Front brake cylinder 31.75 mm - SAMBRON
Front brake cylinder - Ø 31.75 mm - Sambron
(69,50 € HT)
Adapter connection 7/16 male - 3/8 female
Adaptateur freinage mâle 7/16 (envion 11mm) femelle 3/8
(17,50 € HT)
Master cylinder kit 38.1 mm - Renault Galion
Repair kit for 38.1 mm master cylinder.
(74,75 € HT)
Brake cylinder 28.5mm - entry 11mm (7/16th) - Peugeot Q3A
Brake cylinder 28.5mm - entry 11mm (7/16th) -
(65,00 € HT)
Remise en état lot de pièces spécifiques
(90,00 € HT)
segment set 85 mm 2x2x2x4x4 Renault Fregate
Set of 20 segments for 4 eyebolts dimension 85 mm - 668 or 671 Renault petrol engine.composition per piston:3 x compression in 2 mm2 x scraper in 4 mmPossibility of ordering in 85 mm (call us)
(138,00 € HT)
copy of Oil pressure contact mano - Ford Vedette 1949 - 54
oil pressure switch for Ford Vedette engine from 1949 to 1954 - Thread M 10x100
(10,50 € HT)
Best Sellers
Ignition capacitor 6, 12 and 24V
6.12V and 24V compatible ignition capacitor.
(12,00 € HT)
Rubber teat end for brake reservoir
" Flexible connection for brake reservoir. (100% rubber compatible with lockheed and silicone) Must be fitted with the metal insert to prevent tearing and accidental emptying of the liquid reservoir. "
(9,00 € HT)
Rear brake cylinder 28.57 mm - 1 1/8 Renault Colorale, Prairie, R2087, Goelette
" Rear wheel cylinder. Diam: 1" "1/8 or 28.6 mm. Liquid inlet diameter = 11.4 mm (1/2 20 f / p) Renault Colorale, Prairie, R2087, Goélette, 1000 kg, 1400 Kg and derivatives . "
(75,35 € HT)
Front brake cylinder kit 34.9 mm - 1 3/8 Renault Prairie R2087 Goelette
Repair kit for AV cylinder. d 34.93 mm
(16,00 € HT)
Pipe connector 1/2 20 UNF - tube 6.35 mm - external thread 12.5 mm
Rigid brake line nut. 1 / 2-20 UNF or Ø 12.5 mm - drilling for 6.35 mm tube (1/4 p)
(4,35 € HT)
Ignition - 4 x Spark plugs for Renault Fregate
Set of 4 NGK spark plugs with std base (14 mm), Renault Fregate, Colorale, Prairie engine (side engine 603 and tumbled 668 or 671), R2087, Goélette, Galion, SG2 gasoline (engine 671 or 817) etc. Compatible with SP95 and SP98 fuels
(20,00 € HT)
Best sellers There are 1559 products.
Clutch disc - Citroen B14
Clutch disc Citroen B14.Standard exchange product - reconditioned in France
(137,42 € HT)
connecting rod bearing 0.25 - Ø 43.75 - FLASH - RUSH 7CV - RUSH SUPER M - Simca Aronde Ariane and 1300 1301
Set of bearings for connecting rods dimension 0.25 - Ø 43.75Mounts on engine type 312 -316 -FLASH - RUSH 7CV - RUSH SUPER MFor vehicle:- Dovetail motor FLASH or RUSH 7hp,- Ariane with RUSH and RUSH Super M engines,- SIMCA 1300 and 1301(Not ...
(219,00 € HT)
Rod bearings (set) 48 mm STD side - Citroen Traction 11D - HY - U23
Set of 48.00 mm connecting rod bearings - original STD dimension - Citroen Traction 11D - HY - U23Mounts on engines equipped with bearing connecting rods.
(85,00 € HT)
Set of 4 complete pistons (piston pin) Ø 59.00 mm - Renault NN
Set of 4 complete pistons (pin segments clips) Ø 59.00 mm - Renault NN -
(615,00 € HT)
Citroen HY graphite thrust clutch - 1963 and late
Graphite stopper for Citroen HY from 1963 petrol engine type ID 19
(130,00 € HT)
Ignition finger igniter Ducellier 65mm
Finger for Ducellier distributor equipped with a 65mm headMounts with Ducellier 65 mm head
(11,25 € HT)
Pistons complets - jeu de 4 - Ø 53.50 mm - Simca 5
Set of 4 piston Ø 53.50 mm - Simca 5.
