valves x 4 - Ø32x8x105 - intake - Simca 8 - 1200

valves x 4 - Ø32x8x105 - intake - Simca 8 - 1200

Set of Gaskets engine Aquilon - Simca Versailles Chambord

Seal kit produced according to Techni-Tacot requirements. Fit to Simca Versailles, Régence, Trianon, Beaulieu, Chambord, Présidence, Ariane 8 and Marly V8 engines. Contains all the gaskets (2 cylinder head gaskets 1.6 mm thick, water pump, ...

Set of 4 relined front brake shoes Simca Chambord

" Set of 4 relined brake shoes (Av) for Simca V8 in standard exchange. Microblasting, varnish, industrial friction bonding. Strong adhesion. Eliminates the problem of rivets which can damage the drums. Shipping upon receipt of worn parts. "

€186.00 TTC
(155,00 € HT)

Valves x 6 - ADM 30° Ø 37x9x138 - Citroen P34 P36 10cv

Set of 6 ADM valves 30 ° - Ø 37x9x138 - Citroen P34 P36 10cv

Rear brake cylinder 44.4 mm - Renault Galion1p 3/4 -

For Renault Galion 2t5 and other derivatives in heavy vehicle version.Wheel cylinder inner diameter 44.5 mm or 1 3/4 inch.Liquid inlet 1/2 20F / P  

€184.20 TTC
(153,50 € HT)

Citroen HY engine kit - H72 - H78

Seal kit for Citroen H, HY, HW equipped with H72 type engine 72 or 78 mm bore. from 1963 to 82 - Detail of the cylinder head gasket by clicking on the 2nd photo. (cylinder head and cylinder head cover in aluminum - engine similar to that of ID ...

Bearing (4x4 version) front outer hub - Renault Prairie R2087 Goelette

Front hub bearing (external) for Renault 4x4 Colorale, R2087, Goélette etc.1 per side of the wheel (i.e. 2 per vehicle)Be sure to check the dimensions BEFORE orderingOverall dimensions: 42.86 x 82.55 x 19.84 / 15.08

Set Segments Ø 58.00 2x2x3 - Rosengart LR (set of 12)

Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 58. Attention in case of error on your part, these products cannot be taken back.- 8 x compression h 2mm- 4 x scraper h 3 mmContact us for other sizes.

joint de culasse rosalie 8cv

Pignon distribution céloron 52d - moyeu 38mm - neuf stock d'époque - Renault moteur 603

Pignon distribution céloron 52 dents - alésage 38 mm - neuf stock d'époque - Renault moteur 603 14cv ("85 latéral"). Ne convient pas aux moteurs culbuté 668, 671 et 817

Set of 4 front brake shoes 55 mm - HY or type H Citroen - 02/1962 to 1981

Set of 4 front brake shoes 55 mm - HY or type H Citroen - 02/1962 to 1981 - standard exchange. (Send us your set before shipping the new one). High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled ...

€180.00 TTC
(150,00 € HT)

Segment set Ø 75 mm Peugeot 203 403 - 7cv - 2.5x2.5x2.5x4.5x4.5

Segment set Ø 75 mm Peugeot 203 403 - 7cv4 x sets each comprising 3 2.5 mm compression rings + 2 4.5 mm oil scraper rings.Non contractual photo

Renault Fregate 1101, 1100 2nd assembly silent block kit

Joint kit on lower rocket. Parts from old stocks that may show superficial traces of oxidation but perfectly usable. See details photo for dimensions

Silent block upper spindle kit Renault Fregate 1101, 1100 2nd assembly

Kit articulation on upper rocket. Parts from old stocks that may show superficial traces of oxidation but perfectly usable. See details photo for dimensions

Connecting rod bearings set - Peugeot 203 - 403 dimension 0.30

Set of bearings for 4 Peugeot 203 and 403 connecting rods.Repair dimension 0.30. French made.

Rosengart LR6 cylinder head gasket

Cylinder head gasket for LR6 engine and other 6 cylinders Rosengart.

€180.00 TTC
(150,00 € HT)

Set of segments Ø 69.50 mm - 3x2.5x2.5x4

Segment set Ø 69 mm to equip 4 pistons with 4 grooves:- 3x2.5x2.5x4Non contractual photo

Set of 20 segments Ø 68 mm - 2.5x2.5x2.5x5x5

Segment set Ø 68 mm to equip 4 pistons with 5 grooves:sets each comprising 3 compression segments 2.5 mm + 2 oil scraper segments 5 mm.Non contractual photo

Rear window seal Simca Versailles - Ariane

Rear window seal - Simca Trianon Versailles Régence Ariane Marly 1

6 CYL ENGINE KIT - CITROEN TRACTION 15 CV

Complete engine gasket set, including cylinder head gasket for Citroën Traction 15.

