Front brake cylinder 31.75 mm - SAMBRON
Front brake cylinder - Ø 31.75 mm - Sambron
(69,50 € HT)
Adapter connection 7/16 male - 3/8 female
Adaptateur freinage mâle 7/16 (envion 11mm) femelle 3/8
(17,50 € HT)
Master cylinder kit 38.1 mm - Renault Galion
Repair kit for 38.1 mm master cylinder.
(74,75 € HT)
Brake cylinder 28.5mm - entry 11mm (7/16th) - Peugeot Q3A
Brake cylinder 28.5mm - entry 11mm (7/16th) -
(65,00 € HT)
Remise en état lot de pièces spécifiques
(90,00 € HT)
segment set 85 mm 2x2x2x4x4 Renault Fregate
Set of 20 segments for 4 eyebolts dimension 85 mm - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 2 mm2 x scraper in 4 mmPossibility of ordering in 85 mm (call us)
(138,00 € HT)
copy of Oil pressure contact mano - Ford Vedette 1949 - 54
oil pressure switch for Ford Vedette engine from 1949 to 1954 - Thread M 10x100
(10,50 € HT)
Best Sellers
Ignition capacitor 6, 12 and 24V
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Rear brake cylinder 28.57 mm - 1 1/8 Renault Colorale, Prairie, R2087, Goelette
" Rear wheel cylinder. Diam: 1" "1/8 or 28.6 mm. Liquid inlet diameter = 11.4 mm (1/2 20 f / p) Renault Colorale, Prairie, R2087, Goélette, 1000 kg, 1400 Kg and derivatives . "
(75,35 € HT)
Front brake cylinder kit 34.9 mm - 1 3/8 Renault Prairie R2087 Goelette
Repair kit for AV cylinder. d 34.93 mm
(16,00 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,35 € HT)
Ignition - 4 x Spark plugs for Renault Fregate
Set of 4 NGK spark plugs with std base (14 mm), Renault Fregate, Colorale, Prairie engine (side engine 603 and tumbled 668 or 671), R2087, Goélette, Galion, SG2 gasoline (engine 671 or 817) etc. Compatible with SP95 and SP98 fuels
(20,00 € HT)
Best sellers There are 1559 products.
Citroen U23 HY 11D engine kit cast iron cylinder head
Engine seal kit for Citroen U23, HY, equipped with 11D engine (cast iron cylinder head). The cylinder head gasket is slightly different from that of the 11D engine for Traction (reverse water pump). See detail of the cylinder head gasket on the ...
(225,00 € HT)
Citroën Traction rear shock absorbers
Set of 2 RECORD shocks - Rear mounting Citroen Traction
(158,50 € HT)
Citroen Traction rear brake cylinder - 7 - 11 - 15 HP
Rear wheel cylinder - Traction 7.11 and 15 hp. diam 25.4 mm
(45,25 € HT)
Citroën traction mechanism clutch
Clutch mechanism reconditioned, in standard exchange mounted on Citroën Traction engine, Type H, HY, U23 and derivatives. Complete disassembly, micro balling, surfacing and retaring of the pressure plate. p > (The sending is done after ...
(330,00 € HT)
Citroën Traction gearbox outlet repair sleeve
Repair sleeve (speedi sleeve) for gearbox outlet. To slide on the worn part to repair the worn part (marked) by the spinnaker. Fit new spinnakerFor one side.
(28,00 € HT)
Citroen traction disc clutch
Clutch disc reconditioned, in standard exchange Traction, type H, HY, U23 and derivatives. Complete disassembly, micro balling and painting. (The sending is done after receipt of the used mechanism, not destroyed)(Depending on the year, ...
(110,00 € HT)
Citroën Traction 11D engine cover
Engine seal kit for Citroen Traction 11D engine(fitted with cast iron cylinder head and sheet metal cylinder head cover).
(115,00 € HT)
Citroen HY U23 Traction timing chain
Distribution chain. Non contractual photo.
(28,33 € HT)
Citroen HY type H brake limiter distributor
Citroen HY type H brake limiter distributor
(206,00 € HT)
Citroën HY rear hub oil seal - external
Sealing ring (spinnaker) for rear hub Citroen HY, type H, HW. Sold individually External (the smaller one)
(13,65 € HT)
Citroën HY rear hub oil seal
Sealing ring (spinnaker) for rear hub Citroen HY, type H, HW. Sold individually
(13,65 € HT)
Citroen HY rear brake cylinder 19mm
Rear brake cylinder for Citroen HY or type H piston diameter = 19 mm.All the brake parts we sell are made in France.