(540,00 € HT)
Rouleau étanchéité
(2,50 € HT)
side shim set bearing - Simca Aronde Ariane RUSH 6 and 7 hp engine
side shim set bearing - Simca Aronde Ariane RUSH 6 and 7 hp engine larg : 2.335 mm - original size
(96,00 € HT)
Citroën Traction gearbox outlet repair sleeve
Repair sleeve (speedi sleeve) for gearbox outlet. To slide on the worn part to repair the worn part (marked) by the spinnaker. Fit new spinnakerFor one side.
(28,00 € HT)
Clutch mechanism type 2 - fits to clutch disq springless - Citroen HY
Clutch mechanism reconditioned, in standard exchange mounted on HY engine (aluminum cylinder head).Complete disassembly, micro balling, surfacing and retaring of the pressure plate.(The sending is done after receipt of the used mechanism, not ...
(265,00 € HT)
Bearing 35 72 17 gearbox groove C2 for Peugeot 203
35x72x17 bearing with locking groove, special Peugeot 203 C2 gearbox
(37,50 € HT)
Charger and maintenance 6v / 12v Accumate
AccuMate is designed to automatically charge and monitor batteries without the danger of overcharging them, regardless of plug-in time. AccuMate is available for all 6V and 12V lead acid batteries, making it a perfect accessory for owners of ...
(60,00 € HT)
Ignition head SEV 58 mm
Head for SEV igniter: Interlocking inside the igniterØ socket 58 mm
(30,00 € HT)
270mm float fuel gauge - 6V
" Float fuel gauge. Adaptable model. Arm length approx. 270 mm. External plate diameter 54 mm - fixing center distance 38 mm. Supplied with cork seal. 3-hole fixing. Internal resistance about 110 ohms and vehicle in 6V. "
(41,58 € HT)
gearbox spinnaker ring - Simca Aronde P60 Ariane
gearbox spinnaker ring - Flash or RUSH engine - Simca Aronde P60 Arianesize 50 x 32. Please check the size according to your box model.
(8,00 € HT)
Piston Ø 70.50 mm - set of 4 complete - Renault Mona 4 - Celta 4
Piston Ø 70.50 mm - Renault Mona 4 - Celta 4 - Set of 4 complete pistons with piston rings and cilps.
(635,00 € HT)
Sandblasting tablet 52 mm pump side Peugeot 203 403
1 pellet diam. 52mm on cylinder head, behind water pump
(8,25 € HT)
Set of 8 pistons 66.04 Ford Vedette
Set of 8 pistons - New manufacture, similar to the original model - reduction in piston mass (approximately 255 gr with rings) - molybdenum treatment - cylinder dimension 66.04 mm. Supplied with segments, pins and circlips - The segments supplied ...
(1 290,00 € HT)
Segments set Ø 56.00 2.5x2x2.5x4 - Rosengart LR (set of 16)
Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 56.00Contact us for other dimensions.
(199,17 € HT)
Exhaust collar flange Ø 45mm
Flange for exhaust connection (clamp with caliper) Ø 45 mm
(7,50 € HT)
Piston Ø 71.00 mm - set of 4 complete - Renault Mona 4 - Celta 4
Piston Ø 71.00 mm - Renault Mona 4 - Celta 4 - Set of 4 complete pistons with piston rings and cilps.
(615,00 € HT)
Segment set Ø 72 mm Simca 2.5x2.5x2.5x5 - 4cyl
Segment set Ø 72 mm Simca 2.5x2.5x2.5x5 - 4cyl
(75,00 € HT)
Segment set Ø 80 mm Peugeot 403 - 2cx2x4.5x4.5
Segment set Ø 80 mm Peugeot 403 - 2cx2x4.5x4.5
(110,00 € HT)
Sandblasting tablets x 2 - 60 mm cylinder head Peugeot 203 403
Set of 2 pellets diam. 60mm on cylinder head for Peugeot 203-403
(15,00 € HT)
Set of 8 pistons 66.04 Simca Versailles Chambord
Set of 8 pistons original dimension (66.04 mm) complete (with segments, pins and clips). Aluminum body, quality segmentation with spring-loaded oil scrapers. Flat heads. Mounts on Simca Trianon, Versailles, Régence, Beaulieu, Chambord, ...
(1 194,00 € HT)
Set of 8 pistons 67.00 Ford Vedette
Set of 8 pistons - New manufacture, similar to the original model - reduction in piston mass (approx. 255 gr with segments) - molybdenum treatment - cylinder dimension 67.00 mm. Supplied with segments, pins and circlips - The segments supplied ...