Bearing clutch: replacement bearing - Ford Anglia

Bearing for thrust ball - clutch Ford Anglia. Non contractual photo.

Engine gaskets set with cylinder head gasket - Renault 668/671

Engine gaskets kit (top and bottom) Renault type 668 and 671 (11 and 12hp) (Colorale, Goélette, R2087, Frégate, etc). Includes gaskets for:- cylinder head, rocker cover, 8x valve stem, 2 on central oil tee, tappet housing, 2 x ADM / ECH,- water ...

Joint de culasse pour Citroën B14 G (375/172)

Joint de culasse pour Citroën B14 G (375/172)

Bearings 54.00mm - STD dimension - without cheek - Citroen HY

Bearing bearings dimension 50.00 (STD) -For ID 19 engine and similar engine block

Valves x 4 - ADM ECH Ø 32x8.5x129.7 - Citroen B2 B12 B14

Set of 4 ADM or ECH valves - Ø 32x8.5x129.7 - Citroen B2 B12 B14

Coupling rod with ball joints - Simca 9 - Aronde - P60

Coupling rod with ball joints - Simca 9 - Aronde - P60Comes with a left ball joint and a right ball jointThis more reliable assembly avoids having to replace the 2 rubber silent blocks.

Steering ball joints RIGHT side - Simca 9 - Aronde - P60

Steering ball joints (right side) - Simca 9 - Aronde - P60

LEFT side steering ball joints - Simca 9 - Aronde - P60

Steering ball joints (left side) - Simca 9 - Aronde - P60

Répartiteur frein - Renault SG2

Engine gaskets kit with cylinder head gasket Renault 817 SG2

Engine gaskets kit with cylinder head gasket Renault 817 SG2

Set of 4 SUMB Marmon brake shoes

" Set of 4 relined brake shoes, in standard exchange. (Send us your set before shipment of the new one) High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes. (non ...

€211.20 TTC
(176,00 € HT)

Engine gasket kit Peugeot D4A D4B 8cv engine

Peugeot D4A and D4B gasket set with 8hp engine, 80 mm bore. Includes cylinder head gasket, liner base gasket, collector gasket, etc.

Copper cylinder head gasket - Citroen trefle 5HP

Copper cylinder head gasket - Citroen trefle

main bearings 53.75mm - dimension 0.25 - without cheek - Citroen HY

main bearings dimension 0.25 -For HY H72 or H78 engine

Carburetor similar to the Solex 32 PBIC Traction Citroen type

New carburettor similar to the Solex 32 PBIC type. Vacuum outlet on foot base. Configuration for Citroen TractionNozzle 26 - Main jet 135 and automatic nozzle 190 - Emulsion19 - Idle 50 - idle air 130 - Needle 1.5 - Float 12.5 gr - Accelerator ...

Set of 4 relined front brake shoes Citroen U23

Set of 4 relined brake shoes (Front) in standard exchange for Citroen U23. Microblasting, varnish, industrial bonding of friction. Strong adhesion.Eliminates the problem of rivets that could damage the drums. Shipping upon receipt of worn ...

€174.00 TTC
(145,00 € HT)

Valve guide - set of 4 - Simca Chambord Versailles

set of 4 valve guides - Simca Chambord Versailles - Aquilon 2350 cc engine - 80 and 84 hpNew period parts and checked.

Jeu de 16 segments Ø72.50 mm - 2.5 x 2.5 x 2.5 x 4

Tie rod ends - Ford Vedette

Set of steering ball joints for Ford Vedette 1949 to 54, Abeille, Vendôme, Comète, Monte Carlo.Includes:- 1 x long ball joint,- 1 x short ball joint.(the adjusting sleeve is not supplied)

Set of 4 Renault Fregate front brake shoes

Set of 4 rear brake shoes in standard exchange. (Send us your game before shipping the new one). High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes.Width 67mm x 280mm

€168.00 TTC
(140,00 € HT)