(79,00 € HT)
Citroen HY lower hose WITHOUT heating after 07/63
Lower hose without heating flow after 07/1963
(32,00 € HT)
Citroen HY graphite thrust clutch - 1963 and late
Graphite stopper for Citroen HY from 1963 petrol engine type ID 19
(130,00 € HT)
Citroën HY front hub oil seal - internal
Sealing ring (spinnaker) for Citroen HY front hub, type H, HW. Sold individually Internal seal (the bigger one)
(13,65 € HT)
Citroen HY engine kit - H72 - H78
Seal kit for Citroen H, HY, HW equipped with H72 type engine 72 or 78 mm bore. from 1963 to 82 - Detail of the cylinder head gasket by clicking on the 2nd photo. (cylinder head and cylinder head cover in aluminum - engine similar to that of ID ...
(153,00 € HT)
Citroen HY 22mm rear brake cylinder
Rear brake cylinder for Citroen HY or type H piston diameter = 22 mm. (until 1966)All the brake parts we sell are made in France.
(63,95 € HT)
Citroen H and HY tandem master cylinder
Tandem master cylinder (dual circuit) 25.4 mm fitting citroen HY from 1975
(358,00 € HT)
Charger and maintenance 6v / 12v Accumate
AccuMate is designed to automatically charge and monitor batteries without the danger of overcharging them, regardless of plug-in time. AccuMate is available for all 6V and 12V lead acid batteries, making it a perfect accessory for owners of ...
(60,00 € HT)
CHAMBORD exhaust - oval stainless steel silencer (n ° 3) - Simca Chambord
Stainless steel silencer exhaust for V8 Simca Aquilon
(437,77 € HT)
CHAMBORD exhaust - n2 - stainless steel primary tube - Simca Chambord
Primary tube between the "Y" and the silencer - Part 2 on the photoAll stainless steel.
(91,65 € HT)
cFront left brake cylinder - d 31.75 mm - inclined - Panhard Z1
Front left brake cylinder - d 31.75 mm - inclined - Panhard Z1
(105,00 € HT)
Central transmission bearing: bearing + sealed rings (spinnaker)
Kit for repairing the central transmission bearing (between the 2 transmission shafts).includes:1 sealed bearing 35 x 522 waterproof rings(the silent-block is not supplied)
(32,00 € HT)
Central intake gasket Ford Vedette Simca
Central gasket intake housing for Vedette Ford and Simca.
(50,00 € HT)
Central intake gasket - Ford Vedette
Central gasket intake housing for Vedette Ford. Special model for small Ford V8. Attention does not suit the V8 Simca Versailles -Chambord
(50,00 € HT)
Cast iron cylinder head exhaust gasket
Exhaust manifold gasket for cast iron cylinder head -Hy and Traction 11cv until 19632 seals are required per vehicle
(15,83 € HT)
Cartridge for oil filter renault fregate prairie etc.
Cartridge for Renault Frégate, Prairie, Colorale, Goélette, Transfluide oil filter.(for engines fitted with a filter holder). Central Ø = 8mm approx - Height = 123 mm - Ø 65 mm
(9,95 € HT)
Cartridge air filter - Citroen HY before 1963
Cartridge air filter - Citroen HY before 1963Dimensions on the photo
(21,58 € HT)
Cartouche filtrante filtre à air - Peugeot 404 injection
(35,00 € HT)
Carter Distri occasion rénové AQUI
(241,67 € HT)
carburettor jet 32 or pbic caliber 50
(10,00 € HT)
Carburetor similar to the Solex 32 PBIC type for Renault Fregate
New carburettor similar to the Solex 32 PBIC type. Vacuum outlet on foot base. Equipped for Renault Frégate and derivatives
(185,00 € HT)
Carburetor similar to the Solex 32 PBIC type for Renault engine 603
New carburettor similar to the Solex 32 PBIC type. Vacuum outlet on foot base. Equipped for Renault engine 603 and derivatives
(185,00 € HT)
Carburetor similar to the Solex 32 PBIC type
New carburettor similar to the Solex 32 PBIC model with accelerator pump. Vacuum outlet on foot base. Depending on the vehicle model, you will need to reset the configuration with the old starter, jets, cap or cover and throttle control
(163,07 € HT)
Carburetor similar to the Solex 32 PBIC Traction Citroen type
New carburettor similar to the Solex 32 PBIC type. Vacuum outlet on foot base. Configuration for Citroen TractionNozzle 26 - Main jet 135 and automatic nozzle 190 - Emulsion19 - Idle 50 - idle air 130 - Needle 1.5 - Float 12.5 gr - Accelerator ...