(1 290,00 € HT)
Piston Ø 71.50 mm - set of 4 complete - Renault Mona 4 - Celta 4
Piston Ø 71.50 mm - Renault Mona 4 - Celta 4 - Set of 4 complete pistons with piston rings and cilps.
(664,00 € HT)
Speedometer cable - Peugeot 203 - all models
Speedometer cable for Peugeot 203 convertible, sedan, commercial pick-up, all models (Non-contractual photo)
(45,00 € HT)
Set of 8 pistons 67.00 Simca Versailles Chambord
Set of 8 pistons dimension 67.00 mm, complete (with segments, pins and clips). Aluminum body, quality segmentation with spring-loaded oil scrapers. Flat heads. Mounts on Simca Trianon, Versailles, Régence, Beaulieu, Chambord, Présidence, Marly I ...
(1 194,00 € HT)
Set of 8 pistons 67.50 Ford Vedette
Set of 8 pistons - New manufacture, similar to the original model - reduction in piston mass (approximately 255 gr with rings) - molybdenum treatment - cylinder size 67.50 mm. Supplied with segments, pins and circlips - The segments supplied are ...
(1 290,00 € HT)
Rod bearings Renault Goelette Fregate dimension 0.50 - 54.50 mm
Set of 8 connecting rod bearings (with lubricating hole for the connecting rod) dimension 0.25 crankpin d 44.50 mm - Renault, Colorale, Goélette, R2087, Frégate, SG2, etc).Mounts on engine 668 - 11cv - 2L, 671 - 12cv - 2.2 L and Super Etendard ...
(267,50 € HT)
Regulator converter 12v to 6V for wiper motor
(55,00 € HT)
Engine gaskets kit - Simca 9 - 1221 cm3 engine
Gasket set with cylinder head gasket for Aronde Simca 9 - 1221 cm3 engineIncludes engine gaskets including cylinder head gasket, and oil seal ring for crankshaftNon contractual photo. Not suitable for Flash or Rush engines.
(204,75 € HT)
Set of 8 pistons 67.50 Simca Versailles Chambord
Set of 8 pistons dimension 67.50 mm, complete (with segments, pins and clips). Aluminum body, quality segmentation with spring-loaded oil scrapers. Flat heads. Mounts on Simca Trianon, Versailles, Régence, Beaulieu, Chambord, Présidence, Marly I ...
(1 194,00 € HT)
Oil pressure switch - Fregate Prairie Goelette R2087
Oil pressure switch for Renault Fregate, Colorale, Prairie (side engine 603 and tumbled 668 or 671), R2087, Goelette, Galion, SG2 petrol engine (engine 671 or 817). Thread 14x150.
(8,70 € HT)
Clutch disc 230mm - standard exchange - Ford Vendome - Montecarlo
Disque d'embrayage reconditionné - en échange standard.
(99,92 € HT)
Set of 8 pistons 66.50 Ford Vedette
Set of 8 pistons - New manufacture, similar to the original model - reduction in piston mass (approximately 255 gr with rings) - molybdenum treatment - cylinder dimension 66.50 mm. Supplied with segments, pins and circlips - The segments supplied ...
(1 290,00 € HT)
Mechanism clutch 9L18 - Ford Vendome - Montecarlo
Clutch mechanism reconditioned, in standard exchange.Complete disassembly, micro balling, surfacing and retaring of the pressure plate.(The sending is done after receipt of the used mechanism, not destroyed - Depending on the year, ...
(442,00 € HT)
Electronic ignition - Citroën HY
123 Ignition electronic ignition for Citroën Type H 4 cylinders, "Perfo" or "11D" engine.Installs in place of your original model. Everything is integrated in the body of the igniter (no remote box).Supplied with adjustment and assembly ...
(291,63 € HT)
Segment set Ø 75 mm Peugeot 203 403 - 7cv - 2.5x2.5x4.5
Segment set Ø 75 mm Peugeot 203 403 - 7cv - 2.5x2.5x4.5
(110,00 € HT)
Aviation collex type paste gasket for cylinder head - 117ml
Sealing paste to be applied on both sides of a cylinder head gasket. Product similar to "Collex". Leave to evaporate for about 30 min at room temperature after application, then fit the gasket - improves the seal - recommended with solid copper ...
(22,00 € HT)
Set of 8 pistons 66.50 Simca Versailles Chambord
Set of 8 pistons dimension 66.50 mm, complete (with segments, pins and clips). Aluminum body, quality segmentation with spring-loaded oil scrapers. Flat heads. Mounts on Simca Trianon, Versailles, Régence, Beaulieu, Chambord, Présidence, Marly l ...