Segment set Ø 67.50 mm Simca Chambord 2 x 2 x 5 - 8cyl

Segment set Ø 67.50 mm Simca 2 x2 x 5 - 8cyl

segment set 85 mm 2x2x2x4x4 Renault Fregate

Set of 20 segments for 4 eyebolts dimension 85 mm - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 2 mm2 x scraper in 4 mmPossibility of ordering in 85 mm (call us)

copy of Set of segments STD 85.50, oversize 0.50 mm Renault Fregate

Set of 16 segments for 4 pistons, special dimension 85.50 mm reaming - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 3 mm2 x scraper in 4.5 mmPossibility of ordering in 85 mm (call us)

Bearing bearings 53.50mm - dimension 0.50 - without cheek - Citroen HY

Bearing bearings dimension 0.50 -For HY H72 or H78 engine

Pair of front brake cylinders 28.5mm - Panhard 24 - 07/1964 to the endnch nov 57 a end

2 x front wheel cylinder left and right - d 28.57 mm. 3/8 entry Left side mounting. Length 72 mm - inside liquid passage = 8.5 mm. Assembly:

€165.36 TTC
(137,80 € HT)

Front brake cylinders x2 28.5mm - Simca Aronde 500 kg P60 Ranch nov 57 a end

Front wheel cylinder R - d 28.57 mm. 3/8 entry Left side mounting. Length 72 mm - inside liquid passage = 8.5 mm. Assembly:- Simca Aronde 500kg nov 57 to 05/62,- Simca P60 500kg and Ranch 12/59 at the end.

€165.36 TTC
(137,80 € HT)

Front brake cylinders x2 - 28.5mm -Simca Aronde P60 nov 57 a end

Front wheel cylinder R - d 28.57 mm. Entry 3/8 Left mounting. Length 72 mm - inside liquid passage = 8.5 mm.Aronde and P60 from nov 57 end to end of series

€165.36 TTC
(137,80 € HT)

Clutch disc - Citroen B14

Clutch disc Citroen B14.Standard exchange product - reconditioned in France

€164.90 TTC
(137,42 € HT)

Set of 4 rear brake shoes 203 UtilityU8 Peugeot

Set of 4 rear brake shoes - standard exchange. (Send us your set before shipping the new one). High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes.

€162.00 TTC
(135,00 € HT)

New connecting rod for mounting with bearing - Citroen HY engine ID19

New connecting rod for assembly with bearing - Citroen Traction 11hp and 15hp and HY engine ID 19 current 63 and end of series.Supplied without pad. It is advisable to replace all 4 connecting rods at the same time.

Segment set Ø 78 mm Citroen HY 2 x 2.5x4x4 - 4cyl

Segment set Ø 78 mm Citroen Traction 2.5x2.5x4x4 - 4cyl

Segment set Ø 78 mm Citroen Traction U23 HY 3x3x3x4.5 - 4cyl

Segment set Ø 78 mm Citroen Traction 3x3x3x4.5 - 4cyl

Connecting rod bearings set - Peugeot 203 - Peugeot D3 D4 standard dimension

Set of bearings for 4 Peugeot D3 D4 connecting rodsStandard origin dimension. French made.

Set of 4 relined front brake shoes from Simca Versailles

Set of 4 relined brake shoes (Front) for Simca V8 in standard exchange. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets which can damage the drums.Shipping upon receipt of worn parts.

€162.00 TTC
(135,00 € HT)

solid copper cylinder head gasket 2 mm Simca Versailles Chambord

Solid copper cylinder head gasket. Thickness 2 mm. Used with planed cylinder head. For V8 Simca Trianon, Versailles, Régence, Beaulieu, Chambord, Présidence, Marly 1 and 2, Ariane 8. Also exists in 3mm version (available on the shop) Tightening ...

Head gasket 2 mm solid copper Ford Vedette

Solid copper cylinder head gasket. 2mm thickness. Used with planed cylinder head. Tightening to 5m.kg. Mandatory installation with aerosol sealant, available here a>. Measured cylinder head thickness Head gasket type 37.3 mm ...

jauge occasion

Head gasket (2-stage engine) - Peugeot 201

Head gasket (2-stage engine) - Peugeot 201

Set of segments STD 85.50, oversize 0.50 mm Renault Fregate

Set of 16 segments for 4 pistons, special dimension 85.50 mm reaming - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 3 mm2 x scraper in 4.5 mmPossibility of ordering in 85 mm (call us)

Segment set Simca 5 - 52.50 mm 2x2x2x3

Set of 16 segments (4 per piston) - Cylinder bore 52.50 mmComposition:12 waterproof segments, 2 mm high4 scraper segments 3mm high. Non contractual photo.Other dimensions available, contact us to define the height of each segment.

