Turbine water pump 60 mm - pulley 112mm - Renault Fregate, Prairie, Goelette, R2087, ...
Water pump complete with Ø 112 pulley for 17mm belt - is mounted on tumbled engine 668 or 671 Renault Frégate, Prairie, Colorale, R2087, Goélette, Galion, SG2 12cv, and derivatives. Ø 60 mm (cannot be mounted on type 817 - 2.6L engine). The pump ...
(240,00 € HT)
Complete water pump - Impeller 80 mm - Citroen Traction
Complete water pump ready to install - Impeller Ø 80mm - Beautiful workmanship - Citroen Traction
(199,90 € HT)
Additional kit for flashing on 190SL - Easy Drive
Accessories for flashing information transmission via wipers on brass bushings.
(199,50 € HT)
Segments set Ø 56.00 2.5x2x2.5x4 - Rosengart LR (set of 16)
Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 56.00Contact us for other dimensions.
(199,17 € HT)
Segment set Ø 56.50 2x2x2x4 - Rosengart LR (set of 16)
Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 56.50- 3 x high compression 2mm- 1 x high scraper 4 mmContact us for other dimensions.
(199,17 € HT)
Segment set Ø 58.00 2x2x2x3.5 - Rosengart LR (set of 16)
Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 57.50. Be careful in the event of an error on your part, these products cannot be taken back.- 3 x compression h 2mm- 1 x scraper h 3.5 mmContact us for other ...
(199,17 € HT)
Segment set Ø 57.00 2x2x2x3 - Rosengart LR (set of 16)
Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 57.50.Please note: in the event of an error on your part, these products cannot be taken back.- 3 x compression h 2mm- 1 x scraper h 3 mmContact us for other ...
(199,17 € HT)
Segment set Ø 57.50 2x2x3.5x3.5 - Rosengart LR (set of 16)
" Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 and derivatives. Bore 57.50 - 2 x compression h 2mm - 2 x scraper h 3.5 mm Contact us for other dimensions. "
(199,17 € HT)
Exhaust - tube + final stainless steel handle (n ° 4) - Simca Versailles
Outlet tube with bracket (passage of the bridge) to be connected to the outlet of the silencer.All stainless steel.
(208,65 € HT)
connecting rod bearing STD - Ø 40.00 - Simca 9 - 1200 cm3
connecting rod bearing STD - Ø 40.00 - Simca 9 - 1200 cm3(does not mount on Flash or Rush)
(195,83 € HT)
connecting rod bearing STD - Ø 40mm - Simca 9 - Aronde 1951-56
connecting rod bearing STD - Ø 40mm - Simca 9 - Aronde 1951-56
(195,83 € HT)
STD connecting rod bearings - Ø 40mm - Simca 8 - 1200 cm3
connecting rod bearing STD - Ø 40mm - Simca 8 - 1200 cm3
(195,83 € HT)
conrod bearing STD - Ø 44 - FLASH - RUSH 7CV - RUSH SUPER M - Simca Aronde Ariane and 1300 1301
Set of bearings for connecting rods STD dimension - Ø 44Mounts on engine type 312 -316 -FLASH - RUSH 7CV - RUSH SUPER MFor vehicle:- Dovetail motor FLASH or RUSH 7hp,- Ariane with RUSH and RUSH Super M engines,- SIMCA 1300 and 1301(Not suitable ...
(195,00 € HT)
Repair kit for 2 front shocks - 38 mm - Peugeot 203 or 403 - before 1954
Repair kit for Peugeot 203 and 403 front shock absorbers. The kit allows you to renovate 2 FRONT shock absorbers, including:- 4 sealed bearings- 4 sealing rings- 2 silent blocks of arm length 38 mm (there is a version in 44 mm)- 1 oil can for ...
(194,00 € HT)
Repair kit 2 rear shock absorbers Peugeot 203 or 403
Repair kit for Peugeot 203 and 403 rear shock absorbers.Includes:- 4 sealed bearings- 4 sealing rings- 2 silent arm blocks- 1 oil can for shock absorber.The kit allows to renovate 2 REAR shock absorbers.
(194,00 € HT)
Repair kit 2 front shocks - 44mm - Peugeot 203 or 403
" Repair kit for Peugeot 203 and 403 front shock absorbers. The kit allows you to renovate 2 FRONT shock absorbers, including: - 4 sealed bearings - 4 sealing rings - 2 silent blocks of arm length 44 mm (there is a version in 38 mm) - 1 can of ...