(1 194,00 € HT)
Bague cuivre pour mâchoire Citroen
(17,50 € HT)
PSX 44 45 carbon brushes - for Paris Rhone D8 starter - Simca Aronde - 1000
2 PARIS RHONE PSX 44 45 starter brushesDimension 7 x 15 x 14D8E26,29,34,40L13.17Simca 1000 carsMassey Ferguson tractors
(20,00 € HT)
Valves x 4 - ADM Ø 35x8x120 - 60 ° - Peugeot 203
Set of 4 ADM valves Ø 35x8x120 - 60 ° - Peugeot 203
(129,00 € HT)
Coussinets bielle moteur Renault Frégate cote STD - 52 mm
Jeu de 8 coussinets de bielle cote STD maneton d 52.00 mm - Fregate moteur 668 - 11cv - 2L (ancien stock neuf)
(427,50 € HT)
Set Segments Ø 56.50 2.5x2.5xscraper 2.5xscraper .5 - Rosengart LR (set of 16)
Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 56.50- 4 x fire segment h 2.5mm- 4 x compression h 2.5mm- 8 x scraper h 2.5 mmPlease note that the scrapers are Ø 56.84 mm. Review the game at the cupContact us ...
(125,00 € HT)
Valves x 4 - ECH Ø 32.5x8.5x120 - 45 ° - Peugeot 203
Set of 4 ECH valves Ø 32.5x8.5x120 - 45 ° - Peugeot 203
(129,00 € HT)
FLEXIBLE 17MM - 3/8 24F - LONG 320
(29,50 € HT)
connecting rod bearing STD - Ø 40.00 - Simca 9 - 1200 cm3
connecting rod bearing STD - Ø 40.00 - Simca 9 - 1200 cm3(does not mount on Flash or Rush)
(195,83 € HT)
Bearing bearings dimension 50.00 mm (STD) - Citroen Traction HY U23
Bearing bearings dimension 50.00 (STD) -Citroen:- Traction Perfo and 11D - HY until 1963 ("Traction" type engine)- U23
(410,00 € HT)
Valves x 4 - ECH Ø 32x8x120 - Peugeot 203
Set of 4 ECH valves Ø 32x8x120 - Peugeot 203
(129,00 € HT)
Base gasket x4 - Ø 93 thickness 1.00 mm- Renault Fregate etc.
Set of 4 base gaskets (sleeve d 93mm) all copper thickness 1mm (approximately) for Renault type 671 engine (Colorale, Goélette, R2087, Frégate, etc.)
(45,00 € HT)
copy of Inclined banjo + hollow screw + 2 joints for connection on Simca 6 cylinder
Inclined banjo with 17mm inlet (11 / 16th) + 7 / 16th hollow screw + 2 seals for Simca 6 cylinder liquid inlet connection
(28,00 € HT)
connecting rod bearing 0.25 - Ø 39.75 - Simca 9 - 1200 cm3
connecting rod bearing 0.25 - Ø 40.00 - Simca 9 - 1200 cm3(does not mount on Flash or Rush)
(240,00 € HT)
Bearing bearings dimension 49.75 mm (0.25) - Citroen Traction HY U23
Bearing bearings dimension 49.75 (0.25) -Citroen:- Traction Perfo and 11D - HY until 1963 ("Traction" type engine)- U23
(398,00 € HT)
Valves x 4 - ECH Ø 32.5x8.5x115.9 - Peugeot 203 - 403
Valves x 4 - ECH Ø 32.5x8.5x115.9 - Peugeot 203 - 403
(109,50 € HT)
Bearing 6203 - 17x40x12
Bearing - 17x40x12 waterproof (often used on dynamo, water pump, flywheel center, etc.). Check with the dimensions of your bearing.
(9,00 € HT)
Renault Fregate front cylinder head gasket
cylinder head plate gasket for renault fregate engine or similar.Model for distribution side.
(5,00 € HT)
High engine gaskets kit - Simca 9 - 1221 cm3 engine
TOP ENGINE gaskets kit with cylinder head gasket for Aronde Simca 9 - 1221 cm3 engine.Non contractual photo. Not suitable for FLash or RUSH engines.