Set of 4 FRONT brake shoes 60mm larg Peugeot 404

Set of 4 relined front brake shoes, in standard exchange. Peugeot 403 (Send us your set before shipping the new one)High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake ...

€158.40 TTC
(132,00 € HT)

clutch master cylinder - Sumb Marmon

clutch master cylinder - Sumb Marmon Part is new  (not old stock)

603 cylinder head gasket Renault side engine 85

Head gasket - Renault lateral 85 - 603.Please note that there are several versions depending on the type of 603. Check the shape with the photo and in particular the igniter passage hole located at the edge of half of the long length.

Citroen HY graphite thrust clutch - 1963 and late

Graphite stopper for Citroen HY from 1963 petrol engine type ID 19

Set of 4 relined front brake shoes for Peugeot D3 D4

Set of 4 front brake shoes width 57 mm relined in standard exchange for Peugeot D3 D3A D3B ... D4 D4A D4B etc. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets that could damage the drums. ...

€156.00 TTC
(130,00 € HT)

Set of 4 relined rear brake shoes for Peugeot D3 D4

Set of 4 rear brake shoes, 46 mm wide. relined in standard exchange for Peugeot D3 D3A D3B ... D4 D4A D4B etc. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets that could damage the drums. ...

€156.00 TTC
(130,00 € HT)

Master cylinder inside pistons 53 mm - NO brake assist - Renault Saviem Sg2

Single circuit master cylinder fits to SG2 Renault or Saviem. NO break assist. Internal diameter (piston) 28.57 mm bettween fixing holes : 60 mm 2 exits 7/16 mm (mesure prise sur le raccord mâle venant de canalisation = 11.1 mm)

€156.00 TTC
(130,00 € HT)

Valves x 4 - ECH Ø 32x8x120 - Peugeot 203

Set of 4 ECH valves Ø 32x8x120 - Peugeot 203

Valves x 4 - ECH Ø 32.5x8.5x120 - 45 ° - Peugeot 203

Set of 4 ECH valves Ø 32.5x8.5x120 - 45 ° - Peugeot 203

Valves x 4 - ADM Ø 35x8x120 - 60 ° - Peugeot 203

Set of 4 ADM valves Ø 35x8x120 - 60 ° - Peugeot 203

Brake line - from 200 to 250 cm

Brake line remanufactured on request, only in copper diameter 6.35 mm. Provide model (length and 2 original tips)Shipping after receipt of your model.

Valves x 4 - ADM ECH Ø 25x7.49x106 - Citroen 5cv Trefle

Set of 4 ADM ECH valves Ø 25x7.49x106 - Citroen 5cv Trèfle

STD segment set 88mm Renault Fregate 3x3x4.5x4.5

Set of 16 segments for 4 pistons Ø 88 mm dimension - 668 or 671 Renault petrol engine.composition per piston:2 x compression in 3 mm2 x scraper in 4.5 mmPossibility of ordering in 85 mm (call us)

Segment set STD 88mm 3x3x3x4.5 Renault Fregate

Set of 16 segments for 4 eyebolts dimension 88 mm - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 3 mm1 x scraper in 4.5 mmPossibility of ordering in 85 mm (call us)

Water pump repair kit with aluminum impeller - Ford Vedette

Repair kit for water pump for "Y" or "T" pump body - years 1949-54. New axle is 16mm instead of 12 mm. So you need to drill body 16.5 mm. We recommend correcting the seat of the rotating joint at the back of the body.

Set Segments Ø 56.50 2.5x2.5xscraper 2.5xscraper .5 - Rosengart LR (set of 16)

Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 56.50- 4 x fire segment h 2.5mm- 4 x compression h 2.5mm- 8 x scraper h 2.5 mmPlease note that the scrapers are Ø 56.84 mm. Review the game at the cupContact us ...

side shim set bearing +0.20 mm - Simca Aronde Ariane RUSH 6 and 7 hp engine

side shim set bearing - Simca Aronde Ariane RUSH 6 and 7 hp engineoversized + 0.20 mm

Clutch disc 250 mm Renault Galion SG2

Reconditioned Ø250 mm clutch disc, in standard exchange for Renault Galion Sg2. Complete disassembly, micro-blasting and painting. (The sending is done after receipt of the used mechanism, not destroyed)(Depending on the year, non-contractual photo)

€150.00 TTC
(125,00 € HT)

Segment set Simca 5 - 53.50 mm 2x2x2x3

Set of 16 segments (4 per piston).Composition:Cylinder bore 53.50 mm12 waterproof segments, 2 mm high4 scraper segments 3mm highOther dimensions available, contact us.