(194,00 € HT)
Clutch mechanism Simca Ariane 4
Clutch mechanism reconditioned, in standard exchange.Complete disassembly, micro balling, surfacing and retaring of the pressure plate.(The sending is done after receipt of the used mechanism, not destroyed - Depending on the year, ...
(230,00 € HT)
Mechanism clutch Peugeot D3 D4
Clutch mechanism reconditioned, in standard exchange. Mounted on Peugeot D3 D4, etc ...Complete disassembly, micro balling, surfacing and retaring of the pressure plate.(The sending is done after receipt of the used mechanism, not destroyed - ...
(230,00 € HT)
connecting rod bearing STD - Ø 40 - Simca Aronde RUSH 6cv - 1090 cm3
connecting rod bearing STD - Ø 40 - Simca Aronde RUSH 6cv - 1090 cm3
(190,00 € HT)
Set of 4 relined rear brake shoes Citroen U23
Set of 4 relined brake shoes (Ar) in standard exchange for Citroen U23. Microblasting, varnish, industrial bonding of friction. Strong adhesion.Eliminates the problem of rivets that could damage the drums. Shipping upon receipt of worn parts.Non ...
(188,33 € HT)
Carburetor similar to the Solex 32 PBIC type for Renault engine 603
New carburettor similar to the Solex 32 PBIC type. Vacuum outlet on foot base. Equipped for Renault engine 603 and derivatives
(185,00 € HT)
Carburetor similar to the Solex 32 PBIC type for Renault Fregate
New carburettor similar to the Solex 32 PBIC type. Vacuum outlet on foot base. Equipped for Renault Frégate and derivatives
(185,00 € HT)
Segment set Ø 66.80 mm Simca Chambord 2.38x2.38x5 - 8cyl
Segment set Ø 66.80 mm Simca 2.38x2.38x5 - 8cyl
(182,00 € HT)
Alternator for switching to 12V - 50 A
(180,00 € HT)
Set of 4 relined rear brake shoes - Renault SG2
Set of 4 rear brake shoes relined in standard exchange for Renault SG2. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets that could damage the drums. Shipping upon receipt of worn parts.
(180,00 € HT)
Set of 4 FRONT brake shoes relined Renault SG2
Set of 4 front brake shoes relined in standard exchange for Renault SG2. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets that could damage the drums. Shipping upon receipt of worn parts.
(180,00 € HT)
Set of 4 relined rear brake shoes for Renault Galion
Set of 4 relined brake shoes (Ar) in standard exchange for Renault Galion. Microblasting, varnish, industrial bonding of friction. Strong adhesion.Eliminates the problem of rivets that could damage the drums. Shipping upon receipt of worn ...
(180,00 € HT)
Windscreen seal Simca Chambord
Windscreen seal Simca Chambord, Beaulieu, Présidence, Marly 2
(180,00 € HT)
Steering gear on chassis - Simca Versailles - Chambord - Ariane
Steering gear on chassis - Simca Versailles - Chambord - Ariane
(214,00 € HT)
Valves x 4 - ADM ECH Ø 35x9.5x138 - 60 degrees - Citroen C4G C6G
Set of 4 ADM ECH valves Ø 35x9.5x138 - 60 degrees - Citroen C4G C6G
(178,00 € HT)
Head gasket + 4 x manifold gaskets - Renaul NN
Includes:- 1x copper cylinder head gasket- 1 x 3-hole gasket for the manifold- 2 x small oval gaskets- 1 x large oval seal
(176,25 € HT)
Tie rod with steering ball joints - Simca Versailles Chambord
Tie rod with steering ball joints - Simca Versailles, Chambord and derivatives. Does not fit on Ariane:- 2 x ball joints + mounted bar.Please note this product is in standard exchange.
(210,00 € HT)
side window seal - 12 ml
(175,00 € HT)
Set of 2 heads for Simca Versailles Chambord Ariane
Set of 2 steering ball joints to equip one side of the front train - Simca Versailles, Chambord, Ariane and derivatives. Includes:- 1 x long ball joint,- 1 x short ball joint,(the adjusting sleeve is not delivered - allows one side of the front ...