(104,47 € HT)
Bearing bearings dimension 49.50 mm (0.50) - Citroen Traction HY U23
Bearing bearings dimension 49.50 (0.50) -Citroen:- Traction Perfo and 11D - HY until 1963 ("Traction" type engine)- U23
(398,00 € HT)
Set 4 cylinder seals - Peugeot 203 403 8cv - 80mm
Set 4 cylinder seals - Peugeot 203 403 8cv - 80mm
(16,58 € HT)
Valves x 4 - ADM Ø 37x8.5x116.4 - Peugeot 203 - 403
Set of 4 ADM valves Ø 37x8.5x116.4 - Peugeot 203 - 403
(116,67 € HT)
sticker ford oil filter
Oil filter sticker. Mounts on Ford V8 Vedette, Vendôme, Comète, Monte Carlo etc.
(9,63 € HT)
Renault Fregate water pump seal
water pump gasket for Renault Fregate engine or similar
(6,00 € HT)
Simca 9 Aronde P60 transmission shaft cross member all models
Simca 9 Aronde P60 transmission shaft cross member all models24x63 mm (attention 2 per vehicle)
(98,00 € HT)
Bearing bearings dimension 49.25 mm (0.75) - Citroen Traction HY U23
Bearing bearings dimension 49.25 (0.75) -Citroen: a- Traction Perfo and 11D - HY until 1963 ("Traction" type engine)- U23
(398,00 € HT)
Set of 4 complete pistons - Ø 76.00 mm - Renault Prima 4 and KZ - flat
Set of 4 complete pistons (axles + segments) - axle 18 mm - axle height 51 mm - Piston Ø 76.00 mm - Renault Prima 4 and KZ - flat - Unit price
(831,67 € HT)
Calibrouge (Plastigage) mechanical clearance measurement
"Plastigage"The Calibrouge ("plastigage or plastigauge") is a simple and practical tool for measuring the clearances of your bearings. Range of use: operating clearance from 0.025 to 0.175 mm
(22,50 € HT)
Renault Fregate inter manifold seal
gasket placed between ADM / ECH manifold for Renault Fregate engine or similar
(7,00 € HT)
Exhaust assembly 102101-103 VERS
(738,06 € HT)
Flector transmission - Simca 9 dovetail P60 all models
Flector transmission - Simca 9 dovetail P60 all models
(90,00 € HT)
piston ring set Ø 78 mm Citroen Traction U23 HY 2x2.5x5 - 4cyl
Segment set Ø 78 mm Citroen Traction 2x2.5x5 - 4cyl
(94,50 € HT)
Engine paint black RAL 9005 - 500 ml
Black paint - 500 ml jarSuitable for engines, housings, gearboxes, differentials, brake drums and all parts subject to heating in cast iron, steel and light alloys.Direct application on degreased metal (or better, treated with our Phosprim 4090), ...
(34,00 € HT)
sticker Simca oil filter
Sticker for oil filter and breather plug. Mounts on V8 engine
(9,63 € HT)
modification cylindre avec piston alu creux 14mm
(20,00 € HT)
Set 4 Pistons 56.50 - axle 16 mm - Rosengart LR
Set of 4 pistons for Rosengart LR2, LR4, LR4N2, and derivatives. Current manufacture - Bore 56.00 - 56.50 - 57.00 - 57.50 - 58.00 mm For 12 mm or 16 mm axle (to be specified when ordering). Supplied with axles, segments, circlips. Possibility of ...
(1 075,00 € HT)
Fuel pump WITH lever Simca Ariane4 Aronde P60
Fuel pump with primer. Supplied with base gasket.
(37,50 € HT)
Connecting rod bearings (the set) dimension 0.75 mm - Citroen Traction 11D - HY -U23
Set of 47.25 mm connecting rod bearings - dimension 0.75 mm - Citroen Traction 11D - HY - U23Mounts on engines equipped with bearing connecting rods.
(85,00 € HT)
Ignition head Ducellier 65 mm
Head for Ducellier distributor: Interlocking inside the head = 65 mm, outside about 72 mm.To be assembled with breakers 1 237 013 808, and ducellier finger.
(20,42 € HT)
Remise en état lot de pièces spécifiques
(90,00 € HT)
Set 4 Pistons 57.00 - axle 16 mm - Rosengart LR
Set of 4 pistons for Rosengart LR2, LR4, LR4N2, and derivatives. Current manufacture - Bore 56.00 - 56.50 - 57.00 - 57.50 - 58.00 mm For 12 mm or 16 mm axle (to be specified when ordering). Supplied with axles, segments, circlips. Possibility of ...