Segment set Simca 5 - 52 mm - 2x2x3x3

Set of 16 segments (4 per piston).Composition:Cylinder bore 52 mm8 waterproof segments, 2 mm high8 scraper segment height 3mmOther dimensions available, contact us.

Segment set Simca 5 - 53 mm 2x2x2x3

Set of 16 segments (4 per piston).Composition:Cylinder bore 53.00 mm12 waterproof segments, 2 mm high4 scraper segment height 3mmOther dimensions available, contact us.

Segment set Simca 5 - 52.50 mm 2x2x3x3

Set of 16 segments (4 per piston).Composition:Cylinder bore 52.50 mm8 waterproof segments, 2 mm high8 scraper segment height 3mmOther dimensions available, contact us.Contact us to define the height of each segment.

Master cylinder inside piston 20mm - with brake assist - Renault Saviem Sg2

Single circuit master cylinder for SG2 Renault or Saviem from 1970 to end of series. Current product of French manufacture.

€150.00 TTC
(125,00 € HT)

joint lunette arriere Ford Anglia

603 gasket kit (without cylinder head gasket) - Renault lateral engine 85

gasket kit (without cylinder head gasket) - Renault engine 603 side 85Please note that there are several versions depending on the type of 603. Check the shape with the photo and in particular the igniter passage hole located at the edge of half ...

STD segment set 85 mm 3x3x3x4.5 Renault Fregate

Set of 16 segments for 4 eyebolts dimension 85 mm - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 3 mm1 x scraper in 4.5 mmPossibility of ordering in 85 mm (call us)

Segment set Standard 88mm 2x2x4.5x4.5 Renault Fregate

Set of 16 segments for 4 eyebolts dimension 88 mm - 668 or 671 Renault petrol engine.composition per piston:2 x compression in 2 mm2 x scraper in 4.5 mmPossibility of ordering in 85 mm (call us)

STD segment set 88mm Renault Fregate 2x2x2x4.5

Set of 16 segments for 4 pistons Ø 88 mm dimension - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 2 mm1 x scraper in 4.5 mmPossibility to order in 85 mm (contact us)

Valves x 4 - ADM Ø 37x9x101.6 - Citroen Traction 11 perfo - HY Perfo engine - U23 flat wings

Set of 4 ADM valves Ø 37x9x101.6 - Citroen Traction 11 perfo - HY from 1955 to 63 Perfo engine - U23 flat wings

Water pump repair kit - Simca Versailles Chambord

Repair kit for water pump Simca Versailles, Chambord, Marly etc.Includes a bearing axle + sealing ring ("cyclam"). It is advisable to rectify the seat on the body (glass) before fitting a new rotating joint. Refer to the technical review for ...

Master cylinder Panhard PL17 assembly Record 04/1962 at the end - SILICONE

Complete master cylinder for PL17 sedan, utility, Z1 from 04/1962 for a Record type assembly. Includes:For use 100% SILICONE. Otherwise choose the reference for the DOT fluid.- 22mm master cylinder- 3-way 7/16 connection- stop switch- 2 x copper ...

€147.72 TTC
(123,10 € HT)

Set of 2 deflector gaskets - Peugeot 203 sedan

Set of 2 deflector gaskets - Peugeot 203 sedan

Master cylinder - Ø 22 mm - Simca 1000

Master cylinder - Ø 22 mm

€147.30 TTC
(122,75 € HT)

Valves x 4 - ADM ECH Ø 35x9x138 - 60 degrees - Citroen C4G C6G

Set of 4 ADM ECH valves Ø 35x9x138 - 60 degrees - Citroen C4G C6G

Master cylinder - Nov 57 to 06/62 - Simca utility 500kg

Complete master cylinder. Diameter 25.4 mm.Dovetail BreakUtility 500 kgNov. 57 => May 62P60 500 kgDec. 1959 => End of seriesRanch 1960

€146.04 TTC
(121,70 € HT)

Master cylinder from dec 59 to dec 63 - Simca Aronde P60

Complete master cylinder. Diameter 25.4 mm. Assembly from dec 59 to dec 63e:- P60, Montlhéry, Etoile 6 and 7cv, Elysée, from December 1959 to December 1963,

€146.04 TTC
(121,70 € HT)