(163,07 € HT)
Carburetor gasket Stromberg Ford Vedette
Gasket for 22.2 Stromberg carburettor
(16,50 € HT)
Carburetor 32 PBICA - Peugeot 403 and 404
Carburateur neuf type Solex 32 PBICA. Se monte sur Peugeot 403 404. Selon modèle ajuster gicleurs, buse et réglages
(160,00 € HT)
Carburateur similaire au type Solex 34 PBIC Traction Citroen et ID 19
Carburateur neuf type Solex 34 PBIC. Prise de dépression sur embase de pied. Configuration pour Citroen Traction - ID 19 Buse 27 - Gicleur principal 140 et ajutage automaticité 165 - Emulsion19 - Ralenti 50 - air ralenti 130 - Pointeau 1.5 - ...
(165,00 € HT)
Cap for heating outlet ø 16 mm
Rubber plug for heating outlet on water pump or radiator. Delivered in ø 16mm by default (also available in 14 or 18 mm, just specify when ordering)
(4,00 € HT)
Cap for heating flow diameter 8 mm
Rubber stopper for starting on water pump - 8 mm
(2,08 € HT)
Canalisation Ø 8 mm bocal vers maitre cylindre - 1 m
Canalisation de frein refabriquée à la demande, uniquement en cuivre diamètre 8 mm
(42,00 € HT)
Calibrouge (Plastigage) mechanical clearance measurement
"Plastigage"The Calibrouge ("plastigage or plastigauge") is a simple and practical tool for measuring the clearances of your bearings. Range of use: operating clearance from 0.025 to 0.175 mm
(22,50 € HT)
Cable passage vitesses pour SImca Aronde P60 à partir de 06/1960
(90,00 € HT)
Cable kit with 12V starter relay - Citroen HY
(105,00 € HT)
Câble frein AR - long 176 (jeu de 2) Peugeot 203
Jeu de 2 câble frein AR - Long 176 cm - Attention gaine longue (128 cm) véhicule type camionnette, plateau, ambulance U8, C8
(76,00 € HT)
bush side axle fits to rear axle half shaft 35 mm - Peugeot 203
Sealing ring for 1/2 wheel shaft. Replaces the bakelite rings located in the rear axle trumpets on Peugeot 203.Used to stop the oil from the axle towards the rear hubs. (2 per car) Sold individually
(13,65 € HT)
bush side axle fits to rear axle half shaft 32mm - Peugeot 203
Sealing ring for 1/2 wheel shaft. Replaces the bakelite rings located in the rear axle trumpets on Peugeot 203.Used to stop the oil from the axle towards the rear hubs. (2 per car) Sold individually
(13,65 € HT)
BSX 155 brush set
A set of 4 brushes or carbon brushesDimensions: - 10mm x 25mm x 15mmVoltage: - 12Vreplaces Bosch 2 007 014 071
(10,00 € HT)
Brushes or carbon for Peugeot 203 403 disengageable water pump
Contact with brushes (carbon) for Peugeot 203 403 disengageable water pump. Delivered with the wire.
(31,00 € HT)
Brush set UX 87-88
Set of 2 brushes or carbon brushes for DUCELLIER dynamosRef Ducellier: 581111Assembly on Dynamos Ducellier n °:7562F: Citroën GS - Ami Super7584D: Citroën CX 2000 - 2200 - 2400 - Gti515012A: Citroën CX515008B and 519005B: Savien New original ...
(10,00 € HT)
Brush set UX 79-80
Set of new carbon brushes.alternator 608272 Citroën Peugeot RenaultNew original items, period parts.
(10,00 € HT)
Bronze ring - bush 15x19x30 for Citroen Traction HY U23 water pump
Bronze ring - bush 15x19x30 for Citroen Traction HY U23 water pump
(8,25 € HT)
Breather for cylinder head cover - Citroen HY
Breather for cylinder head cover - Citroen HYPetrol engine from 1963
(21,00 € HT)
brass banjo + hollow screw Vedette 1949
(38,00 € HT)
bras x 2 inox fil axe 5 mm
Bras d'essuie glace inox. tige filaire - Serrage sur axe 5 mm. Se monte avec balais type raclette ou lame - Vendu par 2
(48,00 € HT)
Brake switch - STOP - spring-loaded
Mechanical brake switch. STOP light function. To be fixed on bodywork or chassis.