(1 075,00 € HT)
Head gasket + 4 x manifold gaskets - Renaul NN
Includes:- 1x copper cylinder head gasket- 1 x 3-hole gasket for the manifold- 2 x small oval gaskets- 1 x large oval seal
(176,25 € HT)
Connecting rod bearings (set) 47.00 mm dimension 1.00 - Citroen Traction 11D - HY -U23
Conrod bearing set 47.00 mm - dimension 1.00 mm - Citroen Traction 11D - HY - U23Mounts on engines equipped with bearing connecting rods.
(85,00 € HT)
Piston x 4 complete Ø 75.00 mm - Simca Aronde P60 - Flash and Rush
Set of 4 piston Ø 75.00 mm - Simca Aronde P60 - Flash and RushSupplied complete with pins - segments - clips
(615,00 € HT)
Pellet - set of 4 - Ford Vedette cylinder heads
Set of 4 18.4 mm pellets for Ford Vedette cylinder heads
(43,00 € HT)
Gasket x 2 on rocker arm Renault fregate Goelette Prairie
2 seals for rocker shaft. Mounts for Renault gasoline engine 668, 671, 817, mounted on Frégate, Prairie, R2087, SG2, Goélette and derivatives.
(16,00 € HT)
Set Segments Ø 58.00 2x2x3 - Rosengart LR (set of 12)
Set of 16 segments (4 per piston) for LR2, LR4, LR4N2 engines and derivatives. Bore 58. Attention in case of error on your part, these products cannot be taken back.- 8 x compression h 2mm- 4 x scraper h 3 mmContact us for other sizes.
(150,98 € HT)
Valve guide Ø 9 X 13.06 X 55 - CITROeN Traction 11 - HY - U23
Valve guide Ø 9 X 13.06 X 55 - CITROËN Traction 11 - HY - U23 -Cast iron material
(47,17 € HT)
Valves x 4 - ADM Ø 35x8.5x121.7 45 ° - Peugeot 203
Set of 4 ADM valves Ø 35x8.5x121.7 angle 45 ° - Peugeot 203
(96,00 € HT)
Complete pistons - set of 4 - Ø 74.50 mm - Simca Aronde P60 ARIANE - Flash and Rush engine
Set of 4 piston Ø 74.50 mm - Simca Aronde P60 - Flash and RushSupplied complete with pins - segments - clips
(615,00 € HT)
Ford Vedette dynamo-fan belt
Secondary propeller-dynamo belt for Ford Vedette
(15,00 € HT)
CHAMBORD exhaust - n2 - stainless steel primary tube - Simca Chambord
Primary tube between the "Y" and the silencer - Part 2 on the photoAll stainless steel.
(91,65 € HT)
Head gasket (2-stage engine) - Peugeot 201
Head gasket (2-stage engine) - Peugeot 201
(133,33 € HT)
Sedis belt injection pump 404 and 504 Peugeot
Sedis 404 and 504 Peugeot injection pump belt. High quality manufacturing.
(99,17 € HT)
Valves x 4 - ADM Ø 35x8.5x116.4 - Peugeot 203
Valves x 4 - ADM Ø 35x8.5x116.4 - Peugeot 203
(110,00 € HT)
Complete pistons - set of 4 - Ø 74.00 mm - Simca Aronde P60 ARIANE - Flash and Rush engine
Complete pistons - set of 4 - Ø 74.00 mm - Simca Aronde P60 ARIANE - Flash and Rush engine
(615,00 € HT)
Exhaust - stainless steel oval silencer - Ford Vedette
Stainless steel silencer for Ford Vedette.
(359,77 € HT)
Central intake gasket Ford Vedette Simca
Central gasket intake housing for Vedette Ford and Simca.
(50,00 € HT)
Copper cylinder head gasket - Citroen trefle 5HP
Copper cylinder head gasket - Citroen trefle
(145,00 € HT)
Piston x 4 - Ø 75.50 mm - Citroen C4G
Piston Ø 75.50 mm - Citroen C4G - Set of 4
(793,00 € HT)
Segments set Ø 72 mm Citroen Traction U23 HY 2x2.5x5 - 4cyl
Piston ring set Ø 72 mm Citroen Traction 2 x 2.5 x 5 - 4 cyl
(94,50 € HT)
Ford Vedette oil pump pinion
Replacement gear for oil pump - V8 Ford Vedette. Supplied with 4 rivets. (Advantageously replaces the celoron one that has become fragile over time)Attention for the V8 Simca 13 hp 2350 cm3, choose the reference "Simca oil pump pinion" on our shop.