Segment set Ø 80 mm Peugeot 203 403 - 8cv - 2x2x4.5

Segment set Ø 80 mm Peugeot 203 403 - 8cv - 2x2x4.5

Segment set Ø 65 mm Peugeot 201 - 2.5x2.5x2.5x2.5x2.5

Set of 20 segments Ø 65 for Peugeot 201: 2.5x2.5x2.5x2.5x3.5 Review the clearance in the cut BEFORE assemblyNon contractual photo

Segment set Ø 64.50 mm Peugeot 201 - 3x2.5x2.5x3.5x2.5

Set of 20 segments Ø 64.50 for Peugeot 201: 3x2.5x2.5x3.5x2.5Attention the 3rd position compression segment is delivered in Ø 65mm.Review the clearance in the cut BEFORE assemblyNon contractual photo

jeu 16 segments 68 mm x 2 x 2,8 C5P - segments avec ézaulement

Guide ADM ECH fonte - Citroen Rosalie

Guide ADM ECH fonte - Citroen Rosalie

Ford Vedette disc clutch

Clutch disc reconditioned, in standard exchange for Ford Vedette. Complete disassembly, micro balling and painting. (The sending is done after receipt of the used mechanism, not destroyed)(Depending on the year, non-contractual photo)

€144.00 TTC
(120,00 € HT)

Simca Versailles Chambord disc clutch

Clutch disc reconditioned, in standard exchange for Simca Versailles, Chambord and derivates. Complete disassembly, micro balling and painting. (The sending is done after receipt of the used mechanism, not destroyed)(Depending on the year, ...

€144.00 TTC
(120,00 € HT)

Simca Versailles rear wheel hub kit

" Rear hub repair kit for one wheel: Simca Trianon, Versailles, Régence, Marly 1 1 bearing 1 adapter spacer 1 depth wedge The shim and the spacer are placed towards the wheel, flat side of the bearing towards the center of the bridge (see photo n ...

Set of 4 Ford Vedette rear jaws - 1949 to 1952

Set of 4 rear brake shoes in standard exchange. (Send us your set before shipping the new one) High performance friction, applied by industrial gluing, no more rivets which damage the drums. Pickled and varnished jaws.

€144.00 TTC
(120,00 € HT)

Wheel bearing 90 x 45 x 50 mm - front or rear hub - Citroen HY

Wheel bearing - front or rear hub - Citroen HY - quality manufacturing.90 x 45 x 50mm.

Rear brake cylinder 34.9mm - SUMB Marmon

For Simca SUMB Marmon and other heavy-duty derivatives.Complete rear wheel cylinder 1'3 / 8 (34.93 mm).

€143.52 TTC
(119,60 € HT)

Brake master cylinder Ø 31.75 mm - Peugeot 202 UH

Master cylinder complete with bellows: D 1'1 / 4 or 31.75 mm - inlet 3/4 - 16 f outlet 1/2 - 20fEntry in 18 mm. If the old model was 22mm, order the adapter here.Peugeot 202 UH

€142.80 TTC
(119,00 € HT)

Brake master cylinder Ø 31.75 mm - Peugeot D3

Master cylinder complete with bellows: D 1'1 / 4 or 31.75 mm - inlet 3/4 - 16 f outlet 1/2 - 20fEntry in 18 mm. If the old model was 22mm, order the adapter here.Peugeot D3

€142.80 TTC
(119,00 € HT)

Brake master cylinder 31.7 mm - Renault Colorale Prairie R2087 Goelette

" Complete master cylinder with bellows: D 1'1 / 4 or 31.75 mm - inlet 3/4 - 16 f outlet 1/2 - 20f Entry in 18 mm. If the old model was 22 mm, order the adapter here . p> For Renault Prairie, Colorale, R2087, Goélette, R2065, R2066, Galion ...

€142.80 TTC
(119,00 € HT)

Rear window seal Ford Vedette 1949-52

Rear window seal, welded, for Vedette Saloon 1949 to 52.

Valves x 4 - ADM ECH Ø 32x8x129.7 - Citroen B2 B12

Set of 4 ADM ECH valves Ø 32x8x129.7 - Citroen B2 B12

Master cylinder Panhard PL17 assembly Record 04/1962 at the end - DOT

Complete master cylinder for PL17 sedan, utility, Z1 from 04/1962 for a Record type assembly. Includes:For DOT liquid use. Otherwise choose the reference for the 100% SILICONE liquid.- 22mm master cylinder- 3-way 7/16 connection- stop switch- 2 x ...