(24,92 € HT)
Brake switch - stop - special silicone
Brake switch. STOP light function. 100% silicone liquid and LHM compatible1/2 - 20 thread / inch thread
(15,83 € HT)
Brake switch - STOP - silicone fluid - 7 / 16-20 th / inch
Brake switch for silicone fluid. STOP light function - Simca Aronde (depending on year) and P60Thread 7/16 - 20 thread / inch
(22,50 € HT)
Brake switch - STOP - Ford Anglia
Ford Anglia 105E and 106E brake switch. STOP light function
(24,83 € HT)
Brake switch - stop - DOT 3 and 4
" Brake switch. STOP light function - compatible with synthetic liquid type" "lockheed" "Dot 3 and 4. If using 100% silicone liquid: Choose this other reference 1/2 - 20 thread / inch thread "
(15,83 € HT)
Brake switch - STOP - 7 / 16-20f / p
Brake switch. STOP light function - Simca Beaulieu, Chambord, Présidence, Ariane 4 and Ariane 8.Generally mounted after April 1960.Thread 7/16 - 20 thread / inch
(22,50 € HT)
Brake switch - STOP - 10x100 conical - Silicone
Brake switch. STOP light function - 10x100 - for Silicone
(23,00 € HT)
Brake switch - STOP - 10x100 conical - DOT
Brake switch. STOP light function - 10x100 - for DOT liquid
(23,00 € HT)
Brake reservoir with rubber
Translucent tank, delivered with bracket; rubber plug and fitting.
(31,75 € HT)
Brake reservoir with nipple + contact
Brake fluid reservoir, translucent plastic.With plug, fixing bracket and electrical contact for minimum liquid level
(39,85 € HT)
Brake reservoir - male thread + electrical contact
Brake fluid reservoir, translucent plastic. With cap, mounting bracket and electrical contact for low fluid level
(39,50 € HT)
Brake master cylinder Ø 31.75 mm - Peugeot D3
Master cylinder complete with bellows: D 1'1 / 4 or 31.75 mm - inlet 3/4 - 16 f outlet 1/2 - 20fEntry in 18 mm. If the old model was 22mm, order the adapter here.Peugeot D3
(119,00 € HT)
Brake master cylinder Ø 31.75 mm - Peugeot 404 Thermostable
Brake master cylinder Ø 31.75 mm - Peugeot 404 Thermostable
(98,00 € HT)
Brake master cylinder Ø 31.75 mm - Peugeot 202 UH
Master cylinder complete with bellows: D 1'1 / 4 or 31.75 mm - inlet 3/4 - 16 f outlet 1/2 - 20fEntry in 18 mm. If the old model was 22mm, order the adapter here.Peugeot 202 UH
(119,00 € HT)
Brake master cylinder 31.7 mm - Renault Colorale Prairie R2087 Goelette
" Complete master cylinder with bellows: D 1'1 / 4 or 31.75 mm - inlet 3/4 - 16 f outlet 1/2 - 20f Entry in 18 mm. If the old model was 22 mm, order the adapter here . p> For Renault Prairie, Colorale, R2087, Goélette, R2065, R2066, Galion ...
(119,00 € HT)
Brake master cylinder - Ø 28.5 mm Peugeot D4 - 11/57 to end
Brake master cylinder Ø 28.5mm, Peugeot D4 D4A D4B - 11/57 to end. Non contractual photo.
(93,00 € HT)
Brake line - from 51 to 99 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Large model, length from 50 cm, max 2m. Provide model (length and 2 original tips)Shipping after receiving your model.
(42,00 € HT)
Brake line - from 200 to 250 cm
Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.
(128,00 € HT)
Brake line - from 150 to 200 cm
Brake line re-manufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original end pieces)Shipping after receiving your model.
(88,00 € HT)
Brake line - from 100 to 150 cm
" Brake line remanufactured on request, only in copper diameter 6.35 mm. . Provide model (length and 2 original end caps) Shipment after receipt of your model. "
(66,00 € HT)
Brake line - from 0 to 50 cm
Brake line remanufactured on demand only in copper diameter 6.35 mm. Small model, length less than 50 cm. Provide model (length and 2 original tips) Shipping after receipt of your model.