€142.02 TTC
(118,35 € HT)

Clutch disc Citroen U23

Clutch disc reconditioned, in standard exchange for Citroen U23 and derivatives. Complete disassembly, micro balling and painting. (The sending is done after receipt of the used mechanism, not destroyed)(Depending on the year, non-contractual photo)

€141.60 TTC
(118,00 € HT)

Water pump turbine - Simca Versailles Chambord

New aluminum impeller, machined in the mass, for water pump V8 Simca Versailles, Chambord, Aquilon type engine.Very neat French manufacture.

€141.20 TTC
(141,20 € HT)

rear brake cylinder 44.5mm - citroen U23

Rear brake cylinder d 44.50 mm (1'3 / 4). French made

€141.00 TTC
(117,50 € HT)

Segment set Ø 52.4 mm Simca 6 - 2x2x2x3x2 - 4cyl

Segment set Ø 52.40 or 52.50 depending on availability.Cutting clearance to be adjusted before assembly. Non-contractual photo - no return or refund possible.

Valves x 4 - ADM Ø 25x7.98x106 - Citroen 5cv Trefle

Set of 4 ADM valves Ø 25x7.98x106 - Citroen 5cv Trèfle

Clutch disc 225mm - Renault Prairie, Goelette, R2087

Clutch disc reconditioned, in standard exchange for Renault Prairie, Colorale, R2087, Goélette, 1000kg and derivatives. Complete disassembly, micro-blasting and painting. (The sending is done after receipt of the used mechanism, not ...

€139.20 TTC
(116,00 € HT)

Set of 4 relined rear brake shoes Simca Chambord

Set of 4 relined brake shoes (AR) for Simca V8 in standard exchange. Microblasting, varnish, industrial bonding of friction. Strong adhesion. Eliminates the problem of rivets which can damage the drums.Shipping upon receipt of worn parts.

€139.20 TTC
(116,00 € HT)

Set of 4 rear brake shoes 403 UtilityU8 Peugeot

Set of 4 rear brake shoes - standard exchange. (Send us your set before shipping the new one). High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes.

€139.20 TTC
(116,00 € HT)

Set of 4 front brake shoes Mercedes 190 SL

Set of 4 front brake shoes in standard exchange. (Send us your set before shipping the new one)High performance friction, applied by industrial bonding, no more rivets damaging the drums. Micro blunt brake shoes.(Non contractual photo)

€139.20 TTC
(116,00 € HT)

SUMB Marmon disc clutch

Clutch disc reconditioned, in standard exchange for SUMB Marmon. Complete disassembly, micro balling and painting. (The sending is done after receipt of the used mechanism, not destroyed)(Depending on the year, non-contractual photo)

€139.20 TTC
(116,00 € HT)

Segment set 2 x 2 x 4.5 - STD 88 mm Renault R2087

Set of 12 segments for 4 pistons dimension 88 mm - 671 Renault petrol engine.composition per piston:2 x compression in 2 mm1 x scraper in 4.5 mmNon contractual photo

Set of 34 Simca Chambord V8 cylinder head screws

Set of 34 black phosphated hexagonal head screws - 2 screw lengths in the set. Withstands up to 6 m.kgMounts on Simca Beaulieu, Chambord, Presidency Marly 2.

Set of 34 cylinder head screws V8 Simca Versailles 12V model 57'

Set of 34 black phosphated hexagonal head screws - 2 screw lengths in the set. Withstands up to 6 m.kgMounts on Simca Versailles (Trianon Régence Marly 1) original 12V model only. 57' model vehicle

Simca V8 cylinder head screw set

Set of 34 black phosphated hexagonal head screws - 2 screw lengths in the set. Resists up to 6 m.kg

Ford Vedette cylinder head bolt set

Set of 34 hexagon head screws to replace the original studs - 3/8 16f / p unc 2 lengths of screws in the set - Allows easy removal of cylinder heads. Tightening 5 m.kg maximum

Biellette direction (jeu de 2) - Renault 4cv 2nde génération et Dauphine

Bielle neuve pour montage avec coussinet - Citroen Traction 11cv et 15 cv

Set of 4 front brake shoes 403 Utility U8 - 50mm - Peugeot

Set of 4 front brake shoes - width 52 mm - standard exchange. (Send us your set before shipping the new one). High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes.

€138.00 TTC
(115,00 € HT)

Citroën Traction 11D engine cover

Engine seal kit for Citroen Traction 11D engine(fitted with cast iron cylinder head and sheet metal cylinder head cover).