(29,50 € HT)
Brake limiter distributor - set of springs - Citroen HY type H
Spring set for brake distributor brake limiter Citroen HY type H
(24,92 € HT)
brake hose P5P5 380 mm - hydrovac 404
(29,50 € HT)
Brake hose front or rear 350 mm Peugeot 203
Rear brake hose length 356 mm. Peugeot 203 all models, front and rear. (3 hoses per vehicle) Sold individually
(25,00 € HT)
brake hose B3P5 300 mm
(29,50 € HT)
Brake hose 493 mm rear Peugeot 403
Rear brake hose for Peugeot 403 all models - Length 493 mm
(26,00 € HT)
Brake hose 493 mm AR - Simca 9 and Aronde - 01/53 to 02/56
Rear brake hose 493 mm - Simca 9 - 1200 cm3 and Aronde - 01/153 to 02/1956
(26,00 € HT)
Brake hose 445 mm front Dyna Z
Front brake hose Dyna Z Panhard - May 1958 at the end - length 445 mm
(25,00 € HT)
Brake hose 430 mm SUMB Marmon
Brake hose Length 430 mm. Entry 7/16 e 16 f / p for SUMB Marmon. Please check the correspondence with your model before ordering.For other models, please call us
(36,00 € HT)
Brake hose 412 mm rear G Panhard PL 17
Rear brake hose G Panhard PL 17 - from April 1962 to the end (Record fitting) - length 412 mm
(26,00 € HT)
Brake hose 412 mm front Peugeot 403
Front brake hose for Peugeot 403 all models - Length 412 mm
(26,00 € HT)
Brake hose 412 mm front Dyna Z
Front brake hose Dyna Z Panhard - 1954 to June 1958 - length 412 mm
(26,00 € HT)
Brake hose 380 mm SUMB Marmon
Brake hose Length 380 mm. Entry 7/16 e 16 f / p for SUMB Marmon. Please check the correspondence with your model before ordering.Outside diam: 15.6 mmInternal diam: 10mmFor other models, please call us
(35,00 € HT)
Brake hose 378 mm before Simca 9 Jan 53 at the end
Front brake hose. Simca 9 1200 assembly from January 53 to end. Length 378 mm
(26,00 € HT)
Brake hose 367 mm - front or rear - Simca Aronde P60
Front or rear brake hose 367 mm long.Male ext 9mm - female int Ø 8.3 mmMounts on Simca Aronde or P60 from Nov 1957 to Dec 1963.Check with your model before ordering.
(21,00 € HT)
Brake hose 367 mm - front or rear - Simca 1300
Front or rear brake hose length 367 mm.Male ext 9mm - female int Ø 8.3 mmMounts on:- Simca 1300 front or rear- Simca 1500 rear onlyCheck with your model before ordering.
(21,00 € HT)
Brake hose - FF - 493 mm rear Peugeot 403
Front brake hose length 490 mm - Two female-female endsOutside diam: 15.6 mmInternal diam: 10mm
(25,00 € HT)
Brake cylinder 28.5mm - entry 11mm (7/16th) - SAMBRON dump truck
Brake cylinder 28.5mm - entry 11mm (7/16th) - SAMBRON dump truck
(65,00 € HT)
Brake cylinder 1 3/8 U - 34.9 mm - Renault Galion
Front wheel cylinder. Diam 1 "3/8 or 34.9 mm. Fixing by 2 screws type US 5/16 - 24f / p Ø liquid inlet = 1/2 pTo recognize the model it is enough to measure the connection which is screwed in the entry of the cylinder = 12.5 mm.For Renault ...
(78,50 € HT)
Brake cylinder 1 3/8 F - 34.9 mm - Renault Galion
For Renault Galion, 1400 kg and other heavy goods vehicle derivatives. Wheel cylinder. Diam 1 "3/8 or 34.9 mm.Front wheel cylinder. Diam 1 "3/8 or 34.9 mm. Fixing by 2 screws type M8 - Ø liquid inlet = 7/16 pTo recognize the model, it suffices to ...
(78,72 € HT)
Brake clip spring kit - front wheels - Peugeot 403
Brake spring kit for front wheel - Peugeot 403
(22,00 € HT)
Boot handle sole kit - Ford Vedette 1954 - Berline / Coupé / Cabriolet
Sole kit for trunk handle Ford Vedette 1954 - Berline / Coupé / Cabriolet - Neat French manufacturing - Techni-Tacot exclusivityUnderstand :1 x rear trunk handle sole
(26,58 € HT)
Boot handle sole kit - Ford Vedette 1949 -53 - sedan / coupe / cabriolet
Sole for Ford Vedette sedan, coupe, convertible. French manufacture by Techni-Tacot.Including:1 x sole for the trunk handle.
(26,68 € HT)