Master cylinder Panhard Dyna Record mount - 25.4 mm - SILICONE

Complete master cylinder for Dyna - Record type mounting. Includes:For liquid use 100% SILICONE. Otherwise choose the reference for the traditional DOT.- master cylinder 25.4 mm- 3-way 7/16 connection- stop switch- 2 x copper gasket

€137.28 TTC
(114,40 € HT)

Master cylinder Panhard Dyna Record mount - 25.4 mm - DOT

Complete master cylinder for Dyna - Record type mounting. Includes:For DOT liquid use. Otherwise choose the reference for the 100% SILICONE liquid- master cylinder 25.4 mm- 3-way 7/16 connection- stop switch- 2 x copper gasket

€137.28 TTC
(114,40 € HT)

Rear window seal Ford Vedette Coupe

Rear window seal, welded, for Coupé Vedette.

Renault Fregate rear brake shoe set 4

Set of 4 rear brake shoes in standard exchange. (Send us your game before shipping the new one)High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes.Width 52 x 267 and 280 mm

€135.00 TTC
(112,50 € HT)

Set of 4 front brake shoes 45 mm - HY or type H Citroen - until 02/1962

Set of 4 front brake shoes - standard exchange. (Send us your set before shipping the new one). High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake shoes.

€134.90 TTC
(112,42 € HT)

Set of 4 rear brake shoes Mercedes 190 SL

Set of 4 rear brake shoes in standard exchange. (Send us your set before shipping the new one)High performance friction, applied by industrial bonding, no more rivets damaging the drums. Micro billed and varnished brake shoes.(Non contractual photo)

€134.40 TTC
(112,00 € HT)

Front brake cylinder 28.5 mm - citroen U23

Front brake cylinder d 28.57 mm (1'1 / 8). French made

€133.56 TTC
(111,30 € HT)

Rear brake cylinder 28.5 mm - citroen U23

Rear brake cylinder d 28.57 mm (1'1 / 8). French made

€133.56 TTC
(111,30 € HT)

Disc clutch WITH spring 215mm - Citroen HY

Clutch disc reconditioned, in standard exchange for Citroen HY, type H, U23 and derivatives. Complete disassembly, micro balling and painting. (The sending is done after receipt of the used mechanism, not destroyed)(Depending on the year, ...

€132.00 TTC
(110,00 € HT)

Set of 4 rear brake shoes Peugeot 404

Set of 4 REAR brake shoes relined, in standard exchange. Peugeot 403 (Send us your set before shipping the new one)High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished jaws.(Non ...

€132.00 TTC
(110,00 € HT)

Segment set Ø 52 mm - Simca 6 - 2x2x2x3 - 4cyl

Segment set Ø 52 for Simca 6Cutting clearance to be adjusted before assembly. Non-contractual photo - no return or refund possible.

Segment set Ø 75 mm Peugeot 203 403 - 7cv - 2x2x4.5

Segment set Ø 75 mm Peugeot 203 403 - 7cv - 2x2x4.5

Valves x 4 - ADM Ø 35x8.5x116.4 - Peugeot 203

Valves x 4 - ADM Ø 35x8.5x116.4 - Peugeot 203

Valves x 4 - ADM ECH Ø 35x9.5x137.50 - 60 ° - Citroen C4 C6F

Valves x 4 - ADM ECH Ø 35x9.5x137.50 - 60 ° - Citroen C4 C6F

Segment set Ø 75 mm Peugeot 203 403 - 7cv - 2.5x2.5x4.5

Segment set Ø 75 mm Peugeot 203 403 - 7cv - 2.5x2.5x4.5

Segment set Ø 80 mm Peugeot 403 - 2cx2x4.5x4.5

Segment set Ø 80 mm Peugeot 403 - 2cx2x4.5x4.5

Set of 4 front brake shoes - 53 mm - Peugeot 403

Set of 4 relined front brake shoes, in standard exchange. Peugeot 403 (Send us your set before shipping the new one)High performance friction, applied by industrial bonding, no more rivets that damage the drums. Pickled and varnished brake ...

€132.00 TTC
(110,00 € HT)

Clutch disc Citroen HY U23

Clutch disc reconditioned, in standard exchange for Citroen HY, type H, U23 and derivatives. Complete disassembly, micro balling and painting. (The sending is done after receipt of the used mechanism, not destroyed)(Depending on the year, ...

€132.00 TTC
(110,00 € HT)